2019-06-11
The cisco catalyst 6000 Nat stat mib provides information about NAT platform specific statistics in the system
Download CISCO-CAT6k-NAT-STAT-MIB.txt Open CISCO-CAT6k-NAT-STAT-MIB.txt in a new tab
END OF TOC
1.3.6.1.4.1.9.9.861.1.2.1
NatType1 = static2 = dynamic3 = mixed4 = otherType of NAT · Integer32
NAT type can be Static, Dynamic, Mixed and other. Static should be displayed when static rules are hit. Dynamic should be displayed when dynamic rules are hit. If traffic hits rmap/pat rules, it should display as Other.
1.3.6.1.4.1.9.9.861.1.2.2
NetFlowType1 = layer32 = mixedType of Netflow · Integer32
Netflow type will be Layer-3 or Mixed. If the rules are hit based only on Layer 3 information, it should display as Layer-3.For static/dynamic nat it is L3,rmap and Pat uses L4 info and it is considered as Mixed.
1.3.6.1.4.1.9.9.861.1.2.3
NatBool0 = disabled1 = enabledBoolean type in this mib · Integer32
This object shows whether ip nat create flow config is enabled or not. By default it will be in enabled state only.
1.3.6.1.4.1.9.9.861.1.2.4
OCTET STRING
This object gives total utilization of dynamic NAT entries present in the system.
1.3.6.1.4.1.9.9.861.1.2.5
OCTET STRING
This object gives total utilization of static NAT entries present in the system.
1.3.6.1.4.1.9.9.861.1.2.6
OCTET STRING
This object gives total utilization of other NAT (PAT,RMAP,Etc.) entries present in the system.
1.3.6.1.4.1.9.9.861.1.2.7
Counter32
This object gives consolidated count of static as well as dynamic entries present in the system.
1.3.6.1.4.1.9.9.861.1.2.8
OCTET STRING
Total system resource used by the system