This table contains a list of logical interfaces used by SWAG members to access the backplane network, referred to as Backplane-Channels. Each Backplane-Channel interface is comprised of 1 (or more) front panel interfaces from a given member device. The SWAG member ID of this device is identified as the 'local' SWAG member ID. Each Backplane-Channel interface is directly connected to another member device. The SWAG member ID of this adjacent device is identified as the 'remote' SWAG member ID.
aristaSwagBaIfIndex
1.3.6.1.4.1.30065.3.40.1.1.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The value of the ifIndex object, defined in IF-MIB for the Backplane-Channel interface.
aristaSwagBaIfLocalMemberId
1.3.6.1.4.1.30065.3.40.1.1.1.2
SwagMemberIdA unique value, greater than zero, for each SWAG device. Note that SWAG members are currently limited to a smaller range. (1..256) · Integer32 · hint d
The SWAG member ID of the member to which this Backplane-Channel is associated.
aristaSwagBaIfRemoteMemberId
1.3.6.1.4.1.30065.3.40.1.1.1.3
SwagMemberIdA unique value, greater than zero, for each SWAG device. Note that SWAG members are currently limited to a smaller range. (1..256) · Integer32 · hint d
The SWAG member ID of the member to which this Backplane-Channel is configured to be directly connected.
This table describes the FIB for each SWAG member in the backplane network. For each pair of source and destination members, this table indicates the Backplane-Channel interface on the source device used to forward traffic to reach the destination device in the shortest path. Additionally, this table includes the reachability status of the destination device, which indicates whether it is currently reachable from the source device.
The SWAG backplane network is expected to be a full mesh, with all members able to reach each other. However, due to misconfiguration, it is possible that no path exists between a given source and destination. In this case, no entry will be present in this table. It is also possible for a path to exist but -- due to network events e.g. link or power failures -- be broken, rendering the destination unreachable from the source. In this case, the entry's aristaSwagReachabilityBaIfIndex will be 0.
aristaSwagReachabilitySrcId
1.3.6.1.4.1.30065.3.40.1.2.1.1
SwagMemberIdA unique value, greater than zero, for each SWAG device. Note that SWAG members are currently limited to a smaller range. (1..256) · Integer32 · hint d
SWAG member ID for the source device from which reachability to a target is analyzed.
aristaSwagReachabilityDestId
1.3.6.1.4.1.30065.3.40.1.2.1.2
SwagMemberIdA unique value, greater than zero, for each SWAG device. Note that SWAG members are currently limited to a smaller range. (1..256) · Integer32 · hint d
SWAG member ID for the destination device being reached.
aristaSwagReachabilityBaIfIndex
1.3.6.1.4.1.30065.3.40.1.2.1.3
InterfaceIndexOrZeroThis textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits the additional value of zero. the value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where interface was unknown, or when none or all interfaces need to be referenced. (0..2147483647) · Integer32 · hint d
The value of the ifIndex object, defined in IF-MIB for the corresponding Backplane-Channel interface used for reachability. This interface is associated with the device identified by aristaSwagReachabilitySrcId and will be greater than 0 if the destination is reachable, and 0 if the destination is unreachable.
aristaSwagReachabilityState
1.3.6.1.4.1.30065.3.40.1.2.1.4
SwagReachabilityState1 = configured2 = failed3 = reachable4 = pending5 = stale6 = unreachableThe current reachability state of the destination SWAG member. reachable(1) - this state indicates that the destination device has a valid forwarding path from the source device. unreachable(2) - this state indicates that no path exists between the source and destination device. · Integer32
The reachability status of a destination device.
aristaSwagReachabilityLastUpdate
1.3.6.1.4.1.30065.3.40.1.2.1.5
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The sysUpTime value when the reachability status for this entry was last updated.