--  *****************************************************************
--  DLINKES-PBR-MIB.mib : Policy Based Route MIB
-- 
--  Copyright (c) 2013 D-Link Corporation, all rights reserved.
--   
--  *****************************************************************
DLINKES-PBR-MIB DEFINITIONS ::= BEGIN

    IMPORTS        
        MODULE-IDENTITY,
        NOTIFICATION-TYPE,
        OBJECT-TYPE,
        Unsigned32
            FROM SNMPv2-SMI
        MODULE-COMPLIANCE, 
        OBJECT-GROUP
		    FROM SNMPv2-CONF
        InterfaceIndex        
            FROM IF-MIB 
        InetAddressType
            FROM INET-ADDRESS-MIB
        DisplayString,
        RowStatus
            FROM SNMPv2-TC
        dlinkCommon
            FROM DLINK-ID-REC-MIB;


    dlinkEsPbrMIB MODULE-IDENTITY
        LAST-UPDATED "201411170000Z"
        ORGANIZATION "D-Link Corp."
        CONTACT-INFO
            "         D-Link Corporation
             Postal: No. 289, Sinhu 3rd Rd., Neihu District,
                     Taipei City 114, Taiwan, R.O.C
             Tel:    +886-2-66000123
             E-mail: tsd@dlink.com.tw
            "        
        DESCRIPTION
            "This MIB module defines objects for Policy Based Route."

        REVISION "201301180000Z"
        DESCRIPTION "This is the first version of the MIB file for 
                     'Policy Based Route' functionality."

        REVISION "201411170000Z"
        DESCRIPTION "Support IPv6."

		::= { dlinkCommon 92 }

-- -----------------------------------------------------------------------------
    esPbrMIBNotifications    OBJECT IDENTIFIER ::= { dlinkEsPbrMIB 0 }
    esPbrMIBObjects          OBJECT IDENTIFIER ::= { dlinkEsPbrMIB 1 }
    esPbrMIBConformance      OBJECT IDENTIFIER ::= { dlinkEsPbrMIB 2 }

-- -----------------------------------------------------------------------------
-- esPbrMIBObjects
-- -----------------------------------------------------------------------------
    esPbrRmapTableNum  OBJECT-TYPE
        SYNTAX          Unsigned32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
            "Indicates the number of entries present in the esPbrRmapTable."
        ::= { esPbrMIBObjects 1 }
        
    esPbrRmapTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF EsPbrRmapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This Table lists the policy based route settings for VLAN interfaces.
            The Policy Based Route can enforce the policy to route the packet 
            received on an interface."
        ::= { esPbrMIBObjects 2 }

    esPbrRmapEntry OBJECT-TYPE
        SYNTAX      EsPbrRmapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in the esPbrRmapTable contains the name of associated route
            map."              
        INDEX   { esPbrRmapIfIndex, esPbrRmapInetAddrType}
        ::= { esPbrRmapTable 1 }

    EsPbrRmapEntry ::= SEQUENCE {
        esPbrRmapIfIndex         InterfaceIndex,
        esPbrRmapInetAddrType	InetAddressType,
        esPbrRmapName            DisplayString,
        esPbrRmapRowStatus      	RowStatus
    }

    esPbrRmapIfIndex     OBJECT-TYPE
        SYNTAX          InterfaceIndex
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
            "The ifIndex of the VLAN interface."
        ::= { esPbrRmapEntry 1 }

    esPbrRmapInetAddrType OBJECT-TYPE
        SYNTAX       InetAddressType
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
           "The IP address type of this interface. 
            ipv4(1) and ipv6(2) are the only two values supported in this MIB module."
           ::= { esPbrRmapEntry 2 }
           
    esPbrRmapName        OBJECT-TYPE
        SYNTAX          DisplayString 
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
            "This object indicates the associated route map which is used for 
            routing policy."
        ::= { esPbrRmapEntry 3 }
        
    esPbrRmapRowStatus OBJECT-TYPE
        SYNTAX          RowStatus
        MAX-ACCESS      read-create
        STATUS          current
        DESCRIPTION
            "The status of this conceptual row. This object is used to create,
            delete or modify route map association for a VLAN interface."
        ::= { esPbrRmapEntry 4 }

--  ***************************************************************************	
--  Conformance
--  ***************************************************************************
    esPbrMIBCompliances  OBJECT IDENTIFIER ::= { esPbrMIBConformance 1 }
    esPbrMIBGroups       OBJECT IDENTIFIER ::= { esPbrMIBConformance 2 }
	
	esPbrMIBCompliance   MODULE-COMPLIANCE
        STATUS          current   
        DESCRIPTION
            "The compliance statement for DLINKES-PBR-MIB."
        MODULE -- this module
        MANDATORY-GROUPS {  
            esPbrRmapBasicGroup 
        }                                                     
        ::= { esPbrMIBCompliances 1 }
        
    esPbrRmapBasicGroup OBJECT-GROUP
        OBJECTS    {      
            esPbrRmapTableNum,                 
            esPbrRmapName,          
            esPbrRmapRowStatus
        }
        STATUS          current
        DESCRIPTION
            "The collection of objects provides information for Policy
            Based Route table and route map configuration for VLAN 
            interfaces."
        ::= { esPbrMIBGroups 1 }                  
    
END