CISCO-ATM-TRAFFIC-MIB

INTEGER1 = cbr2 = vbrRt3 = vbrNrt4 = abr5 = ubr6 = notDef · Integer32

This objects indicates the Service Category specified by the Traffic Descriptor. If it is defined, the setting of this object determines the Service Category used for the connection. This then limits the possible Traffic Descriptor Types as follows: Explicit Service Category Type may only be ----------------------------------------- cbr atmNoClpNoScr. atmClpNoTaggingNoScr atmClpTaggingNoScr atmNoClpNoScrCdvt abr/ubr atmNoTrafficDescriptor atmNoClpNoScr. atmNoClpNoScrCdvt atmNoClpMcr -- ubr+/abr atmNoClpMcrCdvt -- ubr+/abr vbr atmNoClpScr atmClpNoTaggingScr atmClpTaggingScr atmClpScrMbsCdvt atmNoClpScrMbsCdvt ----------------------------------------- If the settings of Service Category and Traffic Descriptor Type are not compatible, the row can not be made active.

INTEGER1 = cbr2 = vbrRt3 = vbrNrt4 = abr5 = ubr · Integer32

This object indicates the Service Category derived from the Traffic Descriptor. If the object atmTrafficExplicitServCategory has a defined value, then this object mirrors that value. If Explicit Service Category has the value notDef, then this object reflects the Service Category derived from the Traffic Descriptor Type as follows: Traffic Descriptor Service Type Category ----------------------------------------- atmNoTrafficDescriptor ubr atmNoClpMcr abr atmNoClpMcrCdvt abr atmNoClpNoScr --| atmClpNoTaggingNoScr |-- cbr atmClpTaggingNoScr | atmNoClpNoScrCdvt --| atmNoClpScr --| atmClpNoTaggingScr |-- vbr-rt atmClpScrMbsCdvt | atmNoClpScrMbsCdvt | atmClpTaggingScr --| -----------------------------------------

SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t

A human readable string that contains the unique name of this Traffic Descriptor. This object will return a zero-length string if value is not set.