Download ATM-FORUM-MIB.txt Open ATM-FORUM-MIB.txt in a new tab
| Name | OID |
|---|---|
| atmfMyIpNmAddress | 1.3.6.1.4.1.353.2.1.2 |
END OF TOC
1.3.6.1.4.1.353.2.1.2
IpAddress SIZE (4)
An IP Address to which a Network Management Station can send Network Management protocol, e.g. SNMP messages to UDP port 161, in order to access network management information concerning the operation of the ATM devide local to this UME.
1.3.6.1.4.1.353.2.1.1
Index: atmfPortIndex
A table of physical layer status and parameter information for the UNI's physical interface.
1.3.6.1.4.1.353.2.1.1.1.1
INTEGER (0..2147483647) · Integer32
A unique value which identifies this port. The value of 0 has the special meaning of identifying the local UNI.
1.3.6.1.4.1.353.2.1.1.1.2
AtmAddress SIZE (0..32) · OCTET STRING
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. The Address Group, defined as part of the separate Address Registration MIB should be used instead.
1.3.6.1.4.1.353.2.1.1.1.3
OBJECT IDENTIFIER
The transmission type of this port. For example, for a port using the Sonet STS-3c physical layer at 155.52 Mbs, this object would have the Object Identifier value: atmfSonetSTS3c.
1.3.6.1.4.1.353.2.1.1.1.4
OBJECT IDENTIFIER
The type of media being used on this port. For example, for a port using coaxial cable, this object would have the Object Identifier value: atmfMediaCoaxCable.
1.3.6.1.4.1.353.2.1.1.1.5
INTEGER1 = other2 = inService3 = outOfService4 = loopBack · Integer32
The operational (i.e., actual) state of this port. The ILMI should not alarm on a physical interface for when the value of this object is outOfService(3). This capability is useful if equipment is to be disconnected, or for troubleshooting purposes. A value of loopBack(4) indicates that a local loopback is in place.
1.3.6.1.4.1.353.2.1.1.1.6
OBJECT IDENTIFIER
This object 'points' to additional transmission and/or media specific information relating to this port. In particular, this object's value is the name of a specific instance of the first columnar object of a MIB table with such additional information, where the specific instance is the one which corresponds to this port. For example, for a DS3 interface, this object would contain the value, as defined in RFC 1407: dsx3LineIndex.i where i would be the integer value uniquely identifying the DS3 interface corresponding to this port. If no additional transmission and/or media specific information is available, this object has the value { 0 0 }.
1.3.6.1.4.1.353.2.1.1.1.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual name of this interface. If this systme is manageable through SNMP, and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely names on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string.
1.3.6.1.4.1.353.2.2.1
Index: atmfAtmLayerIndex
A table of ATM layer status and parameter information for the UNI's physical interface.
1.3.6.1.4.1.353.2.2.1.1.1
INTEGER (0..2147483647) · Integer32
The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI.
1.3.6.1.4.1.353.2.2.1.1.2
INTEGER (0..255) · Integer32
The maximum number of switched and permanent VPCs supported on this UNI.
1.3.6.1.4.1.353.2.2.1.1.3
INTEGER (0..16777215) · Integer32
The maximum number of switched and permanent VCCs supported on this UNI.
1.3.6.1.4.1.353.2.2.1.1.4
INTEGER (0..255) · Integer32
The number of permanent VPCs configured for use on this UNI.
1.3.6.1.4.1.353.2.2.1.1.5
INTEGER (0..16777215) · Integer32
The number of permanent VCCs configured for use on this UNI.
1.3.6.1.4.1.353.2.2.1.1.6
INTEGER (0..8) · Integer32
The number of active VPI bits on this interface.
1.3.6.1.4.1.353.2.2.1.1.7
INTEGER (0..16) · Integer32
The number of active VCI bits on this interface.
1.3.6.1.4.1.353.2.2.1.1.8
INTEGER1 = public2 = private · Integer32
The type of the ATM UNI, either public or private.
1.3.6.1.4.1.353.2.2.1.1.9
INTEGER1 = version2point02 = version3point03 = version3point1 · Integer32
An indication of the latest version of the ATM Forum UNI Specification that is supported on this UNI. If this value is not present, a version of the UNI earlier than 3.1 is supported. If a value greated than version3point1 is persent, then UNI 3.1 communication should be attempt. If the peer UNE's value of this object is the same as, or later than the local UME's value, then the version corresponding to the local UME's value should be attempted. Otherwise, if the peer UME's value of this object is earlier, and supported locally, then the local UME should attempt the version corresponding to the peer UME's value. Otherwise, compatability of the two UMEs cannot be assumed.
1.3.6.1.4.1.353.2.3.1
Index: atmfAtmStatsIndex
A table of ATM layer statistics information for the UNI's physical interface.
1.3.6.1.4.1.353.2.3.1.1.1
INTEGER (0..2147483647) · Integer32
The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI.
1.3.6.1.4.1.353.2.3.1.1.2
Counter · Counter32
The accumulated number of ATM cells received on this UNI which were assigned and not dropped.
1.3.6.1.4.1.353.2.3.1.1.3
Counter · Counter32
The accumulated number of ATM cells which were dropped for the reasons defined in section 4.4.4.2.
1.3.6.1.4.1.353.2.3.1.1.4
Counter · Counter32
The accumulated number of assigned ATM cells which were transmitted across this interface.
1.3.6.1.4.1.353.2.4.1
Index: atmfVpcPortIndex · atmfVpcVpi
A table of status and parameter information on the virtual path connections which cross this UNI. These is one entry in this table for each permanent virtual path connection.
1.3.6.1.4.1.353.2.4.1.1.1
INTEGER (0..2147483647) · Integer32
The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI.
1.3.6.1.4.1.353.2.4.1.1.2
INTEGER (0..255) · Integer32
The VPI value of this Virtual Path Connection at the local UNI.
1.3.6.1.4.1.353.2.4.1.1.3
INTEGER1 = unknown2 = end2endUp3 = end2endDown4 = localUpEnd2endUnknown5 = localDown · Integer32
The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used.
1.3.6.1.4.1.353.2.4.1.1.4
OBJECT IDENTIFIER
The type of traffic management, applicable to the transmit direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcTransmitTrafficDescriptorParam1, atmfVpcTransmitTrafficDescriptorParam2, atmfVpcTransmitTrafficDescriptorParam3, atmfVpcTransmitTrafficDescriptorParam4, and atmfVpcTransmitTrafficDescriptorParam5.
1.3.6.1.4.1.353.2.4.1.1.5
INTEGER (0..2147483647) · Integer32
The first parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.6
INTEGER (0..2147483647) · Integer32
The second parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.7
INTEGER (0..2147483647) · Integer32
The third parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.8
INTEGER (0..2147483647) · Integer32
The fourth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.9
INTEGER (0..2147483647) · Integer32
The fifth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.10
OBJECT IDENTIFIER
The type of traffic management, applicable to the traffic in the receive direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcReceiveTrafficDescriptorParam1, atmfVpcReceiveTrafficDescriptorParam2, atmfVpcReceiveTrafficDescriptorParam3, atmfVpcReceiveTrafficDescriptorParam4, and atmfVpcReceiveTrafficDescriptorParam5.
1.3.6.1.4.1.353.2.4.1.1.11
INTEGER (0..2147483647) · Integer32
The first parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.12
INTEGER (0..2147483647) · Integer32
The second parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.13
INTEGER (0..2147483647) · Integer32
The third parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.14
INTEGER (0..2147483647) · Integer32
The fourth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.15
INTEGER (0..2147483647) · Integer32
The fifth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.4.1.1.16
INTEGER1 = other2 = deterministic3 = statistical4 = unspecified · Integer32
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification.
1.3.6.1.4.1.353.2.4.1.1.17
INTEGER (0..255) · Integer32
The QoS Class, as defined in section 4 of Appendix A, for the transmit direction of this VPC connection at the local UNI.
1.3.6.1.4.1.353.2.4.1.1.18
INTEGER (0..255) · Integer32
The QoS Class, as defined in section 4 of Appendix A, for the receive direction of this VPC connection at the local UNI.
1.3.6.1.4.1.353.2.5.1
Index: atmfVccPortIndex · atmfVccVpi · atmfVccVci
A table of status and parameter information on the virtual channel connections which are visible at this UNI. There is one entry in this table for each permanent virtual channel connection, including reserved VCC that are supported: e.g., signalling, OAM flows, and ILMI, but not unassigned cells.
1.3.6.1.4.1.353.2.5.1.1.1
INTEGER (0..2147483647) · Integer32
The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI.
1.3.6.1.4.1.353.2.5.1.1.2
INTEGER (0..255) · Integer32
The VPI value of this Virtual Channel Connection at the local UNI.
1.3.6.1.4.1.353.2.5.1.1.3
INTEGER (0..65535) · Integer32
The VCI value of this Virtual Channel Connection at the local UNI.
1.3.6.1.4.1.353.2.5.1.1.4
INTEGER1 = unknown2 = end2endUp3 = end2endDown4 = localUpEnd2endUnknown5 = localDown · Integer32
The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end to end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used.
1.3.6.1.4.1.353.2.5.1.1.5
OBJECT IDENTIFIER
The type of traffic management, applicable to the transmit direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccTransmitTrafficDescriptorParam1, atmfVccTransmitTrafficDescriptorParam2, atmfVccTransmitTrafficDescriptorParam3, atmfVccTransmitTrafficDescriptorParam4, and atmfVccTransmitTrafficDescriptorParam5.
1.3.6.1.4.1.353.2.5.1.1.6
INTEGER (0..2147483647) · Integer32
The first parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.7
INTEGER (0..2147483647) · Integer32
The second parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.8
INTEGER (0..2147483647) · Integer32
The third parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.9
INTEGER (0..2147483647) · Integer32
The fourth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.10
INTEGER (0..2147483647) · Integer32
The fifth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.11
OBJECT IDENTIFIER
The type of traffic management, applicable to the traffic in the receive direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccReceiveTrafficDescriptorParam1, atmfVccReceiveTrafficDescriptorParam2, atmfVccReceiveTrafficDescriptorParam3, atmfVccReceiveTrafficDescriptorParam4, and atmfVccReceiveTrafficDescriptorParam5.
1.3.6.1.4.1.353.2.5.1.1.12
INTEGER (0..2147483647) · Integer32
The first parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.13
INTEGER (0..2147483647) · Integer32
The second parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.14
INTEGER (0..2147483647) · Integer32
The third parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.15
INTEGER (0..2147483647) · Integer32
The fourth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.16
INTEGER (0..2147483647) · Integer32
The fifth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
1.3.6.1.4.1.353.2.5.1.1.17
INTEGER1 = other2 = deterministic3 = statistical4 = unspecified · Integer32
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification.
1.3.6.1.4.1.353.2.5.1.1.18
INTEGER (0..255) · Integer32
The QoS Class, as defined in section 4 of Appendix A, for the transmit direction of this VCC connection at the local UNI.
1.3.6.1.4.1.353.2.5.1.1.19
INTEGER (0..255) · Integer32
The QoS Class, as defined in section 4 of Appendix A, for the receive direction of this VCC connection at the local UNI.
1.3.6.1.4.1.353.2.6.1
Index: atmfAddressPort · atmfAddressAtmAddress
A table implemented by the network-side of an ATM UNI port, containing the ATM-layer addresses in effect on the user-side of the UNI.
1.3.6.1.4.1.353.2.6.1.1.1
INTEGER (0..2147483647) · Integer32
A unique value which identifies the UNI port for which the ATM address is in effect. The value of 0 has the special meaning of identifying the local UNI.
1.3.6.1.4.1.353.2.6.1.1.2
AtmAddress2 SIZE (8 | 20) · OCTET STRING
The ATM address which is in effect on the user-side of the ATM UNI port.
1.3.6.1.4.1.353.2.6.1.1.3
INTEGER1 = valid2 = invalid · Integer32
An indication of the validity of the ATM address at the user-side of the UNI port. To configure a new address in this table, the user-side must set the appropriate instance of this object to the value valid(1). To delete an existing address in this able, the user-side must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the network-side which cause an address to become invalid, the network-side modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular address becomes invalid(2), the conceptual row for that address may be removed from the table at anytime, either immediately or subsequently.
1.3.6.1.4.1.353.2.7.1
Index: atmfNetPrefixPort · atmfNetPrefixPrefix
A table implemented by the UNI Management Entity on the user-side of an ATM UNI port, containing the network-prefix(es) for ATM-layer addresses in effect on the user-side of the UNI.
1.3.6.1.4.1.353.2.7.1.1.1
INTEGER (0..2147483647) · Integer32
A unique value which identifies the UNI port for which the network prefix for ATM addresses is in effect. The value of 0 has the special meaning of identifying the local UNI.
1.3.6.1.4.1.353.2.7.1.1.2
NetPrefix SIZE (8 | 13) · OCTET STRING
The network prefix for ATM addresses which is in effect on the user-side of the ATM UNI port.
1.3.6.1.4.1.353.2.7.1.1.3
INTEGER1 = valid2 = invalid · Integer32
An indication of the validity of the network prefix for ATM addresses on the user-side of the UNI port. To configure a new network prefix in this table, the network-side must set the appropriate instance of this object to the value valid(1). To delete an existing network prefix in this table, the network-side must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the user-side which cause a prefix to become invalid, the user-side modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular prefix becomes invalid(2), the conceptual row for that prefix may be removed from the table at anytime, either immediately or subsequently.