2025-11-18
Download ARISTA-SWAG-HOST-RESOURCES-MIB.txt Open ARISTA-SWAG-HOST-RESOURCES-MIB.txt in a new tab
The MIB module for reporting SWAG system level information on Arista devices.
| Name | OID |
|---|---|
| aristaSwagHrSystemTable | 1.3.6.1.4.1.30065.3.41.1.1 |
| aristaSwagProcessorTable | 1.3.6.1.4.1.30065.3.41.1.2 |
| aristaSwagStorageTable | 1.3.6.1.4.1.30065.3.41.1.3 |
END OF TOC
1.3.6.1.4.1.30065.3.41.1.1
Index: aristaSwagHrSystemMemberId
This table contains system-level information, including system up time, date, number of users, information on processes, and memory size for all members in the SWAG that this device is a part of.
1.3.6.1.4.1.30065.3.41.1.1.1.1
SwagMemberIdA unique value, greater than zero, for each SWAG device. Note that SWAG members are currently limited to a smaller range. (1..256) · Integer32 · hint d
SWAG member ID this entry corresponds to.
1.3.6.1.4.1.30065.3.41.1.1.1.2
TimeTicks
The amount of time since this SWAG member was last initialized.
1.3.6.1.4.1.30065.3.41.1.1.1.3
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This device's notion of the local date and time of day.
1.3.6.1.4.1.30065.3.41.1.1.1.4
Gauge32
The number of distinct users currently logged into the device.
1.3.6.1.4.1.30065.3.41.1.1.1.5
Gauge32
The number of process contexts currently loaded or running on this SWAG member.
1.3.6.1.4.1.30065.3.41.1.1.1.6
KBytesStorage size, expressed in units of 1024 bytes. (0..2147483647) · Integer32
The amount of physical read-write main memory, typically RAM, contained by this SWAG member.
1.3.6.1.4.1.30065.3.41.1.2
Index: aristaSwagProcessorMemberId · aristaSwagProcessorIndex
This table describes the utilization of every processing unit in the system, across all members in the SWAG that this device is a part of.
1.3.6.1.4.1.30065.3.41.1.2.1.1
SwagMemberIdA unique value, greater than zero, for each SWAG device. Note that SWAG members are currently limited to a smaller range. (1..256) · Integer32 · hint d
SWAG member ID this entry corresponds to.
1.3.6.1.4.1.30065.3.41.1.2.1.2
Unsigned32
A unique identifier for each processor in the system.
1.3.6.1.4.1.30065.3.41.1.2.1.3
Integer32 (0..100)
The average, over the last minute, of the percentage of time that this processor was not idle.
1.3.6.1.4.1.30065.3.41.1.3
Index: aristaSwagStorageMemberId · aristaSwagStorageIndex
This table describes the logical storage areas of each member in the SWAG that this device is part of.
1.3.6.1.4.1.30065.3.41.1.3.1.1
SwagMemberIdA unique value, greater than zero, for each SWAG device. Note that SWAG members are currently limited to a smaller range. (1..256) · Integer32 · hint d
SWAG member ID this entry corresponds to.
1.3.6.1.4.1.30065.3.41.1.3.1.2
Integer32 (1..2147483647)
A unique value for each logical storage area contained by the host.
1.3.6.1.4.1.30065.3.41.1.3.1.3
AutonomousTypeRepresents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware. · OBJECT IDENTIFIER
The type of storage represented by this entry. See hrStorageTypes in HOST-RESOURCES-TYPES module for all available storage types.
1.3.6.1.4.1.30065.3.41.1.3.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A description of the type and instance of the storage described by this entry.
1.3.6.1.4.1.30065.3.41.1.3.1.5
Integer32 (0..2147483647)
The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number will commonly be greater than one. Otherwise this number will be one. This number will be 0 if there is an error collecting the allocation units.
1.3.6.1.4.1.30065.3.41.1.3.1.6
Integer32 (0..2147483647)
The size of the storage represented by this entry, in units of aristaSwagStorageAllocUnits.
1.3.6.1.4.1.30065.3.41.1.3.1.7
Integer32 (0..2147483647)
The amount of storage represented by this entry that is allocated, in units of aristaSwagStorageAllocUnits.