-- *****************************************************************
-- CISCO-POWER-ETHERNET-CAPABILITY.my:
-- Cisco POWER-ETHERNET-MIB AGENT-CAPABILITIES
--   
-- June 2004, Seth Wang
--   
-- Copyright (c) 2004, 2006-2007, 2009-2012 by Cisco Systems Inc.
-- All rights reserved.
-- ****************************************************************

CISCO-POWER-ETHERNET-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY
        FROM SNMPv2-SMI
    AGENT-CAPABILITIES
        FROM SNMPv2-CONF
    ciscoAgentCapability
        FROM CISCO-SMI;

ciscoPowerEthernetCapability MODULE-IDENTITY
    LAST-UPDATED    "201209040000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "       Cisco Systems
                    Customer Service

            Postal: 170 West Tasman Drive
                    San Jose, CA  95134
                    USA

               Tel: +1 800 553-NETS

            E-mail: cs-lan-switch-snmp@cisco.com"
    DESCRIPTION
        "The capabilities description of
        POWER-ETHERNET-MIB."
    REVISION        "201209040000Z"
    DESCRIPTION
        "Added capability statement
        cPowerEthernetCapV15RO101SYPCat6K."
    REVISION        "201204060000Z"
    DESCRIPTION
        "Added capability statement 
        cPowerEthernetCapV12RO233SXJ2PCat6K.
         
        Modified VARIATION of pethPsePortPowerPairs in 
        cPowerEthernetCapV12RO233SXHPCat6K.

        Removed VARIATION of pethPsePortPowerPairsControlAbility 
        from cPowerEthernetCapCatOSV08R0401 and 
        cPowerEthernetCapV12RO233SXHPCat6K."
    REVISION        "200902140000Z"
    DESCRIPTION
        "Added capability statement
        cPowerEthernetCapV12RO252SGPCat4K."
    REVISION        "200707090000Z"
    DESCRIPTION
        "Added capability statement
        cPowerEthernetCapV12RO233SXHPCat6K."
    REVISION        "200702080000Z"
    DESCRIPTION
        "Added a new AGENT-CAPABILITIES cPowerEthernetCapC3kV122SR035 for
        c3550"
    REVISION        "200605310000Z"
    DESCRIPTION
        "Added the VARIATION for
        pethPsePortPowerPriority in 
        cPowerEthernetCapCatOSV08R0401."
    REVISION        "200406280000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoAgentCapability 412 }



cPowerEthernetCapCatOSV08R0401 AGENT-CAPABILITIES
    PRODUCT-RELEASE "Cisco CatOS 8.4(1)."
    STATUS          current
    DESCRIPTION
        "POWER-ETHERNET-MIB capabilities."

    SUPPORTS        POWER-ETHERNET-MIB
    INCLUDES        {
                        pethPsePortGroup,
                        pethPsePortNotificationGroup,
                        pethNotificationControlGroup,
                        pethMainPseGroup,
                        pethMainPowerNotificationGroup
                    }

    VARIATION       pethPsePortPowerPairs
    SYNTAX          INTEGER  {
                        signal(1)
                    }
    DESCRIPTION
        "Only a limited set of enumerated values
        is supported."

    VARIATION       pethPsePortType
    ACCESS          read-only
    DESCRIPTION
        "Unable to set this in CatOS."

    VARIATION       pethPsePortPowerPriority
    ACCESS          read-only
    DESCRIPTION
        "Unable to set this in CatOS."

    ::= { ciscoPowerEthernetCapability 1 }

cPowerEthernetCapC3kV122SR035 AGENT-CAPABILITIES
    PRODUCT-RELEASE "CISCO IOS 12.2S(0.35) for cat3k"
    STATUS          current
    DESCRIPTION
        "POWER-ETHERNET-MIB Capabilities"

    SUPPORTS        POWER-ETHERNET-MIB
    INCLUDES        {
                        pethPsePortGroup,
                        pethMainPseGroup,
                        pethNotificationControlGroup,
                        pethPsePortNotificationGroup,
                        pethMainPowerNotificationGroup
                    }
    VARIATION       pethPsePortPowerPairs
    ACCESS          read-only
    DESCRIPTION
        "Read-only access is supported."

    VARIATION       pethPsePortPowerPriority
    SYNTAX          INTEGER  {
                        high(2),
                        low(3)
                    }
    DESCRIPTION
        "Value Critical(1) is not supported on c3750/c3560/c3550 and
        Value High(2) is not supported on c3550"

    VARIATION       pethPsePortMPSAbsentCounter
    DESCRIPTION
        "Returns zero always."

    VARIATION       pethPsePortOverLoadCounter
    DESCRIPTION
        "Returns zero always."

    VARIATION       pethPsePortType
    ACCESS          read-only
    DESCRIPTION
        "Read-only access is supported."

    VARIATION       pethMainPseOperStatus
    SYNTAX          INTEGER  {
                        on(1),
                        off(2)
                    }
    DESCRIPTION
        "The value Faulty(3) is not supported on c3750/c3560/c3550."

    VARIATION       pethMainPseConsumptionPower
    DESCRIPTION
        "This gives total allocated power instead of total actual
        consumed power for c3750/c3560/c3550."

    ::= { ciscoPowerEthernetCapability 2 }

cPowerEthernetCapV12RO233SXHPCat6K AGENT-CAPABILITIES
    PRODUCT-RELEASE "Cisco IOS 12.2(33)SXH on Catalyst 6000/6500
                    series devices."
    STATUS          current
    DESCRIPTION
        "POWER-ETHERNET-MIB capabilities."

    SUPPORTS        POWER-ETHERNET-MIB
    INCLUDES        {
                        pethPsePortGroup,
                        pethPsePortNotificationGroup,
                        pethNotificationControlGroup,
                        pethMainPseGroup
                    }

    VARIATION       pethPsePortPowerPairs
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethPsePortType
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethPsePortPowerPriority
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethMainPseUsageThreshold
    ACCESS          not-implemented
    DESCRIPTION
        "This object is not supported."

    ::= { ciscoPowerEthernetCapability 3 }

cPowerEthernetCapV12RO252SGPCat4K AGENT-CAPABILITIES
    PRODUCT-RELEASE "Cisco IOS 12.2(52)SG on CAT4K family
                    switches."
    STATUS          current
    DESCRIPTION
        "POWER-ETHERNET-MIB capabilities."

    SUPPORTS        POWER-ETHERNET-MIB
    INCLUDES        {
                        pethPsePortGroup,
                        pethPsePortNotificationGroup,
                        pethNotificationControlGroup,
                        pethMainPseGroup
                    }
    VARIATION       pethPsePortPowerPairs
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethPsePortType
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethPsePortPowerPriority
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethMainPseUsageThreshold
    ACCESS          not-implemented
    DESCRIPTION
        "This object is not supported."

    ::= { ciscoPowerEthernetCapability 4 }

cPowerEthernetCapV12RO233SXJ2PCat6K AGENT-CAPABILITIES
    PRODUCT-RELEASE "Cisco IOS 12.2(33)SXJ2 on Catalyst 6000/6500
                    series devices."
    STATUS          current
    DESCRIPTION
        "POWER-ETHERNET-MIB capabilities."

    SUPPORTS        POWER-ETHERNET-MIB
    INCLUDES        {
                        pethPsePortGroup,
                        pethPsePortNotificationGroup,
                        pethNotificationControlGroup,
                        pethMainPseGroup
                    }

    VARIATION       pethPsePortPowerPairs
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethPsePortType
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethMainPseUsageThreshold
    ACCESS          not-implemented
    DESCRIPTION
        "This object is not supported."

    ::= { ciscoPowerEthernetCapability 5 }

cPowerEthernetCapV15RO101SYPCat6K AGENT-CAPABILITIES
    PRODUCT-RELEASE "Cisco IOS 15.1(1)SY on Catalyst 6000/6500
                    series devices."
    STATUS          current
    DESCRIPTION
        "POWER-ETHERNET-MIB capabilities."

    SUPPORTS        POWER-ETHERNET-MIB
    INCLUDES        {
                        pethPsePortGroup,
                        pethPsePortNotificationGroup,
                        pethNotificationControlGroup,
                        pethMainPseGroup
                    }

    VARIATION       pethPsePortPowerPairs
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethPsePortType
    ACCESS          read-only
    DESCRIPTION
        "Write access is not supported."

    VARIATION       pethMainPseUsageThreshold
    ACCESS          not-implemented
    DESCRIPTION
        "This object is not supported."

    ::= { ciscoPowerEthernetCapability 6 }
END