--  *****************************************************************
--  DLINKES-VLAN-TUNNEL-MIB.mib : VLAN Tunnel MIB
--
--  Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
--  *****************************************************************

DLINKES-VLAN-TUNNEL-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        dlinkCommon
            FROM DLINK-ID-REC-MIB
        InterfaceIndex
            FROM IF-MIB
        InetAddressIPv4, InetAddressIPv6, InetAddressPrefixLength
            FROM INET-ADDRESS-MIB
        VlanIdOrNone, VlanId
            FROM Q-BRIDGE-MIB
        OBJECT-GROUP, MODULE-COMPLIANCE
            FROM SNMPv2-CONF
        OBJECT-TYPE, MODULE-IDENTITY, Integer32
            FROM SNMPv2-SMI
        TruthValue, RowStatus, MacAddress
            FROM SNMPv2-TC;


    dlinkEsVlanTunnelMIB MODULE-IDENTITY
        LAST-UPDATED "201305150000Z"
        ORGANIZATION
            "D-Link Corp."
        CONTACT-INFO
            "   D-Link Corporation

            Postal: No. 289, Sinhu 3rd Rd., Neihu District,
                    Taipei City 114, Taiwan, R.O.C
            Tel:     +886-2-66000123
            E-mail: tsd@dlink.com.tw
            "
        DESCRIPTION
            "MIB module for displaying and configuring VLAN Tunnel related
            features in a device."
        REVISION "201305150000Z"
        DESCRIPTION
            "This is the first version of the MIB file for VLAN Tunnel functionality."
        ::= { dlinkCommon 37 }




--
-- Node definitions
--

    esVlanTunnelMIBNotifications OBJECT IDENTIFIER ::= { dlinkEsVlanTunnelMIB 0 }


    esVlanTunnelMIBObjects OBJECT IDENTIFIER ::= { dlinkEsVlanTunnelMIB 1 }


    esVlanTunnelInnerEtherType OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE (2))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This object is used to set the system's inner TPID."
        ::= { esVlanTunnelMIBObjects 1 }


    esVlanTunnelEtherTypeTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EsVlanTunnelEtherTypeEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of Dot1q tunnelling ethertype information about VLAN trunk
            mode interfaces."
        ::= { esVlanTunnelMIBObjects 2 }


    esVlanTunnelEtherTypeEntry OBJECT-TYPE
        SYNTAX EsVlanTunnelEtherTypeEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of Dot1q tunnelling ethertype information about each VLAN
            trunk mode interface."
        INDEX { esVlanTunnelEtherTypeIfIndex }
        ::= { esVlanTunnelEtherTypeTable 1 }


    EsVlanTunnelEtherTypeEntry ::=
        SEQUENCE {
            esVlanTunnelEtherTypeIfIndex
                InterfaceIndex,
            esVlanTunnelEtherType
                OCTET STRING
         }

    esVlanTunnelEtherTypeIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object indicates the module's VLAN trunk mode port interface."
        ::= { esVlanTunnelEtherTypeEntry 1 }


    esVlanTunnelEtherType OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE (2))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Specifies the outer TPID for each VLAN trunk mode interface."
        ::= { esVlanTunnelEtherTypeEntry 2 }


    esVlanTunnelInterfaceTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EsVlanTunnelInterfaceEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table that contains dot1q VLAN tunneling configuration on VLAN
            dot1q-tunnel mode interfaces."
        ::= { esVlanTunnelMIBObjects 3 }


    esVlanTunnelInterfaceEntry OBJECT-TYPE
        SYNTAX EsVlanTunnelInterfaceEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of dot1q VLAN tunneling configuration on each VLAN dot1q-tunnel
            mode interface."
        INDEX { esVlanTunnelIfIndex }
        ::= { esVlanTunnelInterfaceTable 1 }


    EsVlanTunnelInterfaceEntry ::=
        SEQUENCE {
            esVlanTunnelIfIndex
                InterfaceIndex,
            esVlanMappingMissDropEnabled
                TruthValue,
            esVlanTunnelTrustInnerPriEnabled
                TruthValue,
            esVlanTunnelInsertDot1qTag
                VlanIdOrNone
         }

    esVlanTunnelIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object indicates the module's VLAN dot1q-tunnel mode interfac number."
        ::= { esVlanTunnelInterfaceEntry 1 }


    esVlanMappingMissDropEnabled OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "If missdrop is enabled, when the original VLAN of the received packets
            cannot match the VLAN mapping entries or rules on this port, the received
            packets will be dropped."
        DEFVAL { false }
        ::= { esVlanTunnelInterfaceEntry 2 }


    esVlanTunnelTrustInnerPriEnabled OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "When enable the trusting inner priority, the priority of the do1q VLAN
            tag in the received packets will be copied to service VLAN tag."
        DEFVAL { false }
        ::= { esVlanTunnelInterfaceEntry 3 }


    esVlanTunnelInsertDot1qTag OBJECT-TYPE
        SYNTAX VlanIdOrNone
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "This object specifies the dot1q VLAN tag to be inserted into the untagged
            packets received on this 802.1q tunnel port as inner tag.
            The None means no dot1q VLAN tag to be inserted."
        DEFVAL { 0 }
        ::= { esVlanTunnelInterfaceEntry 4 }


    esVlanMappingTranslateTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EsVlanMappingTranslateEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table that contains VLAN translation entries for VLAN trunk port or
            service VLAN mapping translate entries for VLAN dot1q-tunnel port."
        ::= { esVlanTunnelMIBObjects 4 }


    esVlanMappingTranslateEntry OBJECT-TYPE
        SYNTAX EsVlanMappingTranslateEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of VLAN translation entries for a VLAN trunk port or service
            VLAN mapping translate entries for a VLAN dot1q-tunnel port."
        INDEX { esVlanMappingTranslateIfIndex, esVlanMappingTranslateOriginalVlan, esVlanMappingTranslateOriginalInnerVlan }
        ::= { esVlanMappingTranslateTable 1 }


    EsVlanMappingTranslateEntry ::=
        SEQUENCE {
            esVlanMappingTranslateIfIndex
                InterfaceIndex,
            esVlanMappingTranslateOriginalVlan
                VlanId,
            esVlanMappingTranslateOriginalInnerVlan
                VlanIdOrNone,
            esVlanMappingTranslateNewVlan
                VlanId,
            esVlanMappingTranslateNewInnerVlan
                VlanIdOrNone,
            esVlanMappingTranslatePriority
                Integer32,
            esVlanMappingTranslateRuleStatus
                INTEGER,
            esVlanMappingTranslateRowStatus
                RowStatus
         }

    esVlanMappingTranslateIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object indicates the module's interface number."
        ::= { esVlanMappingTranslateEntry 1 }


    esVlanMappingTranslateOriginalVlan OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object specifies the original VLAN ID that will be matched for
            incoming packets."
        ::= { esVlanMappingTranslateEntry 2 }


    esVlanMappingTranslateOriginalInnerVlan OBJECT-TYPE
        SYNTAX VlanIdOrNone
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object specifies original inner VID which is used to
            match the inner VID for incoming packets.
            None means the original inner VID is not specified."
        ::= { esVlanMappingTranslateEntry 3 }


    esVlanMappingTranslateNewVlan OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object specifies the translated service VLAN ID."
        ::= { esVlanMappingTranslateEntry 4 }


    esVlanMappingTranslateNewInnerVlan OBJECT-TYPE
        SYNTAX VlanIdOrNone
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object specifies the new inner VLAN ID that will
            replace original inner VLAN on VLAN trunk mode port.
            None means the new inner VID is not specified."
        DEFVAL { 0 }
        ::= { esVlanMappingTranslateEntry 5 }


    esVlanMappingTranslatePriority OBJECT-TYPE
        SYNTAX Integer32 (0..7)
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object specifies the priority for the entry. If no
            specified, the priority of the service VLAN tag will be set to 0."
        DEFVAL { 0 }
        ::= { esVlanMappingTranslateEntry 6 }


    esVlanMappingTranslateRuleStatus OBJECT-TYPE
        SYNTAX INTEGER
            {
            active(1),
            inactive(2)
            }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The 'active' status indicates this vlan mapping entry is effective
            on current port mode."
        ::= { esVlanMappingTranslateEntry 7 }


    esVlanMappingTranslateRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { esVlanMappingTranslateEntry 99 }


    esVlanMappingDot1qTunnelTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EsVlanMappingDot1qTunnelEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table contains service mapping tunnel entries for VLAN dot1q-tunnel
            port. Original VLANs can be a single VLAN or a VLAN range."
        ::= { esVlanTunnelMIBObjects 5 }


    esVlanMappingDot1qTunnelEntry OBJECT-TYPE
        SYNTAX EsVlanMappingDot1qTunnelEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of the VLAN mapping tunnel entries for a VLAN
            dot1q-tunnel port."
        INDEX { esVlanMappingDot1qTunnelIfIndex, esVlanMappingDot1qTunnelMinVID, esVlanMappingDot1qTunnelMaxVID }
        ::= { esVlanMappingDot1qTunnelTable 1 }


    EsVlanMappingDot1qTunnelEntry ::=
        SEQUENCE {
            esVlanMappingDot1qTunnelIfIndex
                InterfaceIndex,
            esVlanMappingDot1qTunnelMinVID
                VlanId,
            esVlanMappingDot1qTunnelMaxVID
                VlanId,
            esVlanMappingDot1qTunnelNewVID
                VlanId,
            esVlanMappingDot1qTunnelPriority
                Integer32,
            esVlanMappingDot1qTunnelRuleStatus
                INTEGER,
            esVlanMappingDot1qTunnelRowStatus
                RowStatus
         }

    esVlanMappingDot1qTunnelIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object indicates the module's interface number."
        ::= { esVlanMappingDot1qTunnelEntry 1 }


    esVlanMappingDot1qTunnelMinVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object indicates the start VID of the original VLAN range."
        ::= { esVlanMappingDot1qTunnelEntry 2 }


    esVlanMappingDot1qTunnelMaxVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object indicates the end VID of the original VLAN range.
            If the MinVID is equal to the MaxVID, it means the specified
            orignal VLAN is a single VLAN."
        ::= { esVlanMappingDot1qTunnelEntry 3 }


    esVlanMappingDot1qTunnelNewVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object indicates the service VLAN ID that will be added
            for matched packets on VLAN dot1q-tunnel port."
        ::= { esVlanMappingDot1qTunnelEntry 4 }


    esVlanMappingDot1qTunnelPriority OBJECT-TYPE
        SYNTAX Integer32 (0..7)
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object specifies the priority for the entry. If not
            specified, the priority of the service VLAN tag will be set to 0."
        DEFVAL { 0 }
        ::= { esVlanMappingDot1qTunnelEntry 5 }


    esVlanMappingDot1qTunnelRuleStatus OBJECT-TYPE
        SYNTAX INTEGER
            {
            active(1),
            inactive(2)
            }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The 'active' status indicates this vlan mapping add entry is effective
            on current port mode."
        ::= { esVlanMappingDot1qTunnelEntry 6 }


    esVlanMappingDot1qTunnelRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { esVlanMappingDot1qTunnelEntry 99 }


    esVlanMappingProfileTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EsVlanMappingProfileEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table is used to create a VLAN mapping profile to assign service VLAN ID.
            Multiple rules can be specified for a VLAN mapping profile."
        ::= { esVlanTunnelMIBObjects 6 }


    esVlanMappingProfileEntry OBJECT-TYPE
        SYNTAX EsVlanMappingProfileEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list containing VLAN mapping profile information."
        INDEX { esVlanMappingProfileID, esVlanMappingProfileType }
        ::= { esVlanMappingProfileTable 1 }


    EsVlanMappingProfileEntry ::=
        SEQUENCE {
            esVlanMappingProfileID
                Integer32,
            esVlanMappingProfileType
                INTEGER,
            esVlanMappingProfileRowStatus
                RowStatus
         }

    esVlanMappingProfileID OBJECT-TYPE
        SYNTAX Integer32 (1..1000)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Specifies the VLAN mapping profile ID."
        ::= { esVlanMappingProfileEntry 1 }


    esVlanMappingProfileType OBJECT-TYPE
        SYNTAX INTEGER
            {
            ethernet(1),
            ip(2),
            ipv6(3),
            ethernetIp(4)
            }
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Specifies the VLAN mapping profile type.
            ethernet(1)- The profile can match L2 fields.
            ip(2)      - The profile can match L3 IP fields.
            ipv6(3)    - The profile can match IPv6 destination or source address.
            ethernetIp(4) - The profile can match L2 and L3 IP fields."
        ::= { esVlanMappingProfileEntry 2 }


    esVlanMappingProfileRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { esVlanMappingProfileEntry 99 }


    esVlanMappingProfileRuleTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EsVlanMappingProfileRuleEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This table contains VLAN mapping profile rule information.
            These rules will indicate whether to add a tag or to replace
            the original C-VLAN in the tag for the matched packets.

            For VLAN mapping profile rules in the same profile, the rule's
            priority is decided by the rule's ID; a smaller ID has a higher priority."
        ::= { esVlanTunnelMIBObjects 7 }


    esVlanMappingProfileRuleEntry OBJECT-TYPE
        SYNTAX EsVlanMappingProfileRuleEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of information about VLAN Mapping profile rules."
        INDEX { esVlanMappingProfileRuleProfileID, esVlanMappingProfileRuleSn }
        ::= { esVlanMappingProfileRuleTable 1 }


    EsVlanMappingProfileRuleEntry ::=
        SEQUENCE {
            esVlanMappingProfileRuleProfileID
                Integer32,
            esVlanMappingProfileRuleSn
                Integer32,
            esVlanMappingProfileRuleSrcMacAddr
                MacAddress,
            esVlanMappingProfileRuleDstMacAddr
                MacAddress,
            esVlanMappingProfileRulePriority
                Integer32,
            esVlanMappingProfileRuleInnerVid
                VlanIdOrNone,
            esVlanMappingProfileRuleEtherType
                OCTET STRING,
            esVlanMappingProfileRuleSrcIP
                InetAddressIPv4,
            esVlanMappingProfileRuleSrcIPMask
                InetAddressIPv4,
            esVlanMappingProfileRuleDstIP
                InetAddressIPv4,
            esVlanMappingProfileRuleDstIPMask
                InetAddressIPv4,
            esVlanMappingProfileRuleSrcIPV6
                InetAddressIPv6,
            esVlanMappingProfileRuleSrcV6PreLen
                InetAddressPrefixLength,
            esVlanMappingProfileRuleDstIPV6
                InetAddressIPv6,
            esVlanMappingProfileRuleDstV6PreLen
                InetAddressPrefixLength,
            esVlanMappingProfileRuleDscp
                Integer32,
            esVlanMappingProfileRuleSrcPort
                Integer32,
            esVlanMappingProfileRuleDstPort
                Integer32,
            esVlanMappingProfileRuleIpProtocol
                Integer32,
            esVlanMappingProfileRuleOperation
                INTEGER,
            esVlanMappingProfileRuleNewSVID
                VlanId,
            esVlanMappingProfileRuleNewPriority
                Integer32,
            esVlanMappingProfileRuleNewInnerVID
                VlanIdOrNone,
            esVlanMappingProfileRuleRowStatus
                RowStatus
         }

    esVlanMappingProfileRuleProfileID OBJECT-TYPE
        SYNTAX Integer32 (1..1000)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Specifies the profile ID."
        ::= { esVlanMappingProfileRuleEntry 1 }


    esVlanMappingProfileRuleSn OBJECT-TYPE
        SYNTAX Integer32 (0..10000)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Specifies the sequence number of this VLAN mapping profile rule.
            The special value of 0 means the sequence number will be automatically
            determined by the agent, and the SN begins from 10 and the increment is 10."
        ::= { esVlanMappingProfileRuleEntry 2 }


    esVlanMappingProfileRuleSrcMacAddr OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the source MAC address as a matching field.
            The special value of zero MAC means no MAC to be specified."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 3 }


    esVlanMappingProfileRuleDstMacAddr OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the destination MAC address as a matching field.
            The special value of zero MAC means no MAC to be specified."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 4 }


    esVlanMappingProfileRulePriority OBJECT-TYPE
        SYNTAX Integer32 (-1 | 0..7)
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the packet's 802.1p priority as a matching field.
            -1 means no priority to be specified."
        DEFVAL { -1 }
        ::= { esVlanMappingProfileRuleEntry 5 }


    esVlanMappingProfileRuleInnerVid OBJECT-TYPE
        SYNTAX VlanIdOrNone
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the packet's inner VID as a matching field.
            None means no inner VID is specified."
        DEFVAL { 0 }
        ::= { esVlanMappingProfileRuleEntry 6 }


    esVlanMappingProfileRuleEtherType OBJECT-TYPE
        SYNTAX OCTET STRING (SIZE (2))
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the EtherType of the packet as a matching field.
            The zero vlaue indicates that no EtherType is specified."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 7 }


    esVlanMappingProfileRuleSrcIP OBJECT-TYPE
        SYNTAX InetAddressIPv4
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies an IPv4 source address as a matching field.
            The zero IP indicates that no IP address is specified."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 8 }


    esVlanMappingProfileRuleSrcIPMask OBJECT-TYPE
        SYNTAX InetAddressIPv4
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the IPv4 source address mask."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 9 }


    esVlanMappingProfileRuleDstIP OBJECT-TYPE
        SYNTAX InetAddressIPv4
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies an IPv4 destination address as a matching field.
            The zero IP indicates that no IP address is specified."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 10 }


    esVlanMappingProfileRuleDstIPMask OBJECT-TYPE
        SYNTAX InetAddressIPv4
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the IPv4 destination address mask."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 11 }


    esVlanMappingProfileRuleSrcIPV6 OBJECT-TYPE
        SYNTAX InetAddressIPv6
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies an IPv6 source address as a matching field.
            The zero IP indicates that no IP address is specified."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 12 }


    esVlanMappingProfileRuleSrcV6PreLen OBJECT-TYPE
        SYNTAX InetAddressPrefixLength
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the length in bits of destination IPv6 address will be
            matched. In other words, the value of 0 indicates any source
            IPv6 address is specified. When the value of 128 indicates
            host IPv6 source address is specified."
        DEFVAL { 0 }
        ::= { esVlanMappingProfileRuleEntry 13 }


    esVlanMappingProfileRuleDstIPV6 OBJECT-TYPE
        SYNTAX InetAddressIPv6
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies an IPv6 destination address as a matching field.
            The zero IP indicates that no IP address is specified."
        DEFVAL { '00'h }
        ::= { esVlanMappingProfileRuleEntry 14 }


    esVlanMappingProfileRuleDstV6PreLen OBJECT-TYPE
        SYNTAX InetAddressPrefixLength
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the length in bits of destination IPv6 address will be
            matched. In other words, the value of 0 indicates any source
            IPv6 address is specified. When the value of 128 indicates
            host IPv6 source address is specified."
        DEFVAL { 0 }
        ::= { esVlanMappingProfileRuleEntry 15 }


    esVlanMappingProfileRuleDscp OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the DSCP parameter as a matching field.
            -1 means no DSCP to be specified."
        DEFVAL { -1 }
        ::= { esVlanMappingProfileRuleEntry 16 }


    esVlanMappingProfileRuleSrcPort OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the source port number as a matching field.
            -1 means no source port to be specified."
        DEFVAL { -1 }
        ::= { esVlanMappingProfileRuleEntry 17 }


    esVlanMappingProfileRuleDstPort OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the destination port number as a matching field.
            -1 means no destination port to be specified."
        DEFVAL { -1 }
        ::= { esVlanMappingProfileRuleEntry 18 }


    esVlanMappingProfileRuleIpProtocol OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the IP protocol as a matching field.
            -1 means no protocol to be specified."
        DEFVAL { -1 }
        ::= { esVlanMappingProfileRuleEntry 19 }


    esVlanMappingProfileRuleOperation OBJECT-TYPE
        SYNTAX INTEGER
            {
            dot1qTunnel(1),
            translate(2)
            }
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "dot1qTunnel(1) - indicates the Specified outer-VID will be added
            for matched packets.
            translate(2)   - indicates the Specified outer-VID will replace
            the outer-VID of the matched packets."
        ::= { esVlanMappingProfileRuleEntry 20 }


    esVlanMappingProfileRuleNewSVID OBJECT-TYPE
        SYNTAX VlanId
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the New outer-VID."
        ::= { esVlanMappingProfileRuleEntry 21 }


    esVlanMappingProfileRuleNewPriority OBJECT-TYPE
        SYNTAX Integer32 (0..7)
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the 802.1p priority in the new outer TAG.
            0 means no priority to be specified.
            If no specified, the priority in the new outer VLAN tag will be set to 0."
        DEFVAL { 0 }
        ::= { esVlanMappingProfileRuleEntry 22 }


    esVlanMappingProfileRuleNewInnerVID OBJECT-TYPE
        SYNTAX VlanIdOrNone
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "Specifies the new inner VID to be added to the matched packet.
            None means no new inner VID to be specified."
        DEFVAL { 0 }
        ::= { esVlanMappingProfileRuleEntry 23 }


    esVlanMappingProfileRuleRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { esVlanMappingProfileRuleEntry 99 }


    esVlanMappingPortProfileTable OBJECT-TYPE
        SYNTAX SEQUENCE OF EsVlanMappingPortProfileEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table that is used to configure interfaces' VLAN mapping
            rules of profile."
        ::= { esVlanTunnelMIBObjects 8 }


    esVlanMappingPortProfileEntry OBJECT-TYPE
        SYNTAX EsVlanMappingPortProfileEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of VLAN mapping rules of profiles for each interface."
        INDEX { esVlanMappingPortProfileIfIndex, esVlanMappingPortProfileId }
        ::= { esVlanMappingPortProfileTable 1 }


    EsVlanMappingPortProfileEntry ::=
        SEQUENCE {
            esVlanMappingPortProfileIfIndex
                InterfaceIndex,
            esVlanMappingPortProfileId
                Integer32,
            esVlanMappingPortProfileRowStatus
                RowStatus
         }

    esVlanMappingPortProfileIfIndex OBJECT-TYPE
        SYNTAX InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object indicates the module's interface number."
        ::= { esVlanMappingPortProfileEntry 1 }


    esVlanMappingPortProfileId OBJECT-TYPE
        SYNTAX Integer32 (1..1000)
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "This object indicates the VLAN mapping profile ID."
        ::= { esVlanMappingPortProfileEntry 2 }


    esVlanMappingPortProfileRowStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { esVlanMappingPortProfileEntry 99 }


    esVlanTunnelMIBConformance   OBJECT IDENTIFIER ::= { dlinkEsVlanTunnelMIB 2 }
    esVlanTunnelCompliances      OBJECT IDENTIFIER ::= { esVlanTunnelMIBConformance 1 }


    esVlanTunnelCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
            "The compliance statement for entities which implement the
            DLINKES-VLAN-TUNNEL-MIB."
        MODULE -- this module
            MANDATORY-GROUPS { esVlanTunnelBasicGroup, esVlanMappingGroup }
            GROUP esVlanMappingProfileGroup
                DESCRIPTION
                    "This group is required only if the VLAN mapping profile feature
                    is implemented by the agent."
        ::= { esVlanTunnelCompliances 1 }


    esVlanTunnelGroups OBJECT IDENTIFIER ::= { esVlanTunnelMIBConformance 2 }


    esVlanTunnelBasicGroup OBJECT-GROUP
        OBJECTS { esVlanTunnelInnerEtherType, esVlanTunnelEtherType, esVlanMappingMissDropEnabled, esVlanTunnelTrustInnerPriEnabled, esVlanTunnelInsertDot1qTag
             }
        STATUS current
        DESCRIPTION
            "A collection of objects providing Basic VLAN Tunnel configuration."
        ::= { esVlanTunnelGroups 1 }


    esVlanMappingGroup OBJECT-GROUP
        OBJECTS { esVlanMappingTranslateNewVlan, esVlanMappingTranslateNewInnerVlan, esVlanMappingTranslatePriority, esVlanMappingTranslateRuleStatus, esVlanMappingTranslateRowStatus,
            esVlanMappingDot1qTunnelNewVID, esVlanMappingDot1qTunnelPriority, esVlanMappingDot1qTunnelRuleStatus, esVlanMappingDot1qTunnelRowStatus }
        STATUS current
        DESCRIPTION
            "A collection of objects providing VLAN Mapping and VLAN
            Translation configuration."
        ::= { esVlanTunnelGroups 2 }


    esVlanMappingProfileGroup OBJECT-GROUP
        OBJECTS { esVlanMappingPortProfileRowStatus, esVlanMappingProfileRowStatus, esVlanMappingProfileRuleSrcMacAddr,
            esVlanMappingProfileRuleDstMacAddr, esVlanMappingProfileRulePriority, esVlanMappingProfileRuleInnerVid, esVlanMappingProfileRuleEtherType, esVlanMappingProfileRuleSrcIP,
            esVlanMappingProfileRuleSrcIPMask, esVlanMappingProfileRuleDstIP, esVlanMappingProfileRuleDstIPMask, esVlanMappingProfileRuleSrcIPV6, esVlanMappingProfileRuleSrcV6PreLen,
            esVlanMappingProfileRuleDstIPV6, esVlanMappingProfileRuleDstV6PreLen, esVlanMappingProfileRuleDscp, esVlanMappingProfileRuleSrcPort, esVlanMappingProfileRuleDstPort,
            esVlanMappingProfileRuleIpProtocol, esVlanMappingProfileRuleOperation, esVlanMappingProfileRuleNewSVID, esVlanMappingProfileRuleNewPriority, esVlanMappingProfileRuleNewInnerVID,
            esVlanMappingProfileRuleRowStatus }
        STATUS current
        DESCRIPTION
            "A collection of objects providing VLAN Mapping Profile configuration."
        ::= { esVlanTunnelGroups 3 }



END

--
-- DLINKES-VLAN-TUNNEL-MIB 20130506.mib
--