CISCO-AAA-SESSION-MIB

CasnSessionIdRepresents an Accounting Session Identifier. The session identifier is used as an unique identifier for a session within the system. (1..4294967295) · Unsigned32

This is the session identification used by the accounting protocol. This value is unique to a session within the system, even if multiple accounting protocols are in use. The value of this object corresponds to these accounting protocol attributes. RADIUS: attribute 44, Acct-Session-Id TACACS+: attribute 'task_id'

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a

The User login ID or zero length string if unavailable. The value of this object corresponds to these accounting protocol attributes. RADIUS: attribute 1, User-Name TACACS+: attribute 'user'

IpAddress SIZE (4)

The IP address of the session or 0.0.0.0 if not applicable or unavailable. RADIUS: attribute 8, Framed-IP-Address TACACS+: attribute 'addr'

Gauge32 · seconds

The elapsed time that this session has been idle. This is the time since the last user-level data has been received or transmitted. Protocol level handshaking associated with the call is considered to be idle for this object.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object is used to terminate this session. Setting the value to true(1) will initiate termination of this session. The entry will be removed once the session has completed termination. Once this object has been set to true(1), the session termination process can not be cancelled by setting the value false(2).

CctCallIdRepresents a Call Identifier. The call identifier is used as an unique identifier for an call within the system. A zero value indicates no call ID. · Unsigned32

The value of this object is the entry index in the CISCO-CALL-TRACKER-MIB cctActiveTable of the call corresponding to this accounting session. Using the value of this object to query the cctActiveTable will provide more detailed data regarding the session represented by this casnActiveEntry.

RowPointerRepresents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable (note that if ifIndex were not-accessible, then ifDescr.3 would be used instead). · OBJECT IDENTIFIER

The value of this object identifies a particular conceptual row associated with the session identified by casnSessionId. The conceptual row that this object points to represents a port that is used to transport a session. If the port transporting the session cannot be determined, the value of this object will be zeroDotZero. For example, suppose a session is established using an ATM PVC. If the ifIndex of the ATM interface is 7, and the VPI/VCI values of the PVC are 1, 100 respectively, then the value of this object might be as follows: casnNasPort.15 = atmVclAdminStatus.7.1.100 ^ ^ ^ ^ | | | | casnSessionId --+ | | | ifIndex -------------------------+ | | atmVclVpi ---------------------------+ | atmVclVci ------------------------------+ where atmVclAdminStatus is the first accessible object of the atmVclTable of the ATM-MIB.

InterfaceIndexOrZeroThis textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits the additional value of zero. the value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where interface was unknown, or when none or all interfaces need to be referenced. (0..2147483647) · Integer32 · hint d

The ifIndex of the Virtual Access Interface (VAI) that is associated with the PPP session. This interface may not be represented in the IF-MIB in which case the value of this object will be zero.