EZ5 MIB Catalog

ARISTA-TUNNEL-MIB

2025-05-21

Download ARISTA-TUNNEL-MIB.txt Open ARISTA-TUNNEL-MIB.txt in a new tab

The MIB module for additional tunnel information on Arista devices.

TABLES (1)

Tables (1)

NameOID
aristaIpsecTunnelIfTable1.3.6.1.4.1.30065.3.34.1.1

END OF TOC

Table details

aristaIpsecTunnelIfTable

1.3.6.1.4.1.30065.3.34.1.1

Index: ifIndex

This table contains information on IPsec tunnel interfaces.

from IF-MIB

ifIndex

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.

aristaIpsecTunnelIfConnState

1.3.6.1.4.1.30065.3.34.1.1.1.1

AristaIpsecTunnelConnectionState0 = unknown1 = connecting2 = idle3 = established4 = shut5 = fipsUnsupported6 = connected7 = ikeVersionUnsupportedWithVrf8 = notKeyLenAlignedA value that represents the connection state of an IPsec tunnel. unknown(0) The connection state could not be determined. connecting(1) The device is trying to connect to the peer. idle(2) IPsec connections will be accepted, but not initiated. established(3) IPsec connection is up, and IPsec SAs are programmed in the data path. shut(4) Configuration is present, but the tunnel is in shutdown state. fipsUnsupported(5) FIPS is enabled and an unsupported configuration is present; IPsec connections will not be initiated or accepted. connected(6) IPsec connection is up, but IPsec SAs are not yet programmed in the data path. ikeVersionUnsupportedWithVrf(7) The configuration is unsupported because tunnels with non-default underlay VRFs only allow IKE version 2. notKeyLenAligned(8) The configuration is unsupported the encryption key length of IKE is smaller than encryption key length of IPsec. · Integer32

The connection state of the IPsec tunnel identified by this entry.

↑ To TOC