ATM-ACCOUNTING-INFORMATION-MIB

1996-11-05

Download ATM-ACCOUNTING-INFORMATION-MIB.txt Open ATM-ACCOUNTING-INFORMATION-MIB.txt in a new tab

The MIB module for identifying items of accounting information which are applicable to ATM connections.

Scalars (33)

Name	OID
atmAcctngConnectionType	1.3.6.1.2.1.59.1.1.1
atmAcctngCastType	1.3.6.1.2.1.59.1.1.2
atmAcctngIfName	1.3.6.1.2.1.59.1.1.3
atmAcctngIfAlias	1.3.6.1.2.1.59.1.1.4
atmAcctngVpi	1.3.6.1.2.1.59.1.1.5
atmAcctngVci	1.3.6.1.2.1.59.1.1.6
atmAcctngCallingParty	1.3.6.1.2.1.59.1.1.7
atmAcctngCalledParty	1.3.6.1.2.1.59.1.1.8
atmAcctngCallReference	1.3.6.1.2.1.59.1.1.9
atmAcctngStartTime	1.3.6.1.2.1.59.1.1.10
atmAcctngCollectionTime	1.3.6.1.2.1.59.1.1.11
atmAcctngCollectMode	1.3.6.1.2.1.59.1.1.12
atmAcctngReleaseCause	1.3.6.1.2.1.59.1.1.13
atmAcctngServiceCategory	1.3.6.1.2.1.59.1.1.14
atmAcctngTransmittedCells	1.3.6.1.2.1.59.1.1.15
atmAcctngTransmittedClp0Cells	1.3.6.1.2.1.59.1.1.16
atmAcctngReceivedCells	1.3.6.1.2.1.59.1.1.17
atmAcctngReceivedClp0Cells	1.3.6.1.2.1.59.1.1.18
atmAcctngTransmitTrafficDescriptorType	1.3.6.1.2.1.59.1.1.19
atmAcctngTransmitTrafficDescriptorParam1	1.3.6.1.2.1.59.1.1.20
atmAcctngTransmitTrafficDescriptorParam2	1.3.6.1.2.1.59.1.1.21
atmAcctngTransmitTrafficDescriptorParam3	1.3.6.1.2.1.59.1.1.22
atmAcctngTransmitTrafficDescriptorParam4	1.3.6.1.2.1.59.1.1.23
atmAcctngTransmitTrafficDescriptorParam5	1.3.6.1.2.1.59.1.1.24
atmAcctngReceiveTrafficDescriptorType	1.3.6.1.2.1.59.1.1.25
atmAcctngReceiveTrafficDescriptorParam1	1.3.6.1.2.1.59.1.1.26
atmAcctngReceiveTrafficDescriptorParam2	1.3.6.1.2.1.59.1.1.27
atmAcctngReceiveTrafficDescriptorParam3	1.3.6.1.2.1.59.1.1.28
atmAcctngReceiveTrafficDescriptorParam4	1.3.6.1.2.1.59.1.1.29
atmAcctngReceiveTrafficDescriptorParam5	1.3.6.1.2.1.59.1.1.30
atmAcctngCallingPartySubAddress	1.3.6.1.2.1.59.1.1.31
atmAcctngCalledPartySubAddress	1.3.6.1.2.1.59.1.1.32
atmAcctngRecordCrc16	1.3.6.1.2.1.59.1.1.33

END OF TOC

Scalar details

atmAcctngConnectionType

1.3.6.1.2.1.59.1.1.1

INTEGER1 = pvc2 = pvp3 = svcIncoming4 = svcOutgoing5 = svpIncoming6 = svpOutgoing7 = spvcInitiator8 = spvcTarget9 = spvpInitiator10 = spvpTarget · Integer32

The type of connection.

atmAcctngCastType

1.3.6.1.2.1.59.1.1.2

INTEGER1 = p2p2 = p2mp · Integer32

An indication of whether the connection is point-to-point or point-to-multipoint.

atmAcctngIfName

1.3.6.1.2.1.59.1.1.3

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

A textual name for the interface on which the data for the connection was collected. If the local SNMP agent supports the object ifName, the value of this object must be identical to that of ifName in the conceptual row of the ifTable corresponding to this interface.

atmAcctngIfAlias

1.3.6.1.2.1.59.1.1.4

The 'alias' name for the interface as specified by a network manager, e.g., via a management set operation to modify the relevant instance of the ifAlias object. Note that in contrast to ifIndex, ifAlias provides a non-volatile 'handle' for the interface, the value of which is retained across agent reboots.

atmAcctngVpi

1.3.6.1.2.1.59.1.1.5

INTEGER (0..4095) · Integer32

The VPI used for the connection.

atmAcctngVci

1.3.6.1.2.1.59.1.1.6

INTEGER (0..65535) · Integer32

The VCI used for the connection.

atmAcctngCallingParty

1.3.6.1.2.1.59.1.1.7

AtmAddrAn ATM address. The semantics are implied by the length. The address types are: - no address (0 octets) - E.164 (8 octets) - NSAP (20 octets) In addition, when subaddresses are used the AtmAddr may represent the concatenation of address and subaddress. The associated address types are: - E.164, E.164 (16 octets) - E.164, NSAP (28 octets) - NSAP, NSAP (40 octets) Address lengths other than defined in this definition imply address types defined elsewhere. Note: The E.164 address is encoded in BCD format. SIZE (0..40) · OCTET STRING · hint 1x

The connection's calling party. If unknown (e.g., for a PVC), then the value of this object is the zero-length string.

atmAcctngCalledParty

1.3.6.1.2.1.59.1.1.8

The connection's called party. If unknown (e.g., for a PVC), then the value of this object is the zero-length string.

atmAcctngCallReference

1.3.6.1.2.1.59.1.1.9

OCTET STRING SIZE (0..3)

The connection's call reference value (e.g., from Q.2931). If unknown (e.g., for a PVC), then the value of this object is the zero-length string.

atmAcctngStartTime

1.3.6.1.2.1.59.1.1.10

DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d

The time when the connection was established.

atmAcctngCollectionTime

1.3.6.1.2.1.59.1.1.11

The time at which the data in this record was collected.

atmAcctngCollectMode

1.3.6.1.2.1.59.1.1.12

INTEGER1 = onRelease2 = periodically3 = onCommand · Integer32

The reason why this connection data was collected.

atmAcctngReleaseCause

1.3.6.1.2.1.59.1.1.13

Integer32

If the connection data was collected because of the release of an SVC, then this is the cause code in the Release message for the connection; otherwise, this object has the value zero.

atmAcctngServiceCategory

1.3.6.1.2.1.59.1.1.14

INTEGER1 = other2 = cbr3 = vbrRt4 = vbrNrt5 = abr6 = ubr7 = unknown · Integer32

The connection's service category.

atmAcctngTransmittedCells

1.3.6.1.2.1.59.1.1.15

Counter64 (0..18446744073709551615)

The number of cells, including OAM cells, transmitted by this switch on this connection.

atmAcctngTransmittedClp0Cells

1.3.6.1.2.1.59.1.1.16

Counter64 (0..18446744073709551615)

The number of cells with CLP=0, including OAM cells, transmitted by this switch on this connection.

atmAcctngReceivedCells

1.3.6.1.2.1.59.1.1.17

Counter64 (0..18446744073709551615)

The number of cells, including OAM cells, received by this switch on this connection.

atmAcctngReceivedClp0Cells

1.3.6.1.2.1.59.1.1.18

Counter64 (0..18446744073709551615)

The number of cells with CLP=0, including OAM cells, received by this switch on this connection.

atmAcctngTransmitTrafficDescriptorType

1.3.6.1.2.1.59.1.1.19

OBJECT IDENTIFIER

The traffic descriptor type (as defined in RFC 1695 and its successors) in the direction in which the switch transmits cells on the connection.

atmAcctngTransmitTrafficDescriptorParam1

1.3.6.1.2.1.59.1.1.20

INTEGER (0..2147483647) · Integer32

The first traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.

atmAcctngTransmitTrafficDescriptorParam2

1.3.6.1.2.1.59.1.1.21

INTEGER (0..2147483647) · Integer32

The second traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.

atmAcctngTransmitTrafficDescriptorParam3

1.3.6.1.2.1.59.1.1.22

INTEGER (0..2147483647) · Integer32

The third traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.

atmAcctngTransmitTrafficDescriptorParam4

1.3.6.1.2.1.59.1.1.23

INTEGER (0..2147483647) · Integer32

The fourth traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.

atmAcctngTransmitTrafficDescriptorParam5

1.3.6.1.2.1.59.1.1.24

INTEGER (0..2147483647) · Integer32

The fifth traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.

atmAcctngReceiveTrafficDescriptorType

1.3.6.1.2.1.59.1.1.25

OBJECT IDENTIFIER

The traffic descriptor type (as defined in RFC 1695 and its successors) in the direction in which this switch receives cells on this connection.

atmAcctngReceiveTrafficDescriptorParam1

1.3.6.1.2.1.59.1.1.26

INTEGER (0..2147483647) · Integer32

The first traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.

atmAcctngReceiveTrafficDescriptorParam2

1.3.6.1.2.1.59.1.1.27

INTEGER (0..2147483647) · Integer32

The second traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.

atmAcctngReceiveTrafficDescriptorParam3

1.3.6.1.2.1.59.1.1.28

INTEGER (0..2147483647) · Integer32

The third traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.

atmAcctngReceiveTrafficDescriptorParam4

1.3.6.1.2.1.59.1.1.29

INTEGER (0..2147483647) · Integer32

The fourth traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.

atmAcctngReceiveTrafficDescriptorParam5

1.3.6.1.2.1.59.1.1.30

INTEGER (0..2147483647) · Integer32

The fifth traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.

atmAcctngCallingPartySubAddress

1.3.6.1.2.1.59.1.1.31

The connection's calling party sub-address. If the connection has no calling party sub-address, or it's value is unknown, then the value of this object is the zero-length string.

atmAcctngCalledPartySubAddress

1.3.6.1.2.1.59.1.1.32

The connection's called party sub-address. If the connection has no called party sub-address, or it's value is unknown, then the value of this object is the zero-length string.

atmAcctngRecordCrc16

1.3.6.1.2.1.59.1.1.33

OCTET STRING SIZE (2)

The value of the CRC-16 checksum (as defined by ISO 3309 (HDLC) and/or ITU X.25) calculated over the accounting record containing this object. While the mechanism for calculating/encoding the checksum value is specific to the method of encoding the accounting record, an accounting record containing this object is typically generated by initializing the value of this object to the all-zeros string ('0000'H), with the location of these zeros being saved. After generating the record, the checksum is calculated over the whole connection record and then the all-zeros value is overwritten (at the saved location) by the calculated value of the checksum.

↑ To TOC