-- *****************************************************************
-- DLINKSW-OSPFV2-MIB.mib : D-Link OSPF MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--   
-- *****************************************************************


DLINKSW-OSPFV2-MIB DEFINITIONS ::= BEGIN

	IMPORTS
        MODULE-IDENTITY,OBJECT-TYPE,
        Integer32,Unsigned32,IpAddress            	FROM SNMPv2-SMI
        TruthValue,DisplayString, 
        RowStatus   								FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP				FROM SNMPv2-CONF
        InterfaceIndex                      		FROM IF-MIB
        dlinkIndustrialCommon               		FROM DLINK-ID-REC-MIB;

	dlinkSwOspfv2MIB MODULE-IDENTITY
        LAST-UPDATED "201707130000Z"
        ORGANIZATION    "D-Link Corp."
        CONTACT-INFO
            "        D-Link Corporation

             Postal: No. 289, Sinhu 3rd Rd., Neihu District,
                     Taipei City 114, Taiwan, R.O.C
             Tel:     +886-2-66000123
             E-mail: tsd@dlink.com.tw
            "
        DESCRIPTION
                "The Structure of OSPFv2 Information for the
                 proprietary enterprise."

        REVISION        "201705130000Z"
        DESCRIPTION
            "Add new object dOspfv2MaxPathsNum and table dOspfv2DistanceTable
            to support multiple ospf process."

        REVISION        "201705100000Z"
        DESCRIPTION
            "Add new objects dOspfv2ReferenceBandwidth."

        REVISION        "201512220000Z"
            DESCRIPTION
                "Correct typo."

        REVISION        "201510150000Z"
            DESCRIPTION
                "Add new object dOspfv2IfBfdState."

        REVISION        "201509060000Z"
        DESCRIPTION
            "Add new objects dOspfv2GRRestartHelperMode,dOspfv2GRRestartHelperMaxGracePeriod and
            dOspfv2CompatibleRfc3509."

        REVISION        "201507210000Z"
            DESCRIPTION
                "Add new object dOspfv2LogAdjacencyChanges."

        REVISION        "201503160000Z"
            DESCRIPTION
                "Add a new 'isis' value for object dOspfv2RedistProtocol."

        REVISION        "201408270000Z"
            DESCRIPTION
                "Update RowStatus objects. Remove some objects."

        REVISION        "201311050000Z"
        DESCRIPTION
            "Modify the access of objects dOspfv2PassiveIfDefault, dOspfv2VLinkState"

        REVISION        "201308290000Z"
        DESCRIPTION
            "Initial revision of this MIB module."

		::= { dlinkIndustrialCommon 122 }
    
	dOspfv2MIBObjects			OBJECT IDENTIFIER ::= { dlinkSwOspfv2MIB 1 }
    dOspfv2MIBConformance		OBJECT IDENTIFIER ::= { dlinkSwOspfv2MIB 2 }


	dOspfv2GlobalCtrl          OBJECT IDENTIFIER ::= { dOspfv2MIBObjects 1 }

	dOspfv2DefMetric OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Specify the default metric value for the redistributed routes."
		::= { dOspfv2GlobalCtrl 1 }

	dOspfv2PassiveIfDefault OBJECT-TYPE
        SYNTAX          TruthValue
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
           "This object indicates the default passive state for the interfaces 
           on which the passive state is not explicitly configured.
           When this object is true(1), the default passive state is enabled.  
           When false(2), the default passive state is disabled."
		::= { dOspfv2GlobalCtrl 2 }
    
	dOspfv2DefInfoOriginState OBJECT-TYPE
        SYNTAX 		TruthValue
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Specify to enable or disable defualt information originate function."
		::= { dOspfv2GlobalCtrl 3 }

	dOspfv2DefInfoOriginAlways OBJECT-TYPE
        SYNTAX 		TruthValue
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Always generate the default route regardless of existence of a 
            default route in the redistricted routes."
		::= { dOspfv2GlobalCtrl 4 }

	dOspfv2DefInfoOriginMetric OBJECT-TYPE
        SYNTAX Integer32 (0..16777214)
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Always generate the default route regardless of existence of a 
            default route in the redistricted routes."
		::= { dOspfv2GlobalCtrl 5 }

	dOspfv2LogAdjacencyChanges OBJECT-TYPE
	SYNTAX INTEGER {
		disabled(1),
		enabled(2),
		detail(3)
		}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Records OSPF neighbors going up or down."
		::= { dOspfv2GlobalCtrl 6 }

	dOspfv2GRRestartHelperMode OBJECT-TYPE
	SYNTAX INTEGER {
		unspecific(1),
		never(2),
		only-reload(3),
		only-upgrade(4)
		}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Graceful Restart local policy as helper mode."
		::= { dOspfv2GlobalCtrl 7 }

	dOspfv2GRRestartHelperMaxGracePeriod OBJECT-TYPE
	SYNTAX Integer32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Graceful Restart maximum grace period in seconds accepted by helper."
		::= { dOspfv2GlobalCtrl 8 }

	dOspfv2CompatibleRfc3509 OBJECT-TYPE
	SYNTAX 		TruthValue
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Implement ABR behaviors as defined in RFC3509."
		::= { dOspfv2GlobalCtrl 9 }

    	dOspfv2ReferenceBandwidth OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "Reference bandwidth in megabits per second (MBPS) for
            calculating default interface metrics."
		::= { dOspfv2GlobalCtrl 10 }

	dOspfv2MaxPathsNum OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "the maximum number of parallel routes to the same destination network 
           learned from the protocol that can be installed in the routing table simultaneously"
		::= { dOspfv2GlobalCtrl 11 }

	dOspfv2CompatibleRFC1583 OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "Used to configure the method for choosing among multiple
           AS external routes advertising the same destination whether
           backward compatible to RFC1583."
        DEFVAL { false }
		::= { dOspfv2GlobalCtrl 12 }



	dOspfv2StubAreaTable OBJECT-TYPE
	    SYNTAX       SEQUENCE OF DOspfv2StubAreaEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "Opertaions table of OSPFv2 stub areas."
	    ::= { dOspfv2MIBObjects 2 }

	dOspfv2StubAreaEntry OBJECT-TYPE
	    SYNTAX       DOspfv2StubAreaEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "An entry in the dOspfv2StubAreaTable containing the operational
	         characteristics of OSPFv2 stub areas."
	    INDEX    { dOspfv2StubAreaId }
	    ::= { dOspfv2StubAreaTable 1 }

	DOspfv2StubAreaEntry ::=	    SEQUENCE {
	    	dOspfv2StubAreaId				IpAddress,	
	    	dOspfv2StubAreaSummary			TruthValue,
	    	dOspfv2StubAreaDefCost			Integer32,
			dOspfv2StubAreaRowStatus		RowStatus
	}

	dOspfv2StubAreaId OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "The stub area's ID."
		::= { dOspfv2StubAreaEntry 1 }

	dOspfv2StubAreaSummary OBJECT-TYPE
        SYNTAX 		TruthValue
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify to import the summary LSA or not."
		::= { dOspfv2StubAreaEntry 2 }

	dOspfv2StubAreaDefCost OBJECT-TYPE
        SYNTAX Integer32 (0..16777215)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify the cost associated with the type 3 default route 
           that will be automatically injected to the stub area."
		::= { dOspfv2StubAreaEntry 3 }

	dOspfv2StubAreaRowStatus OBJECT-TYPE
     	SYNTAX       RowStatus
     	MAX-ACCESS   read-create
     	STATUS       current
     	DESCRIPTION
            "This object indicates the status of this entry.
            Only createAndGo(4) and destroy(6) can be set."
     	::= { dOspfv2StubAreaEntry 99 }

	dOspfv2NssaAreaTable OBJECT-TYPE
	    SYNTAX       SEQUENCE OF DOspfv2NssaAreaEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "Opertaions table of OSPFv2 stub areas."
	    ::= { dOspfv2MIBObjects 3 }

	dOspfv2NssaAreaEntry OBJECT-TYPE
	    SYNTAX       DOspfv2NssaAreaEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "An entry in the dOspfv2NssaAreaTable containing the operational
	         characteristics of OSPFv2 stub areas."
	    INDEX    { dOspfv2NssaAreaId }
	    ::= { dOspfv2NssaAreaTable 1 }

	DOspfv2NssaAreaEntry ::=	    SEQUENCE {
	    	dOspfv2NssaAreaId				IpAddress,	
	    	dOspfv2NssaAreaSummary			TruthValue,
	    	dOspfv2NssaAreaDefCost			Integer32,
			dOspfv2NssaAreaRowStatus		RowStatus
	}

	dOspfv2NssaAreaId OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "The stub area's ID."
		::= { dOspfv2NssaAreaEntry 1 }

	dOspfv2NssaAreaSummary OBJECT-TYPE
        SYNTAX 		TruthValue
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify to import the summary LSA or not."
		::= { dOspfv2NssaAreaEntry 2 }

	dOspfv2NssaAreaDefCost OBJECT-TYPE
        SYNTAX Integer32 (0..16777215)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify the cost associated with the default route 
           that will be automatically injected to the stub area."
		::= { dOspfv2NssaAreaEntry 3 }

	dOspfv2NssaAreaRowStatus OBJECT-TYPE
     	SYNTAX       RowStatus
     	MAX-ACCESS   read-create
     	STATUS       current
     	DESCRIPTION
            "This object indicates the status of this entry.
            Only createAndGo(4) and destroy(6) can be set."
     	::= { dOspfv2NssaAreaEntry 99 }

	dOspfv2AreaRangeTable OBJECT-TYPE
	    SYNTAX       SEQUENCE OF DOspfv2AreaRangeEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "Opertaions table of OSPFv2 area ranges."
	    ::= { dOspfv2MIBObjects 4 }

	dOspfv2AreaRangeEntry OBJECT-TYPE
	    SYNTAX       DOspfv2AreaRangeEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "An entry in the dOspfv2AreaRangeTable containing the operational
	         characteristics of OSPFv2 area ranges."
	    INDEX    { dOspfv2AreaRangeAreaId,dOspfv2AreaRangeAreaNet,dOspfv2AreaRangeAreaMask }
	    ::= { dOspfv2AreaRangeTable 1 }

	DOspfv2AreaRangeEntry ::=	    SEQUENCE {
	    	dOspfv2AreaRangeAreaId			IpAddress,	
	    	dOspfv2AreaRangeAreaNet			IpAddress,
	    	dOspfv2AreaRangeAreaMask		IpAddress,
	    	dOspfv2AreaRangeEffect			INTEGER,
			dOspfv2AreaRangeRowStatus		RowStatus
	}

	dOspfv2AreaRangeAreaId OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Specify the area from which the routes will be summarized."
		::= { dOspfv2AreaRangeEntry 1 }


	dOspfv2AreaRangeAreaNet OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Specify the network address of the summary route."
		::= { dOspfv2AreaRangeEntry 2 }

	dOspfv2AreaRangeAreaMask OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Specify the network mask of the summary route."
		::= { dOspfv2AreaRangeEntry 3 }

	dOspfv2AreaRangeEffect OBJECT-TYPE
        SYNTAX INTEGER {
               advertise(1),
               not-advertise(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify wether to advertise a Type 3 summary LSA for 
           the specified range of addresses."
		::= { dOspfv2AreaRangeEntry 4 }

	dOspfv2AreaRangeRowStatus OBJECT-TYPE
     	SYNTAX       RowStatus
     	MAX-ACCESS   read-create
     	STATUS       current
     	DESCRIPTION
            "This object indicates the status of this entry.
            Only createAndGo(4) and destroy(6) can be set."
     	::= { dOspfv2AreaRangeEntry 99 }


	dOspfv2NetworkTable OBJECT-TYPE
	    SYNTAX          SEQUENCE OF DOspfv2NetworkEntry
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	        "This table provides a mechanism to specify a network as one that runs
            OSPFv2."
	    ::= { dOspfv2MIBObjects 5 }
	
	dOspfv2NetworkEntry OBJECT-TYPE
	    SYNTAX          DOspfv2NetworkEntry
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	        "An entry in the dOspfv2NetworkTable containing the operational
	        characteristics of OSPFv2 network."
	    INDEX    { 
            dOspfv2NetworkPrefix, 
            dOspfv2NetworkMask 
        }
	    ::= { dOspfv2NetworkTable 1 }

	DOspfv2NetworkEntry ::= 	    SEQUENCE {
	    dOspfv2NetworkPrefix    	    IpAddress,	
	    dOspfv2NetworkMask	    	    IpAddress,	
	    dOspfv2NetworkAreaId	    	IpAddress,
		dOspfv2NetworkRowStatus			RowStatus
	}

	dOspfv2NetworkPrefix OBJECT-TYPE
	    SYNTAX          IpAddress
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	        "This object indicates the subnet prefix of the network."
	    ::= { dOspfv2NetworkEntry 1 }

	dOspfv2NetworkMask OBJECT-TYPE
	    SYNTAX          IpAddress
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	        "This object indicates the mask of the network."
	    ::= { dOspfv2NetworkEntry 2 }

	dOspfv2NetworkAreaId OBJECT-TYPE
	    SYNTAX          IpAddress
	    MAX-ACCESS      read-create
	    STATUS          current
	    DESCRIPTION
	        "Specify the identifier of the area to be created."
	    ::= { dOspfv2NetworkEntry 3 }

	dOspfv2NetworkRowStatus OBJECT-TYPE
     	SYNTAX          RowStatus
     	MAX-ACCESS      read-create
     	STATUS          current
     	DESCRIPTION
         "This object indicates the status of this entry.
            Only createAndGo(4) and destroy(6) can be set."
     ::= { dOspfv2NetworkEntry 99 }

	dOspfv2IfTable OBJECT-TYPE
	    SYNTAX       SEQUENCE OF DOspfv2IfEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "Opertaions table of OSPFv2 interface."
	    ::= { dOspfv2MIBObjects 6 }

	dOspfv2IfEntry OBJECT-TYPE
	    SYNTAX       DOspfv2IfEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "An entry in the dOspfv2IfTable containing the operational
	         characteristics of OSPFv2 interface."
	    INDEX    { dOspfv2IfIndex }
	    ::= { dOspfv2IfTable 1 }

	DOspfv2IfEntry ::=	    SEQUENCE {
	    	dOspfv2IfIndex	    	        InterfaceIndex,
            dOspfv2IfAddress				IpAddress,
            dOspfv2IfMask					IpAddress,
	    	dOspfv2IfAreaId					IpAddress,	
	    	dOspfv2IfType					INTEGER,
            dOspfv2IfMetric					Integer32,
            dOspfv2IfDeadInterval			Integer32,
            dOspfv2IfHelloInterval			Integer32,
            dOspfv2IfRetransInterval		Integer32,
            dOspfv2IfTransitDelay			Integer32,
            dOspfv2IfPriority				Integer32,
            dOspfv2IfAuthType			 	INTEGER,
            dOspfv2IfAuthKey			 	DisplayString,
            dOspfv2IfAuthKeyId			 	Integer32,
            dOspfv2IfState			 		INTEGER,
            dOspfv2IfPassiveMode            INTEGER,
            dOspfv2IfDR			 			IpAddress,
            dOspfv2IfBDR			 		IpAddress,
            dOspfv2IfBfdState				INTEGER
	}

	dOspfv2IfIndex OBJECT-TYPE
	    SYNTAX          InterfaceIndex
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	        "The ifIndex value of the OSPFv2 interface."
	    ::= { dOspfv2IfEntry 1 }

	dOspfv2IfAddress OBJECT-TYPE
	    SYNTAX          IpAddress
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "Network address of OSPFv2 interface."
	    ::= { dOspfv2IfEntry 2 }

	dOspfv2IfMask OBJECT-TYPE
	    SYNTAX          IpAddress
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "Network mask of OSPFv2 interface."
	    ::= { dOspfv2IfEntry 3 }

	dOspfv2IfAreaId OBJECT-TYPE
	    SYNTAX          IpAddress
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "The area that the OSPFv2 interface is attached to."
	    ::= { dOspfv2IfEntry 4 }

	dOspfv2IfType OBJECT-TYPE
	    SYNTAX          INTEGER {
                        broadcast(1),
                        ponintToPoint(2)
                        }
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "The network type of the OSPFv2 interface."
	    ::= { dOspfv2IfEntry 5 }

	dOspfv2IfMetric OBJECT-TYPE
	    SYNTAX          Integer32 (1..65535)
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "The cost of the OSPFv2 interface."
	    ::= { dOspfv2IfEntry 6 }

	dOspfv2IfDeadInterval OBJECT-TYPE
	    SYNTAX          Integer32 (1..65535)
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "The interval during which at least one hello packet form a 
             neighbor must be received before it is declared dead."
	    ::= { dOspfv2IfEntry 7 }

	dOspfv2IfHelloInterval OBJECT-TYPE
	    SYNTAX          Integer32 (1..65535)
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "The interval between hello packets."
	    ::= { dOspfv2IfEntry 8 }

	dOspfv2IfRetransInterval OBJECT-TYPE
	    SYNTAX          Integer32 (1..65535)
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "The time for retransmission of LSA
             to adjacencies belonging to the interface."
	    ::= { dOspfv2IfEntry 9 }

	dOspfv2IfTransitDelay OBJECT-TYPE
	    SYNTAX          Integer32 (1..65535)
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "The estimated delay of time the router takes to 
             transmit a LSA packet on the interface."
	    ::= { dOspfv2IfEntry 10 }

	dOspfv2IfPriority OBJECT-TYPE
	    SYNTAX          Integer32 (0..255)
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "The router priority that is used to determine 
             the designated router for the network."
	    ::= { dOspfv2IfEntry 11 }

	dOspfv2IfAuthType OBJECT-TYPE
	    SYNTAX          INTEGER {
                        none(0),
                        simplePassword(1),
                        md5(2)
                        }
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "Specify the type of authentication used on the interface."
	    ::= { dOspfv2IfEntry 12 }

	dOspfv2IfAuthKey OBJECT-TYPE
	    SYNTAX          DisplayString (SIZE(0..16))
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "Specify the authentication password. It is a simple password when the 
             dOspfv2IfAuthType is simplePassword(1) and a MD5 key when the 
             dOspfv2IfAuthType is md5(2)."
	    ::= { dOspfv2IfEntry 13 }

	dOspfv2IfAuthKeyId OBJECT-TYPE
	    SYNTAX          Integer32 (1..255)
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "Specify the MD5 key ID."
	    ::= { dOspfv2IfEntry 14 }

	dOspfv2IfState OBJECT-TYPE
	    SYNTAX          INTEGER {
                        down(1),
                        loopback(2),
                        waiting(3),
                        pointToPoint(4),
                        designatedRouter(5),
                        backupDesignatedRouter(6),
                        otherDesignatedRouter(7)
                        }
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "State of the OSPFv2 interface."
	    ::= { dOspfv2IfEntry 15 }

	dOspfv2IfPassiveMode OBJECT-TYPE   	    
	    SYNTAX          INTEGER  {
            followGlobal(0),
            disabled(1),
            enabled(2)
        }        
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "This object indicates the OSPF passive state on the interface.
            The value of 'followGlobal' indicates the passive state is not explicitly 
            specified on the interface, and global default passive state is followed.
            "
	    ::= { dOspfv2IfEntry 16 }

	dOspfv2IfDR OBJECT-TYPE
	    SYNTAX          IpAddress
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "The IP address of the Designated Router."
	    ::= { dOspfv2IfEntry 17 }

	dOspfv2IfBDR OBJECT-TYPE
	    SYNTAX          IpAddress
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "The IP address of the Bakcup Designated Router."
	    ::= { dOspfv2IfEntry 18 }

	dOspfv2IfBfdState OBJECT-TYPE
	    SYNTAX INTEGER {
		disabled(1),
		enabled(2)
		}
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
		"Indicate the opertional state of BFD on this interface."
		::= { dOspfv2IfEntry 19 }

	dOspfv2VirtualLinkTable OBJECT-TYPE
	    SYNTAX       SEQUENCE OF DOspfv2VirtualLinkEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "Opertaions table of OSPFv2 virtual links."
	    ::= { dOspfv2MIBObjects 7 }

	dOspfv2VirtualLinkEntry OBJECT-TYPE
	    SYNTAX       DOspfv2VirtualLinkEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "An entry in the dOspfv2VirtualLinkTable containing the operational
	         characteristics of OSPFv2 virtual links."
	    INDEX    { dOspfv2VLinkAreaId,dOspfv2VLinkNbrId }
	    ::= { dOspfv2VirtualLinkTable 1 }

	DOspfv2VirtualLinkEntry ::=	    SEQUENCE {
	    	dOspfv2VLinkAreaId				IpAddress,	
	    	dOspfv2VLinkNbrId				IpAddress,	
	    	dOspfv2VLinkDeadInterval		Integer32,
	    	dOspfv2VLinkHelloInterval		Integer32,
	    	dOspfv2VLinkTransitDelay		Integer32,
	    	dOspfv2VLinkRetransInterval		Integer32,
	    	dOspfv2VLinkAuthType			INTEGER,
	    	dOspfv2VLinkAuthKey				DisplayString,
	    	dOspfv2VLinkAuthKeyId			Integer32,
	    	dOspfv2VLinkState				INTEGER,
			dOspfv2VLinkRowStatus			RowStatus
	}

	dOspfv2VLinkAreaId OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Specify the identifier of the area to establish the virtual link."
		::= { dOspfv2VirtualLinkEntry 1 }

	dOspfv2VLinkNbrId OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Specify the Router ID of the virtual link neighbor."
		::= { dOspfv2VirtualLinkEntry 2 }

	dOspfv2VLinkDeadInterval OBJECT-TYPE
        SYNTAX Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify the interval in seconds that a neighbor is regarded 
            as off-line if no hello packets are received within that time."
		::= { dOspfv2VirtualLinkEntry 3 }

	dOspfv2VLinkHelloInterval OBJECT-TYPE
        SYNTAX Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify the interval in seconds that the router sends the hello packet on the virtual link."
		::= { dOspfv2VirtualLinkEntry 4 }

	dOspfv2VLinkTransitDelay OBJECT-TYPE
        SYNTAX Integer32 (1..65535)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Specify the estimated delay of time the router takes to transmit a LSA packet."
		::= { dOspfv2VirtualLinkEntry 5 }

	dOspfv2VLinkRetransInterval OBJECT-TYPE
        SYNTAX Integer32 (1..65535)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Specify time for retransmission of link-state advertisement (LSA) to the adjacency."
		::= { dOspfv2VirtualLinkEntry 6 }

	dOspfv2VLinkAuthType OBJECT-TYPE
        SYNTAX INTEGER {
               null(1),
               clear-text(2),
               md5(3)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specifies authentication type."
		::= { dOspfv2VirtualLinkEntry 7 }

	dOspfv2VLinkAuthKey OBJECT-TYPE
        SYNTAX DisplayString (SIZE(0..16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify up to 8 bytes long password used for password authentication or
            up to 16 bytes long MD digest key for MD5 message digest authentication."
		::= { dOspfv2VirtualLinkEntry 8 }

	dOspfv2VLinkAuthKeyId OBJECT-TYPE
        SYNTAX Integer32 (1..255)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
           "Specify the MD5 key ID."
		::= { dOspfv2VirtualLinkEntry 9 }

	dOspfv2VLinkState OBJECT-TYPE
        SYNTAX INTEGER {
               down(1),
               up(2)
               }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Indicate the opertional state of virtual link."
		::= { dOspfv2VirtualLinkEntry 10 }

	dOspfv2VLinkRowStatus OBJECT-TYPE
     	SYNTAX       RowStatus
     	MAX-ACCESS   read-create
     	STATUS       current
     	DESCRIPTION
            "This object indicates the status of this entry.
            Only createAndGo(4) and destroy(6) can be set."
     	::= { dOspfv2VirtualLinkEntry 99 }

	dOspfv2RedistributeTable OBJECT-TYPE
	    SYNTAX          SEQUENCE OF DOspfv2RedistributeEntry
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	        "This table provides mechanism to configure redistribute routes from
            other routing domain into OSPFv2."
	    ::= { dOspfv2MIBObjects 8 }
	
	dOspfv2RedistributeEntry OBJECT-TYPE
	    SYNTAX       DOspfv2RedistributeEntry
	    MAX-ACCESS   not-accessible
	    STATUS       current
	    DESCRIPTION
	        "An entry in the dOspfv2RedistributeTable containing the operational
	         characteristics of OSPFv2 redistribution."
	    INDEX    { dOspfv2RedistProtocol }
	    ::= { dOspfv2RedistributeTable 1 }

	DOspfv2RedistributeEntry ::=	    SEQUENCE {
	    dOspfv2RedistProtocol	    	    INTEGER,
	    dOspfv2RedistMetric	    	    	Unsigned32,	
	    dOspfv2RedistMetricType 	    	INTEGER,	
	    dOspfv2RedistRouteMap	    	    DisplayString,
		dOspfv2RedistRowStatus	            RowStatus
	}

	dOspfv2RedistProtocol OBJECT-TYPE
	    SYNTAX          INTEGER {
            connected(1),
            static(2),
            rip(3),
            bgp(4),
            isis(5)
        }
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	        "This object indicates the source routing protocol to be imported
            into OSPFv2."
	    ::= { dOspfv2RedistributeEntry 1 }

	dOspfv2RedistMetric OBJECT-TYPE
	    SYNTAX          Unsigned32 (0..16777214)
	    MAX-ACCESS      read-create
	    STATUS          current
	    DESCRIPTION
	        "Specifies the value to be used as metric for the redistributed routes."
	    ::= { dOspfv2RedistributeEntry 2 }

	dOspfv2RedistMetricType OBJECT-TYPE
	    SYNTAX       INTEGER {
               external1(1),
               external2(2)
        }
	    MAX-ACCESS   read-create
	    STATUS       current
	    DESCRIPTION
	        "Specifies the external link type of the route being 
             redistributed into the OSPF routing domain."
	    ::= { dOspfv2RedistributeEntry 3 }

	dOspfv2RedistRouteMap OBJECT-TYPE
	    SYNTAX          DisplayString 
	    MAX-ACCESS      read-create
	    STATUS          current
	    DESCRIPTION
	        "This object indicates the name of the route map that is used
            to filter the routes to be redistributed to the OSPFv2. 
            A zero length string indiates that the route map is not specified and 
            all routes are redistributed."
	    ::= { dOspfv2RedistributeEntry 4 }


	dOspfv2RedistRowStatus OBJECT-TYPE
     	SYNTAX       RowStatus
     	MAX-ACCESS   read-create
     	STATUS       current
     	DESCRIPTION
         "This object indicates the status of this entry.
            Only createAndGo(4) and destroy(6) can be set."
     	::= { dOspfv2RedistributeEntry 99 }

	dOspfv2DistanceTable	OBJECT-TYPE
	    SYNTAX          SEQUENCE OF DOspfv2DistanceEntry
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	       "This table contains a list of administrative distance configuration."
	    ::= { dOspfv2MIBObjects 9 }

	dOspfv2DistanceEntry OBJECT-TYPE
	    SYNTAX          DOspfv2DistanceEntry
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION
	       "An entry contains the administrative distance configuration."
	    INDEX {  
	        dOspfv2DistanceType
	    }
	    ::= { dOspfv2DistanceTable 1 }
    
	DOspfv2DistanceEntry ::=         SEQUENCE {
	    dOspfv2DistanceType             INTEGER,
	    dOspfv2Distance                 Integer32      
	}

	dOspfv2DistanceType OBJECT-TYPE
	    SYNTAX		    INTEGER  {
	        intra(1),
	        inter(2),
	        extern1(3),
	        extern2(4)
	    }
	    MAX-ACCESS	    not-accessible
	    STATUS		    current
	    DESCRIPTION
	       "This object indicates the type of the distance."
	    ::= { dOspfv2DistanceEntry 1 }

	dOspfv2Distance OBJECT-TYPE
	    SYNTAX          Integer32
	    MAX-ACCESS      read-write
	    STATUS          current
	    DESCRIPTION
	        "This object indicates the administrative distance of the entry.
	        The default value depends on the protocol type:
	        Type        Distance
	        =========   ========
	        intra       80
	        inter       90
	        extern1     110
	        extern2     115
	            "
	    ::= { dOspfv2DistanceEntry 2 }
 
    -- Conformance Information        

    dOspfv2MIBGroups      OBJECT IDENTIFIER ::= { dOspfv2MIBConformance 1 }
    dOspfv2MIBCompliances OBJECT IDENTIFIER ::= { dOspfv2MIBConformance 2 }

    -- Compliance Statements

    dOspfv2MIBFullCompliance MODULE-COMPLIANCE
            STATUS          current
            DESCRIPTION     "The compliance statement"
            MODULE          -- this module
            MANDATORY-GROUPS {
                            dOspfv2GlobalCtrlGroup,
                            dOspfv2StubAreaGroup,
                            dOspfv2NssaAreaGroup,
                            dOspfv2AreaRangeGroup,
                            dOspfv2NetworkGroup,
                            dOspfv2IfGroup,
                            dOspfv2VirtualLinkGroup,
                            dOspfv2RedistributeGroup,
                            dOspfv2DistanceGroup
                            }			
             ::= { dOspfv2MIBCompliances 1 }

    -- units of conformance


    dOspfv2GlobalCtrlGroup OBJECT-GROUP
            OBJECTS         {
                            dOspfv2DefMetric,
                            dOspfv2PassiveIfDefault,
                            dOspfv2DefInfoOriginState,
                            dOspfv2DefInfoOriginAlways,
                            dOspfv2DefInfoOriginMetric,
                            dOspfv2LogAdjacencyChanges,
                            dOspfv2GRRestartHelperMode,
                            dOspfv2GRRestartHelperMaxGracePeriod,
                            dOspfv2CompatibleRfc3509,
                            dOspfv2ReferenceBandwidth,
                            dOspfv2MaxPathsNum,
                            dOspfv2CompatibleRFC1583
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring OSPF process configurations."
            ::= { dOspfv2MIBGroups 1 }

    dOspfv2StubAreaGroup OBJECT-GROUP
            OBJECTS         {
							dOspfv2StubAreaSummary,
                            dOspfv2StubAreaDefCost,
							dOspfv2StubAreaRowStatus
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring OSPFv2 stub areas."
            ::= { dOspfv2MIBGroups 2 }

    dOspfv2NssaAreaGroup OBJECT-GROUP
            OBJECTS         {
							dOspfv2NssaAreaSummary,
                            dOspfv2NssaAreaDefCost,
							dOspfv2NssaAreaRowStatus
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring OSPFv2 NSSA areas."
            ::= { dOspfv2MIBGroups 3 }

    dOspfv2AreaRangeGroup OBJECT-GROUP
            OBJECTS         {
							dOspfv2AreaRangeEffect,
							dOspfv2AreaRangeRowStatus
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring OSPFv2 area ranges."
            ::= { dOspfv2MIBGroups 4 }

    dOspfv2NetworkGroup OBJECT-GROUP
            OBJECTS         {
							dOspfv2NetworkAreaId,
							dOspfv2NetworkRowStatus
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring OSPFv2 networks."
            ::= { dOspfv2MIBGroups 5 }

    dOspfv2IfGroup OBJECT-GROUP
            OBJECTS         {
							dOspfv2IfAddress,
                            dOspfv2IfMask,
                            dOspfv2IfAreaId,
                            dOspfv2IfType,
                            dOspfv2IfMetric,
                            dOspfv2IfDeadInterval,
                            dOspfv2IfHelloInterval,
                            dOspfv2IfRetransInterval,
                            dOspfv2IfTransitDelay,
                            dOspfv2IfPriority,
                            dOspfv2IfAuthType,
                            dOspfv2IfAuthKey,
                            dOspfv2IfAuthKeyId,
                            dOspfv2IfState,
                            dOspfv2IfPassiveMode,
                            dOspfv2IfDR,
                            dOspfv2IfBDR,
                            dOspfv2IfBfdState
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring OSPFv2 interfaces."
            ::= { dOspfv2MIBGroups 6 }

    dOspfv2VirtualLinkGroup OBJECT-GROUP
            OBJECTS         {
							dOspfv2VLinkDeadInterval,
                            dOspfv2VLinkHelloInterval,
                            dOspfv2VLinkTransitDelay,
                            dOspfv2VLinkRetransInterval,
                            dOspfv2VLinkAuthType,
                            dOspfv2VLinkAuthKey,
                            dOspfv2VLinkAuthKeyId,
                            dOspfv2VLinkState,
							dOspfv2VLinkRowStatus
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring OSPFv2 virtual links."
            ::= { dOspfv2MIBGroups 7 }

    dOspfv2RedistributeGroup OBJECT-GROUP
            OBJECTS         {
							dOspfv2RedistMetric,
                            dOspfv2RedistMetricType,
                            dOspfv2RedistRouteMap,
							dOspfv2RedistRowStatus
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring
                 the redistribution of OSPFv2."
            ::= { dOspfv2MIBGroups 8 }

    dOspfv2DistanceGroup OBJECT-GROUP
            OBJECTS         {
                            dOspfv2Distance
                            }
            STATUS          current
            DESCRIPTION
                "These objects are used for managing/monitoring
                 the distance of OSPFv2."
            ::= { dOspfv2MIBGroups 9 }
END