-- ***************************************************************** -- DLINKES-ERPS-MIB.mib : Ethernet Ring Protection Switching MIB -- -- Copyright (c) 2014 D-Link Corporation, all rights reserved. -- -- ***************************************************************** DLINKES-ERPS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI RowStatus, MacAddress, TruthValue, DisplayString FROM SNMPv2-TC NOTIFICATION-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF InterfaceIndexOrZero FROM IF-MIB VlanIdOrNone FROM Q-BRIDGE-MIB Dlink2kVlanList FROM DLINKES-TC-MIB dlinkCommon FROM DLINK-ID-REC-MIB; dlinkEsErpsMIB MODULE-IDENTITY LAST-UPDATED "201512160000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO " D-Link Corporation Postal: No. 289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C Tel: +886-2-66000123 E-mail: tsd@dlink.com.tw " DESCRIPTION "The MIB module for managing Ethernet Ring Protection Switching." REVISION "201512160000Z" DESCRIPTION "Modify the MAX-ACCESS of both esErpsEtherRingInstanceId and esErpsEtherSubRingInstanceId from read-write to not-accessible; Add the esErpsEtherRingInstanceId and esErpsEtherSubRingInstanceId as the index of esErpsEtherSubRingEntry" REVISION "201510300000Z" DESCRIPTION "Modify the tab character to blank character on the description of esErpsEtherRingEntry and esErpsInstEntry" REVISION "201509230000Z" DESCRIPTION "Modify the description of esErpsInstAdminSwitchMode to indicate its default value for ERPS v2; Modify the description of esErpsInstAdminSwtichRingPort to indicate its default value for ERPS v2; Modify the description of esErpsEtherRingAdminPort1IfIdx to indicates when the interconnect node is a local node endpoint of an open ring " REVISION "201505070000Z" DESCRIPTION "Modify the description of some node which only accessible for ERPS v2" REVISION "201501080000Z" DESCRIPTION "Add esErpsVersion,esErpsEtherRingId,esErpsEtherRingType,esErpsEtherRingInstanceId, esErpsEtherSubRingInstanceId,esErpsInstAdminSwitchMode,esErpsInstAdminSwtichRingPort for ERPS v2 implementation." REVISION "201301180000Z" DESCRIPTION "This is the first version of the MIB file for 'ERPS' functionality." ::= { dlinkCommon 78 } -- ----------------------------------------------------------------------------- esErpsMIBNotification OBJECT IDENTIFIER ::= { dlinkEsErpsMIB 0 } esErpsMIBObjects OBJECT IDENTIFIER ::= { dlinkEsErpsMIB 1 } esErpsMIBConformance OBJECT IDENTIFIER ::= { dlinkEsErpsMIB 2 } -- ----------------------------------------------------------------------------- esErpsGenCtrl OBJECT IDENTIFIER ::= { esErpsMIBObjects 1 } esErpsNotificationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether sending notification for ERPS state change or RPL owner conflict event." ::= { esErpsGenCtrl 3 } -- esErpsVersion OBJECT-TYPE -- SYNTAX INTEGER{ -- g8032v1(0), -- g8032v2(1) -- } -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "This object indicates the administratively configured ring version." -- DEFVAL { 1 } -- ::= { esErpsGenCtrl 4 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- esErpsProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF EsErpsProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of G8032 profiles." ::= { esErpsMIBObjects 2 } esErpsProfileEntry OBJECT-TYPE SYNTAX EsErpsProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains information about a G8032 profile. An entry is created/removed when a G8032 profile is defined or deleted." INDEX { esErpsProfName } ::= { esErpsProfileTable 1 } EsErpsProfileEntry ::= SEQUENCE { esErpsProfName DisplayString, esErpsProfRowStatus RowStatus, esErpsProfTcnPropagationEnabled TruthValue, esErpsProfRevertiveEnabled TruthValue, esErpsProfGuardTimer Unsigned32, esErpsProfHoldOffTimer Unsigned32, esErpsProfWtrTimer Unsigned32 } esErpsProfName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the G8032 profile." ::= { esErpsProfileEntry 1 } esErpsProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row." ::= { esErpsProfileEntry 2 } esErpsProfTcnPropagationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the propagation of topology change notification from sub ERP instance to major instance is enabled or not for the G8032 profile." DEFVAL { false } ::= { esErpsProfileEntry 3 } esErpsProfRevertiveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether restoring to the working transport entity, i.e. blocked on the RPL of the entry. In non-revertive operation, the traffic channel continues to use the RPL, if it is not failed, after a switch link defect condition has cleared." DEFVAL { true } ::= { esErpsProfileEntry 4 } esErpsProfGuardTimer OBJECT-TYPE SYNTAX Unsigned32 ( 10..2000 ) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the guard timer in milliseconds for an ERP domain. The valid range is 10 to 2000. The value should be multiple of 10." DEFVAL { 500 } ::= { esErpsProfileEntry 5 } esErpsProfHoldOffTimer OBJECT-TYPE SYNTAX Unsigned32 ( 0..10 ) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the hold-off timer in seconds for an ERP domain. The valid range is 0 to 10." DEFVAL { 0 } ::= { esErpsProfileEntry 6 } esErpsProfWtrTimer OBJECT-TYPE SYNTAX Unsigned32 ( 1..12 ) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the WTR timer in minutes for an ERP domain. The valid range is 1 to 12." DEFVAL { 5 } ::= { esErpsProfileEntry 7 } -- ----------------------------------------------------------------------------- esErpsEtherRingTable OBJECT-TYPE SYNTAX SEQUENCE OF EsErpsEtherRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration of the G8032 physical rings." ::= { esErpsMIBObjects 3 } esErpsEtherRingEntry OBJECT-TYPE SYNTAX EsErpsEtherRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains G8032 physical ring inforamtion. An entry is created/removed when a G8032 physical ring is defined or deleted. " INDEX { esErpsEtherRingName } ::= { esErpsEtherRingTable 1 } EsErpsEtherRingEntry ::= SEQUENCE { esErpsEtherRingName DisplayString, esErpsEtherRingRowStatus RowStatus, esErpsEtherRingAdminPort0IfIdx InterfaceIndexOrZero, esErpsEtherRingAdminPort1IfIdx InterfaceIndexOrZero, esErpsEtherRingId Unsigned32, esErpsEtherRingType INTEGER } esErpsEtherRingName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the G8032 ring." ::= { esErpsEtherRingEntry 1 } esErpsEtherRingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row." ::= { esErpsEtherRingEntry 2 } esErpsEtherRingAdminPort0IfIdx OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ifIndex of the interface which is the configured first ring port of the physical ring. The interface can be physical port or port-channel interface. The special value of zero indicates the first ring port is not specified. " DEFVAL { 0 } ::= { esErpsEtherRingEntry 3 } esErpsEtherRingAdminPort1IfIdx OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ifIndex of the interface which is the configured second ring port of the physical ring. The interface can be physical port or port-channel interface. Setting this object to -1 indicates that the interconnect node is a local node endpoint of an open ring. The special value of zero indicates the second ring port is not specified." DEFVAL { 0 } ::= { esErpsEtherRingEntry 4 } esErpsEtherRingId OBJECT-TYPE SYNTAX Unsigned32 ( 1..239 ) MAX-ACCESS read-create STATUS current DESCRIPTION "This object configures the ring id. The valid range is 1 to 239. For ERPSv1, the node is not accessible and always return 0xff for read operation." DEFVAL { 1 } ::= { esErpsEtherRingEntry 5 } esErpsEtherRingType OBJECT-TYPE SYNTAX INTEGER{ majorRing(1), subRing(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the administratively configured ring type. For ERPSv1, the node is not accessible and always return 0xff for read operation." ::= { esErpsEtherRingEntry 6 } -- ----------------------------------------------------------------------------- esErpsEtherSubRingTable OBJECT-TYPE SYNTAX SEQUENCE OF EsErpsEtherSubRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains sub ring configuration of the G8032 physical rings." ::= { esErpsMIBObjects 4 } esErpsEtherSubRingEntry OBJECT-TYPE SYNTAX EsErpsEtherSubRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains a sub ring setting of a physical ring. An entry is created/removed when a sub ring is specified or removed. For ERPSv1,please use ring name and sub-ring name to do association,ignore esErpsEtherRingInstanceId and esErpsEtherSubRingInstanceId. For ERPSv2, add an association method to use ring instance id and sub-ring instance id. " INDEX { esErpsEtherRingName, esErpsEtherSubRingName, esErpsEtherRingInstanceId, esErpsEtherSubRingInstanceId } ::= { esErpsEtherSubRingTable 1 } EsErpsEtherSubRingEntry ::= SEQUENCE { esErpsEtherSubRingName DisplayString, esErpsEtherSubRingRowStatus RowStatus, esErpsEtherRingInstanceId Unsigned32, esErpsEtherSubRingInstanceId Unsigned32 } esErpsEtherSubRingName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the sub ring." ::= { esErpsEtherSubRingEntry 1 } esErpsEtherSubRingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row." ::= { esErpsEtherSubRingEntry 2 } esErpsEtherRingInstanceId OBJECT-TYPE SYNTAX Unsigned32 ( 1..32 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the ring instance id." ::= { esErpsEtherSubRingEntry 3 } esErpsEtherSubRingInstanceId OBJECT-TYPE SYNTAX Unsigned32 ( 1..32 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the sub ring instance id." ::= { esErpsEtherSubRingEntry 4 } -- ----------------------------------------------------------------------------- esErpsInstTable OBJECT-TYPE SYNTAX SEQUENCE OF EsErpsInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of ERP instance configuration and status information." ::= { esErpsMIBObjects 5 } esErpsInstEntry OBJECT-TYPE SYNTAX EsErpsInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry contains information about an ERP instance. The first instance identifier index value (esErpsEtherRingName) identifies the esErpsEtherRingEntry that an ERP instance (esErpsInstEntry) belongs to. An entry is removed from this table when its corresponding esErpsEtherRingEntry is deleted. An entry is created/removed when an ERP instance is defined or deleted." INDEX { esErpsEtherRingName, esErpsInstInstanceId } ::= { esErpsInstTable 1 } EsErpsInstEntry ::= SEQUENCE { esErpsInstInstanceId Unsigned32, esErpsInstRowStatus RowStatus, esErpsInstDescription DisplayString, esErpsInstMel Unsigned32, esErpsInstProfile DisplayString, esErpsInstApsChannelVlanId VlanIdOrNone, esErpsInstIncludeVlansFirst2K Dlink2kVlanList, esErpsInstIncludeVlansSecond2K Dlink2kVlanList, esErpsInstAdminRplPort INTEGER, esErpsInstOperRplPort INTEGER, esErpsInstAdminRplNodeRole INTEGER, esErpsInstOperRplNodeRole INTEGER, esErpsInstOperPort0IfIdx InterfaceIndexOrZero, esErpsInstOperPort0State INTEGER, esErpsInstOperPort1IfIdx InterfaceIndexOrZero, esErpsInstOperPort1State INTEGER, esErpsInstAdminActivate TruthValue, esErpsInstInstanceState INTEGER, esErpsInstAdminSwitchMode INTEGER, esErpsInstAdminSwtichRingPort INTEGER } esErpsInstInstanceId OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the ERP instance." ::= { esErpsInstEntry 1 } esErpsInstRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row." ::= { esErpsInstEntry 2 } esErpsInstDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates a description for the ERP instance. A zero length string indicates the description is not specified." ::= { esErpsInstEntry 3 } esErpsInstMel OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ring MEL value of the ERP instance." ::= { esErpsInstEntry 4 } esErpsInstProfile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of the G8032 profile to be associated with the ERP instance. A zero length string indicates the associated profile is not specified." ::= { esErpsInstEntry 5 } esErpsInstApsChannelVlanId OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the APS channel VLAN for the ERP instance. A special value of 0 indicates the APS channel VLAN is not specified." ::= { esErpsInstEntry 6 } esErpsInstIncludeVlansFirst2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the service protected VLANs of ERP instance in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is configured to be protected by the Ethernet ring protection mechanism." ::= { esErpsInstEntry 7 } esErpsInstIncludeVlansSecond2K OBJECT-TYPE SYNTAX Dlink2kVlanList MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the service protected VLANs of ERP instance in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN is configured to be protected by the Ethernet ring protection mechanism." ::= { esErpsInstEntry 8 } esErpsInstAdminRplPort OBJECT-TYPE SYNTAX INTEGER{ port0(0), port1(1), none(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the administratively configured RPL port of the entry. port0(0) - Specify port0 as the RPL port. port1(1) - Specify port1 as the RPL port. none(2) - The RPL port is not specified. " ::= { esErpsInstEntry 9 } esErpsInstOperRplPort OBJECT-TYPE SYNTAX INTEGER { port0(0), port1(1), none(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational RPL port of the entry." ::= { esErpsInstEntry 10 } esErpsInstAdminRplNodeRole OBJECT-TYPE SYNTAX INTEGER{ none(0), owner(1), neighbor(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the administratively configured node role. This object has to be none(0) if administrative RPL port is not specified." ::= { esErpsInstEntry 11 } esErpsInstOperRplNodeRole OBJECT-TYPE SYNTAX INTEGER{ none(0), owner(1), neighbor(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current ring node role." ::= { esErpsInstEntry 12 } esErpsInstOperPort0IfIdx OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the ifIndex of the operational first ring port of the physical ring. The value of administrative port0 inherits esErpsEtherRingAdminPort0IfIdx of physical ring to which the instance belongs. The special value of zero indicates the operational port0 is not available." ::= { esErpsInstEntry 13 } esErpsInstOperPort0State OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), forwarding(2), blocked(3), virtualChannel(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational state of port0." ::= { esErpsInstEntry 14 } esErpsInstOperPort1IfIdx OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the ifIndex of the operational second ring port of the physical ring. The value of administrative port1 inherits esErpsEtherRingAdminPort1IfIdx of physical ring to which the instance belongs. The special value of zero indicates the operational port1 is not available." ::= { esErpsInstEntry 15 } esErpsInstOperPort1State OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), forwarding(2), blocked(3), virtualChannel(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational state of port1." ::= { esErpsInstEntry 16 } esErpsInstAdminActivate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the administrative state of the ERP instance. Setting this object to 'true' activates the ERP instance. Setting this object to 'false' deactivates the ERP instance." DEFVAL { false } ::= { esErpsInstEntry 17 } esErpsInstInstanceState OBJECT-TYPE SYNTAX INTEGER { deactivated(0), nonOperational(1), init(2), idle(3), protection(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current ring node state of the ERP instance. The state could be: deactivated(0) : The ERP instance is deactivated. nonOperational(1) : The ERP instance is enabled but is not activated due to inconsistent setting. init(2) : The instance is initializing. idle(3) : The instance is in normal state. The RPL port is blocked. protection(4) : The instance detects failure at some ring port. The RPL port is restored to protect the port." ::= { esErpsInstEntry 18 } esErpsInstAdminSwitchMode OBJECT-TYPE SYNTAX INTEGER { forceBlock(1), manualBlock(2), clearBlock(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the designated ring port switch mode.For ERPSv1, the node is not accessible and always return 0xff for read operation; For ERPSv2, its default value is 0xff indicate there is no operation on this node." ::= { esErpsInstEntry 19 } esErpsInstAdminSwtichRingPort OBJECT-TYPE SYNTAX INTEGER { port0(0), port1(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the designated ring port. For ERPSv1, the node is not accessible and always return 0xff for read operation; For ERPSv2, its default value is 0xff indicate there is no operation on this node." ::= { esErpsInstEntry 20 } -- ----------------------------------------------------------------------------- esErpsEventInfo OBJECT IDENTIFIER ::= { esErpsMIBObjects 6 } esErpsEventNodeId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address included in the notification currently being sent, indicating the ring node that is involved the ERPS event." ::= { esErpsEventInfo 1 } -- *************************************************************************** -- Notifications -- *************************************************************************** esErpsFailuredetectedNotif NOTIFICATION-TYPE OBJECTS {esErpsEventNodeId } STATUS current DESCRIPTION "A esErpsFailureNotification is sent when esErpsNotificationEnabled is 'true' and a signal failure is detected." ::= { esErpsMIBNotification 1 } esErpsFailureClearedNotif NOTIFICATION-TYPE OBJECTS {esErpsEventNodeId } STATUS current DESCRIPTION "A esErpsFailureClearedNotif is sent when esErpsNotificationEnabled is 'true' and a signal failure is cleared." ::= { esErpsMIBNotification 2 } esErpsRPLOwnerConflictNotif NOTIFICATION-TYPE OBJECTS {esErpsEventNodeId } STATUS current DESCRIPTION "A esErpsOwnerConflictNotif is sent when esErpsNotificationEnabled is 'true' and RPL owner conflict is detected." ::= { esErpsMIBNotification 3 } -- *************************************************************************** -- Conformance -- *************************************************************************** esErpsCompliances OBJECT IDENTIFIER ::= { esErpsMIBConformance 1 } esErpsCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the DLINKSW-ERPS-MIB." MODULE -- this module MANDATORY-GROUPS { esErpsInstanceGroup, esErpsProfileCfgGroup, esErpsNotifyCfgGroup, esErpsNotificationGroup } ::= { esErpsCompliances 1 } esErpsGroups OBJECT IDENTIFIER ::= { esErpsMIBConformance 2 } esErpsInstanceGroup OBJECT-GROUP OBJECTS { esErpsEtherRingRowStatus, esErpsEtherRingAdminPort0IfIdx, esErpsEtherRingAdminPort1IfIdx, esErpsEtherRingId, esErpsEtherRingType, esErpsEtherSubRingRowStatus, esErpsInstRowStatus, esErpsInstInstanceState, esErpsInstAdminSwitchMode, esErpsInstAdminSwtichRingPort, esErpsInstDescription, esErpsInstMel, esErpsInstProfile, esErpsInstApsChannelVlanId, esErpsInstIncludeVlansFirst2K, esErpsInstIncludeVlansSecond2K, esErpsInstAdminRplPort, esErpsInstOperRplPort, esErpsInstAdminRplNodeRole, esErpsInstOperRplNodeRole, esErpsInstOperPort0IfIdx, esErpsInstOperPort0State, esErpsInstOperPort1IfIdx, esErpsInstOperPort1State, esErpsInstAdminActivate } STATUS current DESCRIPTION "A collection of objects provides the RPS instance configuration and status information." ::= { esErpsGroups 1 } esErpsProfileCfgGroup OBJECT-GROUP OBJECTS { esErpsProfRowStatus, esErpsProfTcnPropagationEnabled, esErpsProfRevertiveEnabled, esErpsProfGuardTimer, esErpsProfHoldOffTimer, esErpsProfWtrTimer } STATUS current DESCRIPTION "A collection of objects provides the profile configuration for ERPS." ::= { esErpsGroups 2 } esErpsNotifyCfgGroup OBJECT-GROUP OBJECTS { esErpsNotificationEnabled, esErpsEventNodeId } STATUS current DESCRIPTION "A collection of objects about the information for ERPS notification. " ::= { esErpsGroups 3 } esErpsNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { esErpsFailuredetectedNotif, esErpsFailureClearedNotif, esErpsRPLOwnerConflictNotif } STATUS current DESCRIPTION "The collection of notifications used for monitoring ERPS status" ::= { esErpsGroups 4 } END