This table contains ATM interface monitoring information not defined in the atmInterfaceConfTable from the ATM-MIB and atmInterfaceExtTable CISCO-IETF-ATM2-PVCTRAP-MIB.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfCurrentlyDownToUpPVcls
1.3.6.1.4.1.9.10.97.1.1.1.1
Gauge32
The current number PVCLs on this interface which changed state to 'up' since the last atmIntPvcUp2Trap was sent.
catmIntfOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.2
Gauge32
The total number of PVCLs in this interface which are currently in the OAM loopback failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurrentOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.3
Gauge32
The current number of PVCLs on this interface for which the OAM loop back has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfSegCCOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.4
Gauge32
The total number of PVCLs in this interface which are currently in the Segment CC OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurSegCCOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.5
Gauge32
The current number of PVCLs on this interface for which the Segment CC OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfEndCCOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.6
Gauge32
The total number of PVCLs in this interface which are currently in the End-to-End CC OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurEndCCOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.7
Gauge32
The current number of PVCLs on this interface for which the End-to-End CC OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfAISRDIOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.8
Gauge32
The total number of PVCLs in this interface which are currently in the AIS RDI OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurAISRDIOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.9
Gauge32
The current number of PVCLs on this interface for which the AIS RDI OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfAnyOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.10
Gauge32
The total number of PVCLs in this interface which are currently in any type of OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurAnyOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.11
Gauge32
The current number of PVCLs on this interface for which any of OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfTypeOfOAMFailure
1.3.6.1.4.1.9.10.97.1.1.1.12
CatmOAMFailureType1 = catmLoopbackOAMFailure2 = catmSegmentCCOAMFailure4 = catmEndCCOAMFailure8 = catmAISRDIOAMFailure16 = catmSegAISRDIOAMFailure32 = catmEndAISRDIOAMFailureEnums to indicate different types of OAM recoveries .
catmLoopbackOAMFailure - The object in query is Loopback OAM
type of failure. catmSegmentCCOAMFailure - The object in query is Segment CC OAM type of failure.
catmEndCCOAMFailure - The object in query is End-to-End
CC OAM type of failure.
catmAISRDIOAMFailure - The object in query is AISRDI OAM
type of failure. catmSegAISRDIOAMFailure - The object in query is Segment AISRDI OAM type of failure. catmEndAISRDIOAMFailure - The object in query is End AISRDI OAM type of failure. · Integer32
Type of OAM failure.
catmIntfOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.13
Gauge32
The total number of PVCLs in this interface which are currently in the OAM loopback recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurrentOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.14
Gauge32
The current number of PVCLs on this interface for which the OAM loop back has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfSegCCOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.15
Gauge32
The total number of PVCLs in this interface which are currently in the Segment CC OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurSegCCOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.16
Gauge32
The current number of PVCLs on this interface for which the Segment CC OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfEndCCOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.17
Gauge32
The total number of PVCLs in this interface which are currently in the End-to-End CC OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurEndCCOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.18
Gauge32
The current number of PVCLs on this interface for which the End-to-End CC OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfAISRDIOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.19
Gauge32
The total number of PVCLs in this interface which are currently in the AIS RDI OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurAISRDIOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.20
Gauge32
The current number of PVCLs on this interface for which the AIS RDI OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfAnyOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.21
Gauge32
The total number of PVCLs in this interface which are currently in any type of OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurAnyOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.22
Gauge32
The current number of PVCLs on this interface for which any of OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfTypeOfOAMRecover
1.3.6.1.4.1.9.10.97.1.1.1.23
CatmOAMRecoveryType1 = catmLoopbackOAMRecover2 = catmSegmentCCOAMRecover4 = catmEndCCOAMRecover8 = catmAISRDIOAMRecover16 = catmSegAISRDIOAMRecover32 = catmEndAISRDIOAMRecoverEnums to indicate different types of OAM recoveries .
catmLoopbackOAMRecover - The object in query is Loopback OAM
type of recovery. catmSegmentCCOAMRecover - The object in query is Segment CC OAM type of recovery.
catmEndCCOAMRecover - The object in query is End-to-End
CC OAM type of recovery.
catmAISRDIOAMRecover - The object in query is AISRDI OAM
type of recovery. catmSegAISRDIOAMRecover - The object in query is Segment AISRDI OAM type of recovery. catmEndAISRDIOAMRecover - The object in query is End AISRDI OAM type of recovery. · Integer32
Type of OAM Recovered
catmIntfSegAISRDIFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.24
Gauge32
The total number of PVCLs in this interface which are currently in the Segment AIS RDI OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurSegAISRDIFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.25
Gauge32
The current number of PVCLs on this interface for which the Segment AIS RDI OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfEndAISRDIFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.26
Gauge32
The total number of PVCLs in this interface which are currently in the End AIS RDI OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurEndAISRDIFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.27
Gauge32
The current number of PVCLs on this interface for which the End AIS RDI OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfSegAISRDIRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.28
Gauge32
The total number of PVCLs in this interface which are currently in the Segment AIS RDI OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurSegAISRDIRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.29
Gauge32
The current number of PVCLs on this interface for which the Segment AIS RDI OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfEndAISRDIRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.30
Gauge32
The total number of PVCLs on this interface which are currently in the End AIS RDI OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurEndAISRDIRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.31
Gauge32
The current number of PVCLs on this interface for which the End AIS RDI OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmCurStatChangePVclTable
1.3.6.1.4.1.9.10.97.1.2
Index: ifIndex · atmVclVpi · atmVclVci
A table indicating all VCLs for which there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and atmVclOperStatus to have changed in the last corresponding PVC notification.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
atmVclVci
AtmVcIdentifierThe VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. (0..65535) · Integer32
The VCI value of the VCL.
catmPVclStatusTransition
1.3.6.1.4.1.9.10.97.1.2.1.2
Counter32
The number of state transitions that has happened on this PVCL in the last corresponding notification.
catmPVclStatusChangeStart
1.3.6.1.4.1.9.10.97.1.2.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state for the
first time in the last corresponding notification.
catmPVclStatusChangeEnd
1.3.6.1.4.1.9.10.97.1.2.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp of the last state change of this PVCL in the last corresponding notification.
catmPVclSegCCStatusTransition
1.3.6.1.4.1.9.10.97.1.2.1.5
Counter32
The number of state transitions that has happened on this PVCL in the last corresponding notification due to Segment CC OAM failure.
catmPVclSegCCStatusChangeStart
1.3.6.1.4.1.9.10.97.1.2.1.6
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to Segment CC OAM failure.
catmPVclSegCCStatusChangeEnd
1.3.6.1.4.1.9.10.97.1.2.1.7
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp of the last state change of this PVCL in the last corresponding notification due to Segment CC OAM failure.
catmPVclEndCCStatusTransition
1.3.6.1.4.1.9.10.97.1.2.1.8
Counter32
The number of state transitions that has happened on this PVCL in the last corresponding notification due to End CC OAM failure.
catmPVclEndCCStatusChangeStart
1.3.6.1.4.1.9.10.97.1.2.1.9
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to End CC OAM failure.
catmPVclEndCCStatusChangeEnd
1.3.6.1.4.1.9.10.97.1.2.1.10
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp of the last state change of this PVCL in the last corresponding notification due to End CC OAM failure.
catmPVclAISRDIStatusTransition
1.3.6.1.4.1.9.10.97.1.2.1.11
Counter32
The number of state transitions that has happened on this PVCL in the last corresponding notification due to AIS RDI OAM failure.
catmPVclAISRDIStatusChangeStart
1.3.6.1.4.1.9.10.97.1.2.1.12
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to AIS RDI OAM failure.
catmPVclAISRDIStatusChangeEnd
1.3.6.1.4.1.9.10.97.1.2.1.13
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp of the last state change of this PVCL in the last corresponding notification due to AIS RDI OAM failure.
catmPVclCurFailTime
1.3.6.1.4.1.9.10.97.1.2.1.14
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to DOWN last time in the last corresponding notification .
catmPVclPrevRecoverTime
1.3.6.1.4.1.9.10.97.1.2.1.15
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to UP last time in the previous corresponding notification .
catmPVclFailureReason
1.3.6.1.4.1.9.10.97.1.2.1.16
CatmOAMFailureType1 = catmLoopbackOAMFailure2 = catmSegmentCCOAMFailure4 = catmEndCCOAMFailure8 = catmAISRDIOAMFailure16 = catmSegAISRDIOAMFailure32 = catmEndAISRDIOAMFailureEnums to indicate different types of OAM recoveries .
catmLoopbackOAMFailure - The object in query is Loopback OAM
type of failure. catmSegmentCCOAMFailure - The object in query is Segment CC OAM type of failure.
catmEndCCOAMFailure - The object in query is End-to-End
CC OAM type of failure.
catmAISRDIOAMFailure - The object in query is AISRDI OAM
type of failure. catmSegAISRDIOAMFailure - The object in query is Segment AISRDI OAM type of failure. catmEndAISRDIOAMFailure - The object in query is End AISRDI OAM type of failure. · Integer32
Type of OAM failure.
catmPVclSegAISRDIStatTransition
1.3.6.1.4.1.9.10.97.1.2.1.17
Gauge32
The number of state transitions that has happened on this PVCL in the last corresponding notification due to Segment AIS RDI OAM failure.
catmPVclSegAISRDIStatChangeStart
1.3.6.1.4.1.9.10.97.1.2.1.18
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to Segment AIS RDI OAM failure.
catmPVclSegAISRDIStatChangeEnd
1.3.6.1.4.1.9.10.97.1.2.1.19
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp of the last state change of this PVCL in the last corresponding notification due to Segment AIS RDI OAM failure.
catmPVclEndAISRDIStatTransition
1.3.6.1.4.1.9.10.97.1.2.1.20
Gauge32
The number of state transitions that has happened on this PVCL in the last corresponding notification due to End AIS RDI OAM failure.
catmPVclEndAISRDIStatChangeStart
1.3.6.1.4.1.9.10.97.1.2.1.21
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state for the
first time in the last corresponding notification due
to End AIS RDI OAM failure.
catmPVclEndAISRDIStatChangeEnd
1.3.6.1.4.1.9.10.97.1.2.1.22
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp of the last state change of this PVCL in the last corresponding notification due to End AIS RDI OAM failure.
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and atmVclOperStatus to have changed in the same direction in the last corresponding PVC notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmStatusChangePVclRangeIndex
1.3.6.1.4.1.9.10.97.1.3.1.1
INTEGER (0..65535) · Integer32
Index to represent different ranges, the first range is indexed by value 0, the second by 1 and so on...
catmPVclLowerRangeValue
1.3.6.1.4.1.9.10.97.1.3.1.2
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the atmVclOperStatus to have changed in the last corresponding notification due to Loopback OAM failure.
catmPVclHigherRangeValue
1.3.6.1.4.1.9.10.97.1.3.1.3
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the atmOperStatus to have changed in the last corresponding notification due to Loopback OAM failure.
catmPVclRangeStatusChangeStart
1.3.6.1.4.1.9.10.97.1.3.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first PVCL in the range changed state in the last corresponding notification due to Loopback OAM failure.
catmPVclRangeStatusChangeEnd
1.3.6.1.4.1.9.10.97.1.3.1.5
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last PVCL in the range changed state in the last corresponding notification due to Loopback OAM failure.
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and atmVclOperStatus to have changed due to segment CC failure in the same direction in the last PVC corresponding notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclSegCCLowerRangeValue
1.3.6.1.4.1.9.10.97.1.5.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the atmVclOperStatus to have changed in the last corresponding notification due to Segment CC OAM failure.
catmPVclSegCCHigherRangeValue
1.3.6.1.4.1.9.10.97.1.5.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the atmOperStatus to have changed in the last corresponding notification due to Segment CC OAM failure.
catmPVclSegCCRangeStatusChStart
1.3.6.1.4.1.9.10.97.1.5.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first PVCL in the range changed state in the last corresponding notification due to Segment CC OAM failure.
catmPVclSegCCRangeStatusChEnd
1.3.6.1.4.1.9.10.97.1.5.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last PVCL in the range changed state in the last corresponding notification due to Segment CC OAM failure.
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and atmVclOperStatus to have changed due to End CC failure in the same direction in the last PVC notification interval.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclEndCCLowerRangeValue
1.3.6.1.4.1.9.10.97.1.6.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the atmVclOperStatus to have changed in the last corresponding notification due to End CC OAM failure.
catmPVclEndCCHigherRangeValue
1.3.6.1.4.1.9.10.97.1.6.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the atmOperStatus to have changed in the last corresponding notification due to End CC OAM failure.
catmPVclEndCCRangeStatusChStart
1.3.6.1.4.1.9.10.97.1.6.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first PVCL in the range changed state in the last corresponding notification due to End CC OAM failure.
catmPVclEndCCRangeStatusChEnd
1.3.6.1.4.1.9.10.97.1.6.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last PVCL in the range changed state in the last corresponding notification due to End CC OAM failure.
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and atmVclOperStatus to have changed due to AIS/RDI failure in the same direction in the last corresponding PVC notification.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclAISRDILowerRangeValue
1.3.6.1.4.1.9.10.97.1.7.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the atmVclOperStatus to have changed in the last corresponding notification due to AISRDI OAM failure.
catmPVclAISRDIHigherRangeValue
1.3.6.1.4.1.9.10.97.1.7.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the atmOperStatus to have changed in the last corresponding notification due to AISRDI OAM failure.
catmPVclAISRDIRangeStatusChStart
1.3.6.1.4.1.9.10.97.1.7.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first PVCL in the range changed state in the last corresponding notification due to AISRDI OAM failure.
catmPVclAISRDIRangeStatusChEnd
1.3.6.1.4.1.9.10.97.1.7.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last PVCL in the range changed state in the last corresponding notification due to AISRDI OAM failure.
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and atmVclOperStatus to have detected as Down in the last corresponding PVC notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmDownPVclLowerRangeValue
1.3.6.1.4.1.9.10.97.1.8.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the atmVclOperStatus has been detected as Down in the corresponding notification .
catmDownPVclHigherRangeValue
1.3.6.1.4.1.9.10.97.1.8.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the atmVclOperStatus has been detected as Down in the corresponding notification .
catmDownPVclRangeStart
1.3.6.1.4.1.9.10.97.1.8.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first atmVclOperStatus is detected as Down on any of the PVCLs in the range in the corresponding notification .
catmDownPVclRangeEnd
1.3.6.1.4.1.9.10.97.1.8.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last atmVclOperStatus is detected as Down on any of the PVCLs in the range in the corresponding notification .
catmPrevUpPVclRangeStart
1.3.6.1.4.1.9.10.97.1.8.1.5
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first atmVclOperStatus is detected as Up on any of the PVCLs in the range in the previous catmIntfPvcUp2Trap notification.
catmPrevUpPVclRangeEnd
1.3.6.1.4.1.9.10.97.1.8.1.6
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last atmVclOperStatus is detected as Up on any of the PVCLs in the range in the previous catmIntfPvcUp2Trap notification.
catmPVclRangeFailureReason
1.3.6.1.4.1.9.10.97.1.8.1.7
CatmOAMFailureType1 = catmLoopbackOAMFailure2 = catmSegmentCCOAMFailure4 = catmEndCCOAMFailure8 = catmAISRDIOAMFailure16 = catmSegAISRDIOAMFailure32 = catmEndAISRDIOAMFailureEnums to indicate different types of OAM recoveries .
catmLoopbackOAMFailure - The object in query is Loopback OAM
type of failure. catmSegmentCCOAMFailure - The object in query is Segment CC OAM type of failure.
catmEndCCOAMFailure - The object in query is End-to-End
CC OAM type of failure.
catmAISRDIOAMFailure - The object in query is AISRDI OAM
type of failure. catmSegAISRDIOAMFailure - The object in query is Segment AISRDI OAM type of failure. catmEndAISRDIOAMFailure - The object in query is End AISRDI OAM type of failure. · Integer32
Type of OAM failure.
catmCurStatusUpPVclTable
1.3.6.1.4.1.9.10.97.1.9
Index: ifIndex · atmVclVpi · atmVclVci
A table indicating all VCLs for which there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and atmVclOperStatus to have changed to UP in the last corresponding PVC notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
atmVclVci
AtmVcIdentifierThe VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. (0..65535) · Integer32
The VCI value of the VCL.
catmPVclStatusUpTransition
1.3.6.1.4.1.9.10.97.1.9.1.1
Gauge32
The number of Down to Up state transitions due to OAM loopback recovery that has happened on this PVCL in the last corresponding notification .
catmPVclStatusUpStart
1.3.6.1.4.1.9.10.97.1.9.1.2
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to UP for the first time due to OAM loopback recovery in the last corresponding notification .
catmPVclStatusUpEnd
1.3.6.1.4.1.9.10.97.1.9.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to UP for the last time due to OAM loopback recovery in the last corresponding notification .
catmPVclSegCCStatusUpTransition
1.3.6.1.4.1.9.10.97.1.9.1.4
Gauge32
The number of Down to Up state transitions that has happened on this PVCL in the last corresponding notification due to Segment CC OAM recovery.
catmPVclSegCCStatusUpStart
1.3.6.1.4.1.9.10.97.1.9.1.5
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the first time in the last corresponding notification due to Segment CC OAM recovery.
catmPVclSegCCStatusUpEnd
1.3.6.1.4.1.9.10.97.1.9.1.6
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp of the last state change of this PVCL in the last corresponding notification due to Segment CC OAM recovery.
catmPVclEndCCStatusUpTransition
1.3.6.1.4.1.9.10.97.1.9.1.7
Gauge32
The number of Down to UP state transitions that has happened on this PVCL in the last notification interval due to End CC OAM recovery.
catmPVclEndCCStatusUpStart
1.3.6.1.4.1.9.10.97.1.9.1.8
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the first time in the last corresponding notification due to End CC OAM recovery.
catmPVclEndCCStatusUpEnd
1.3.6.1.4.1.9.10.97.1.9.1.9
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the last time in the last corresponding notification due to End CC OAM recovery.
catmPVclAISRDIStatusUpTransition
1.3.6.1.4.1.9.10.97.1.9.1.10
Gauge32
The number of Down to Up state transitions that has happened on this PVCL in the last notification interval due to AIS RDI OAM recovery.
catmPVclAISRDIStatusUpStart
1.3.6.1.4.1.9.10.97.1.9.1.11
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the first time in the last corresponding notification due to AIS/RDI OAM recovery.
catmPVclAISRDIStatusUpEnd
1.3.6.1.4.1.9.10.97.1.9.1.12
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the last time in the last corresponding notification due to AIS/RDI OAM recovery.
catmPVclCurRecoverTime
1.3.6.1.4.1.9.10.97.1.9.1.13
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to UP last time in the last corresponding notification .
catmPVclPrevFailTime
1.3.6.1.4.1.9.10.97.1.9.1.14
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to DOWN last time in the previous corresponding notification .
catmPVclRecoveryReason
1.3.6.1.4.1.9.10.97.1.9.1.15
CatmOAMRecoveryType1 = catmLoopbackOAMRecover2 = catmSegmentCCOAMRecover4 = catmEndCCOAMRecover8 = catmAISRDIOAMRecover16 = catmSegAISRDIOAMRecover32 = catmEndAISRDIOAMRecoverEnums to indicate different types of OAM recoveries .
catmLoopbackOAMRecover - The object in query is Loopback OAM
type of recovery. catmSegmentCCOAMRecover - The object in query is Segment CC OAM type of recovery.
catmEndCCOAMRecover - The object in query is End-to-End
CC OAM type of recovery.
catmAISRDIOAMRecover - The object in query is AISRDI OAM
type of recovery. catmSegAISRDIOAMRecover - The object in query is Segment AISRDI OAM type of recovery. catmEndAISRDIOAMRecover - The object in query is End AISRDI OAM type of recovery. · Integer32
Type of OAM Recovered
catmPVclSegAISRDIStatUpTransit
1.3.6.1.4.1.9.10.97.1.9.1.16
Gauge32
The number of Down to Up state transitions that has happened on this PVCL in the last notification interval due to Segment AIS RDI OAM recovery.
catmPVclSegAISRDIStatUpStart
1.3.6.1.4.1.9.10.97.1.9.1.17
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the first time in the last corresponding notification due to Segment AIS/RDI OAM recovery.
catmPVclSegAISRDIStatUpEnd
1.3.6.1.4.1.9.10.97.1.9.1.18
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the last time in the last corresponding notification due to Segment AIS/RDI OAM recovery.
catmPVclEndAISRDIStatUpTransit
1.3.6.1.4.1.9.10.97.1.9.1.19
Gauge32
The number of Down to Up state transitions that has happened on this PVCL in the last notification interval due to End AIS RDI OAM recovery.
catmPVclEndAISRDIStatUpStart
1.3.6.1.4.1.9.10.97.1.9.1.20
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the first time in the last corresponding notification due to End AIS/RDI OAM recovery.
catmPVclEndAISRDIStatUpEnd
1.3.6.1.4.1.9.10.97.1.9.1.21
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which this PVCL changed state to Up for the last time in the last corresponding notification due to End AIS/RDI OAM recovery.
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and loopback OAM status to have detected as recovered in the last corresponding PVC notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclUpLowerRangeValue
1.3.6.1.4.1.9.10.97.1.10.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the Loopback OAM recovery has been detected in the last corresponding notification .
catmPVclUpHigherRangeValue
1.3.6.1.4.1.9.10.97.1.10.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the Loopback OAM recovery has been detected in the last corresponding notification .
catmPVclRangeStatusUpStart
1.3.6.1.4.1.9.10.97.1.10.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first Loopback OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
catmPVclRangeStatusUpEnd
1.3.6.1.4.1.9.10.97.1.10.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last Loopback OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and Segment CC OAM status to have detected as recovered in the last corresponding PVC notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclSegCCUpLowerRangeValue
1.3.6.1.4.1.9.10.97.1.11.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the Segment CC OAM recovery has been detected in the last corresponding notification .
catmPVclSegCCUpHigherRangeValue
1.3.6.1.4.1.9.10.97.1.11.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the Segment CC OAM recovery has been detected in the last corresponding notification .
catmPVclSegCCRangeStatusUpStart
1.3.6.1.4.1.9.10.97.1.11.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first Segment CC OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
catmPVclSegCCRangeStatusUpEnd
1.3.6.1.4.1.9.10.97.1.11.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last Segment CC OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and End-to-End CC OAM status to have detected as recovered in the last corresponding PVC notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclEndCCUpLowerRangeValue
1.3.6.1.4.1.9.10.97.1.12.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the End-to-End CC OAM recovery has been detected in the last corresponding notification .
catmPVclEndCCUpHigherRangeValue
1.3.6.1.4.1.9.10.97.1.12.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the End-to-End CC OAM recovery has been detected in the last corresponding notification .
catmPVclEndCCRangeStatusUpStart
1.3.6.1.4.1.9.10.97.1.12.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first End-to-End CC OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
catmPVclEndCCRangeStatusUpEnd
1.3.6.1.4.1.9.10.97.1.12.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last End-to-End CC OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and AISRDI OAM status to have detected as recovered in the last corresponding PVC notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclAISRDIUpLowerRangeValue
1.3.6.1.4.1.9.10.97.1.13.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the AISRDI OAM recovery has been detected in the last corresponding notification .
catmPVclAISRDIUpHigherRangeValue
1.3.6.1.4.1.9.10.97.1.13.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the AISRDI OAM recovery has been detected in the last corresponding notification .
catmPVclAISRDIRangeStatusUpStart
1.3.6.1.4.1.9.10.97.1.13.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first AISRDI OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
catmPVclAISRDIRangeStatusUpEnd
1.3.6.1.4.1.9.10.97.1.13.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last AISRDI OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
A table indicating more than one VCLs in a consecutive range and for each VCL there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and atmVclOperStatus to have detected as Up in the last corresponding PVC notification .
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmUpPVclLowerRangeValue
1.3.6.1.4.1.9.10.97.1.14.1.1
INTEGER (0..65536) · Integer32
The first PVCL in a range of PVCLs for which the atmVclOperStatus has been detected as Up in the corresponding notification .
catmUpPVclHigherRangeValue
1.3.6.1.4.1.9.10.97.1.14.1.2
INTEGER (0..65536) · Integer32
The last PVCL in a range of PVCLs for which the atmVclOperStatus has been detected as Up in the corresponding notification .
catmUpPVclRangeStart
1.3.6.1.4.1.9.10.97.1.14.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first atmVclOperStatus is detected as Up on any of the PVCLs in the range in the corresponding notification .
catmUpPVclRangeEnd
1.3.6.1.4.1.9.10.97.1.14.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last atmVclOperStatus is detected as Up on any of the PVCLs in the range in the corresponding notification .
catmPrevDownPVclRangeStart
1.3.6.1.4.1.9.10.97.1.14.1.5
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first atmVclOperStatus is detected as Down on any of the PVCLs in the range in the previous catmIntfPvcDownTrap notification.
catmPrevDownPVclRangeEnd
1.3.6.1.4.1.9.10.97.1.14.1.6
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last atmVclOperStatus is detected as Down on any of the PVCLs in the range in the previous catmIntfPvcDownTrap notification.
catmPVclRangeRecoveryReason
1.3.6.1.4.1.9.10.97.1.14.1.7
CatmOAMRecoveryType1 = catmLoopbackOAMRecover2 = catmSegmentCCOAMRecover4 = catmEndCCOAMRecover8 = catmAISRDIOAMRecover16 = catmSegAISRDIOAMRecover32 = catmEndAISRDIOAMRecoverEnums to indicate different types of OAM recoveries .
catmLoopbackOAMRecover - The object in query is Loopback OAM
type of recovery. catmSegmentCCOAMRecover - The object in query is Segment CC OAM type of recovery.
catmEndCCOAMRecover - The object in query is End-to-End
CC OAM type of recovery.
catmAISRDIOAMRecover - The object in query is AISRDI OAM
type of recovery. catmSegAISRDIOAMRecover - The object in query is Segment AISRDI OAM type of recovery. catmEndAISRDIOAMRecover - The object in query is End AISRDI OAM type of recovery. · Integer32
This table lists the range of configured PVCs for which segment AIS/RDI failure is detected and which are in the segment AIS/RDI failed state. It also gives the information about the timestamp at which the the first and last segment AIS/RDI failure is detected for the range of PVCs.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclSegAISRDILowerRangeValue
1.3.6.1.4.1.9.10.97.1.15.1.1
Unsigned32 (0..65536)
The first PVCL in a range of PVCLs for which the atmVclOperStatus to have changed in the last corresponding notification due to Segment AISRDI OAM failure.
catmPVclSegAISRDIHigherRangeValue
1.3.6.1.4.1.9.10.97.1.15.1.2
Unsigned32 (0..65536)
The last PVCL in a range of PVCLs for which the atmOperStatus to have changed in the last corresponding notification due to Segment AISRDI OAM failure.
catmPVclSegAISRDIRangeStatChStart
1.3.6.1.4.1.9.10.97.1.15.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first PVCL in the range changed state in the last corresponding notification due to Segment AISRDI OAM failure.
catmPVclSegAISRDIRangeStatChEnd
1.3.6.1.4.1.9.10.97.1.15.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last PVCL in the range changed state in the last corresponding notification due to Segment AISRDI OAM failure.
This table lists the range of configured PVCs for which end AIS/RDI failure is detected and which are in the end AIS/RDI failed state. It also gives the information about the timestamp at which the the first and last end AIS/RDI failure is detected for the range of PVCs.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclEndAISRDILowerRangeValue
1.3.6.1.4.1.9.10.97.1.16.1.1
Unsigned32 (0..65536)
The first PVCL in a range of PVCLs for which the atmVclOperStatus to have changed in the last corresponding notification due to End AISRDI OAM failure.
catmPVclEndAISRDIHigherRngeValue
1.3.6.1.4.1.9.10.97.1.16.1.2
Unsigned32 (0..65536)
The last PVCL in a range of PVCLs for which the atmOperStatus to have changed in the last corresponding notification due to End AISRDI OAM failure.
catmPVclEndAISRDIRngeStatChStart
1.3.6.1.4.1.9.10.97.1.16.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first PVCL in the range changed state in the last corresponding notification due to End AISRDI OAM failure.
catmPVclEndAISRDIRangeStatChEnd
1.3.6.1.4.1.9.10.97.1.16.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last PVCL in the range changed state in the last corresponding notification due to End AISRDI OAM failure.
This table lists the range of configured PVCs for which segment AIS/RDI recovery is detected and which are in the segment AIS/RDI recovered state. It also gives the information about the timestamp at which the the first and last segment AIS/RDI recovery is detected for the range of PVCs.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclSegAISRDIUpLowerRangeVal
1.3.6.1.4.1.9.10.97.1.17.1.1
Unsigned32 (0..65536)
The first PVCL in a range of PVCLs for which the Segment AISRDI OAM recovery has been detected in the last corresponding notification .
catmPVclSegAISRDIUpHigherRngeVal
1.3.6.1.4.1.9.10.97.1.17.1.2
Unsigned32 (0..65536)
The last PVCL in a range of PVCLs for which the Segment AISRDI OAM recovery has been detected in the last corresponding notification .
catmPVclSegAISRDIRngeStatUpStart
1.3.6.1.4.1.9.10.97.1.17.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first Segment AISRDI OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
catmPVclSegAISRDIRangeStatUpEnd
1.3.6.1.4.1.9.10.97.1.17.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last Segment AISRDI OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
This table lists the range of configured PVCs for which end AIS/RDI recovery is detected and which are in the end AIS/RDI recovered state. It also gives the information about the timestamp at which the the first and last end AIS/RDI recovery is detected for the range of PVCs.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
AtmVpIdentifierThe VPI value for a VPL or VCL. The value VPI=0 is only allowed for a VCL. For ATM UNIs supporting VPCs the VPI value ranges from 0 to 255. The VPI value 0 is supported for ATM UNIs conforming to the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs) specification. For ATM UNIs supporting VCCs the VPI value ranges from 0 to 255. For ATM NNIs the VPI value ranges from 0 to 4095. The maximum VPI value cannot exceed the value allowable by atmInterfaceMaxVpiBits defined in ATM-MIB. (0..4095) · Integer32
The VPI value of the VCL.
catmPVclEndAISRDIUpLowerRangeVal
1.3.6.1.4.1.9.10.97.1.18.1.1
Unsigned32 (0..65536)
The first PVCL in a range of PVCLs for which the End AISRDI OAM recovery has been detected in the last corresponding notification .
catmPVclEndAISRDIUpHigherRngeVal
1.3.6.1.4.1.9.10.97.1.18.1.2
Unsigned32 (0..65536)
The last PVCL in a range of PVCLs for which the End AISRDI OAM recovery has been detected in the last corresponding notification .
catmPVclEndAISRDIRngeStatUpStart
1.3.6.1.4.1.9.10.97.1.18.1.3
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the first End AISRDI OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
catmPVclEndAISRDIRangeStatUpEnd
1.3.6.1.4.1.9.10.97.1.18.1.4
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be
defined in the description of any object defined using this type.
If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The time stamp at which the last End AISRDI OAM recovery is detected on any of the PVCLs in the range in the last corresponding notification .
Trap details
catmIntfPvcUpTrap
1.3.6.1.4.1.9.10.97.2.0.1
A notification indicating that one or more PVCLs on this interface has changed state back to 'up' since the last catmIntfPvcUpTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfCurrentlyDownToUpPVcls
1.3.6.1.4.1.9.10.97.1.1.1.1
Gauge32
The current number PVCLs on this interface which changed state to 'up' since the last atmIntPvcUp2Trap was sent.
catmIntfPvcOAMFailureTrap
1.3.6.1.4.1.9.10.97.2.0.2
A notification indicating that one or more PVCLs on this interface has OAM loop back failed since the last catmIntfPvcOAMFailuresTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.2
Gauge32
The total number of PVCLs in this interface which are currently in the OAM loopback failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurrentOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.3
Gauge32
The current number of PVCLs on this interface for which the OAM loop back has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfPvcSegCCOAMFailureTrap
1.3.6.1.4.1.9.10.97.2.0.3
A notification indicating that one or more PVCLs on this interface has Segment CC OAM failure since the last catmIntfPvcSegCCOAMFailureTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfSegCCOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.4
Gauge32
The total number of PVCLs in this interface which are currently in the Segment CC OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurSegCCOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.5
Gauge32
The current number of PVCLs on this interface for which the Segment CC OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfPvcEndCCOAMFailureTrap
1.3.6.1.4.1.9.10.97.2.0.4
A notification indicating that one or more PVCLs on this interface has End-to-End CC OAM failure since the last catmIntfPvcEndCCOAMFailureTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfEndCCOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.6
Gauge32
The total number of PVCLs in this interface which are currently in the End-to-End CC OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurEndCCOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.7
Gauge32
The current number of PVCLs on this interface for which the End-to-End CC OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfPvcAISRDIOAMFailureTrap
1.3.6.1.4.1.9.10.97.2.0.5
A notification indicating that one or more PVCLs on this interface has AIS RDI OAM failure since the last catmIntfPvcAISRDIOAMFailureTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfAISRDIOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.8
Gauge32
The total number of PVCLs in this interface which are currently in the AIS RDI OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurAISRDIOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.9
Gauge32
The current number of PVCLs on this interface for which the AIS RDI OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfPvcAnyOAMFailureTrap
1.3.6.1.4.1.9.10.97.2.0.6
A notification indicating that one or more PVCLs on this interface has one or more OAM failed since the last catmIntfPvcAnyOAMFailureTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfAnyOAMFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.10
Gauge32
The total number of PVCLs in this interface which are currently in any type of OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurAnyOAMFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.11
Gauge32
The current number of PVCLs on this interface for which any of OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfTypeOfOAMFailure
1.3.6.1.4.1.9.10.97.1.1.1.12
CatmOAMFailureType1 = catmLoopbackOAMFailure2 = catmSegmentCCOAMFailure4 = catmEndCCOAMFailure8 = catmAISRDIOAMFailure16 = catmSegAISRDIOAMFailure32 = catmEndAISRDIOAMFailureEnums to indicate different types of OAM recoveries .
catmLoopbackOAMFailure - The object in query is Loopback OAM
type of failure. catmSegmentCCOAMFailure - The object in query is Segment CC OAM type of failure.
catmEndCCOAMFailure - The object in query is End-to-End
CC OAM type of failure.
catmAISRDIOAMFailure - The object in query is AISRDI OAM
type of failure. catmSegAISRDIOAMFailure - The object in query is Segment AISRDI OAM type of failure. catmEndAISRDIOAMFailure - The object in query is End AISRDI OAM type of failure. · Integer32
Type of OAM failure.
catmIntfPvcOAMRecoverTrap
1.3.6.1.4.1.9.10.97.2.0.7
A notification indicating that one or more PVCLs on this interface has OAM loop back recovered since the last catmIntfPvcOAMRecoversTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.13
Gauge32
The total number of PVCLs in this interface which are currently in the OAM loopback recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurrentOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.14
Gauge32
The current number of PVCLs on this interface for which the OAM loop back has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfPvcSegCCOAMRecoverTrap
1.3.6.1.4.1.9.10.97.2.0.8
A notification indicating that one or more PVCLs on this interface has Segment CC OAM recovery since the last catmIntfPvcSegCCOAMRecoverTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfSegCCOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.15
Gauge32
The total number of PVCLs in this interface which are currently in the Segment CC OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurSegCCOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.16
Gauge32
The current number of PVCLs on this interface for which the Segment CC OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfPvcEndCCOAMRecoverTrap
1.3.6.1.4.1.9.10.97.2.0.9
A notification indicating that one or more PVCLs on this interface has End-to-End CC OAM recovery since the last catmIntfPvcEndCCOAMRecoverTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfEndCCOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.17
Gauge32
The total number of PVCLs in this interface which are currently in the End-to-End CC OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurEndCCOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.18
Gauge32
The current number of PVCLs on this interface for which the End-to-End CC OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfPvcAISRDIOAMRecoverTrap
1.3.6.1.4.1.9.10.97.2.0.10
A notification indicating that one or more PVCLs on this interface has AIS RDI OAM recovery since the last catmIntfPvcAISRDIOAMRecoverTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfAISRDIOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.19
Gauge32
The total number of PVCLs in this interface which are currently in the AIS RDI OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurAISRDIOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.20
Gauge32
The current number of PVCLs on this interface for which the AIS RDI OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfPvcAnyOAMRecoverTrap
1.3.6.1.4.1.9.10.97.2.0.11
A notification indicating that one or more PVCLs on this interface has one or more OAM recovered since the last catmIntfPvcAnyOAMRecoverTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfAnyOAMRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.21
Gauge32
The total number of PVCLs in this interface which are currently in any type of OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurAnyOAMRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.22
Gauge32
The current number of PVCLs on this interface for which any of OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfTypeOfOAMRecover
1.3.6.1.4.1.9.10.97.1.1.1.23
CatmOAMRecoveryType1 = catmLoopbackOAMRecover2 = catmSegmentCCOAMRecover4 = catmEndCCOAMRecover8 = catmAISRDIOAMRecover16 = catmSegAISRDIOAMRecover32 = catmEndAISRDIOAMRecoverEnums to indicate different types of OAM recoveries .
catmLoopbackOAMRecover - The object in query is Loopback OAM
type of recovery. catmSegmentCCOAMRecover - The object in query is Segment CC OAM type of recovery.
catmEndCCOAMRecover - The object in query is End-to-End
CC OAM type of recovery.
catmAISRDIOAMRecover - The object in query is AISRDI OAM
type of recovery. catmSegAISRDIOAMRecover - The object in query is Segment AISRDI OAM type of recovery. catmEndAISRDIOAMRecover - The object in query is End AISRDI OAM type of recovery. · Integer32
Type of OAM Recovered
catmIntfPvcUp2Trap
1.3.6.1.4.1.9.10.97.2.0.12
A notification indicating that one or more PVCLs on this interface has changed state back to 'up' since the last catmIntfPvcUp2Trap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfCurrentlyDownToUpPVcls
1.3.6.1.4.1.9.10.97.1.1.1.1
Gauge32
The current number PVCLs on this interface which changed state to 'up' since the last atmIntPvcUp2Trap was sent.
catmIntfPvcDownTrap
1.3.6.1.4.1.9.10.97.2.0.13
A notification indicating that one or more PVCLs on this interface has changed state back to 'down' since the last catmIntfPvcDownTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
atmIntfPvcFailures
1.3.6.1.4.1.9.10.29.1.14.1.20
Counter32
The number of times the operational status of a PVCL on this interface has gone down.
atmIntfCurrentlyFailingPVcls
1.3.6.1.4.1.9.10.29.1.14.1.22
Gauge32
The current number of VCLs on this interface for which there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and an atmVclOperStatus with a value other than `up'.
catmIntfPvcSegAISRDIFailureTrap
1.3.6.1.4.1.9.10.97.2.0.14
A notification indicating that one or more PVCLs on this interface has segment AIS/RDI OAM failure since the last catmIntfPvcSegAISRDIFailureTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfSegAISRDIFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.24
Gauge32
The total number of PVCLs in this interface which are currently in the Segment AIS RDI OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurSegAISRDIFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.25
Gauge32
The current number of PVCLs on this interface for which the Segment AIS RDI OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfPvcEndAISRDIFailureTrap
1.3.6.1.4.1.9.10.97.2.0.15
A notification indicating that one or more PVCLs on this interface has end AIS/RDI OAM failure since the last catmIntfPvcEndAISRDIFailureTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfEndAISRDIFailedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.26
Gauge32
The total number of PVCLs in this interface which are currently in the End AIS RDI OAM failed condition but the status of each PVCL remain in the 'up' state.
catmIntfCurEndAISRDIFailingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.27
Gauge32
The current number of PVCLs on this interface for which the End AIS RDI OAM has failed but the status of each PVCL remain in the 'up' state in the last notification interval.
catmIntfPvcSegAISRDIRecoverTrap
1.3.6.1.4.1.9.10.97.2.0.16
A notification indicating that one or more PVCLs on this interface has segment AIS/RDI OAM recovery since the last catmIntfPvcSegAISRDIRecoverTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfSegAISRDIRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.28
Gauge32
The total number of PVCLs in this interface which are currently in the Segment AIS RDI OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurSegAISRDIRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.29
Gauge32
The current number of PVCLs on this interface for which the Segment AIS RDI OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.
catmIntfPvcEndAISRDIRecoverTrap
1.3.6.1.4.1.9.10.97.2.0.17
A notification indicating that one or more PVCLs on this interface has end AIS/RDI OAM recovery since the last catmIntfPvcEndAISRDIRecoverTrap was sent.
ifIndex
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
catmIntfEndAISRDIRcovedPVcls
1.3.6.1.4.1.9.10.97.1.1.1.30
Gauge32
The total number of PVCLs on this interface which are currently in the End AIS RDI OAM recovered condition and the status of each PVCL is in the 'up' state.
catmIntfCurEndAISRDIRcovingPVcls
1.3.6.1.4.1.9.10.97.1.1.1.31
Gauge32
The current number of PVCLs on this interface for which the End AIS RDI OAM has recovered and the status of each PVCL is in the 'up' state in the last notification interval.