CISCO-CDMA-PDSN-MIB

Gauge32

The total number of sessions currently established with this system.

Unsigned32

The maximum number of sessions allowed by this system.

Gauge32

The total number of PCF currently interacting with this system.

Unsigned32

The maximum number of PCF allowed by this system.

Gauge32

The total number of flows currently using simple IP service.

Gauge32

The total number of flows currently using MoIP services.

Gauge32

The total number of flows currently using proxy MoIP service.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11 interface.

The number of A10/A11 session failures occurring since PDSN agent restarted. sysUpTime can be polled to determine if the agent has been restarted.

SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..32) · OCTET STRING · hint 255t

Hostname of the serving PDSN.

TimeTicks

Timer (measured in hundredths of a second) for MoIP users not using PPP authentication. After PPP session establishment, the session will be terminated if the MoIP user is not authenticated via MoIP for a period longer than this timer.

Unsigned32 (0..2000)

Maximum number of entries in the user failure information table.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

'true' indicates failure notification will be sent out when the maximum number of sessions has been reached.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

'true' indicates failure notification will be sent out when the maximum number of interconnected PCF has been reached.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

'true' indicates failure notification will be sent out when invalid arguments are received from PCF leading to session termination.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

'true' indicates failure notification will be sent out when registration request fails termination.

SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t

CISCO PDSN Release Version, example output: 1.1.

CCdmaSystemStatus0 = unknown1 = up2 = down3 = testing4 = insufficientResourcesPDSN operational status. The valid value are: - 'unknown' indicates status is unknown. - 'up' indicates system is up and providing service. - 'down' indicates system is down and not providing service. - 'testing' indicates system is up, but is in testing state, call can only be made through CLI, not through regular through A11/A10 interface. - 'insufficientResources' indicates system is up and runs out of system resource. · Integer32

PDSN subsystem operational status.

Gauge32

The total number of sessions in active state.

Gauge32

The total number of sessions in dormant state.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

An indication of whether session redundancy feature is enabled.

Gauge32

The total number of PPPoGRE sessions currently established with this system.

Gauge32

The total number of HDLCoGRE sessions currently established with this system.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

The total number of sessions established since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

The total number of sessions released since system was last restarted

Gauge32

The total number of flows currently using MSID service.

Gauge32

The total number of flows currently using VPDN service.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

The number of valid Registration Requests Received since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

The number of registration replies accepted since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

The number of valid registration requests received with life time zero since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

The number of valid registration requests with life time zero accepted since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because PCF address not in PDSN's list of configured PCFs for unspecified reason since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because PCF address is not in PDSN's list of configured PCFs since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of insufficient resources since the system was last restarted. Factors causing insufficient resources may be due to the max number of PCFs, the max number of sessions reached, or exhaustion of other system resources.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed due to MN authentication failure since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of identification mismatch since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of badly formed request since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of unknown Home Agent Address since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: RFC-2344.

The number of registration requests failed because FA to HA tunnel setup failed since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because Reverse Tunnel bit Not set since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of unsupported vendor codes in CVSE since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

The number of valid update registration requests received since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

The number of valid update registration replies accepted since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of update registrations failed for unspecified reason since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of update registrations failed due to administrative prohibition since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of update registrations failed due to MN authentication failure since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registrations failed due to registration identity mismatch since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of update registrations failed due to poorly formed request since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of A11 Registration Requests received since the system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of A11 Registration Requests accepted since the system was last restarted. The Code field in the corresponding Registration Reply message, is set to zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of A11 Registration Requests denied since the system was last restarted. The Code field in the corresponding Registration Reply message is set to non-zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of A11 Registration Requests silently discarded since the system was last restarted. A corresponding Registration Reply message is not returned for these A11 Registration Requests.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of accepted A11 Registration Requests meant for establishing new R-P connections or Registration Requests with GRE key different from that of already existing session, since the system was last restarted. These A11 Registration Requests contain the Connection Setup Airlink Record. The Code field in the corresponding Registration Reply message is set to zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of denied A11 Registration Requests meant for establishing new R-P connections or Registration Requests with GRE key different from that of already existing session, since the system was last restarted. These A11 Registration Requests contain the Connection Setup Airlink Record. The Code field in the corresponding Registration Reply message is set to zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of accepted A11 Registration Requests meant for refreshing the already established R-P connections, since the system was last restarted. The Code field in the corresponding Registration Reply message is set to zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of denied A11 Registration Requests meant for refreshing the already established R-P connections, since the system was last restarted. The Code field in the corresponding Registration Reply message is set to non-zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of accepted A11 Registration Requests meant for de-establishing the already established R-P connections, since the system was last restarted. The Code field in the corresponding Registration Reply message is set to zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of denied A11 Registration Requests meant for de-establishing the already established R-P connections, since the system was last restarted. The Code field in the corresponding Registration Reply message is set to non-zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because PCF address not in PDSN's list of configured PCFs for unspecified reason since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because PCF address is not in PDSN's list of configured PCFs since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because max number of PCFs or max number of sessions reached or out of system resources since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed due to MN authentication failure since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of identification mismatch since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of badly formed request since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of unknown PDSN/HA Address since system was last restarted.

Counter32

Reference: RFC-2344.

The number of registration requests failed because FA to HA reverse tunnel setup failed since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because reverse tunnel is required, but T bit is not set since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because of unsupported vendor codes in CVSE since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registration requests failed because PCF address not in PDSN's list of configured PCFs for unspecified reason since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

Total number of accepted A11 Registration Requests meant for de-establishing the already established R-P connections with the PCF from which the MN was handed off, since the system was last restarted. The Code field in the corresponding Registration Reply message is set to zero.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of denied A11 Registration Requests meant for de-establishing the already established R-P connections with the PCF from which the MN was handed off, since the system was last restarted. The Code field in the corresponding Registration Reply message is set to non-zero.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of Initial A11 Registration requests received since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of Initial A11 Registration requests silently discarded since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of A11 Re-Registration requests received since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of A11 Re-Registration requests silently discarded since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of A11 De-Registration requests received since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of A11 De-Registration requests silently discarded since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of A11 Handoff Registration requests received since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of accepted handoff A11 Registration Requests meant for already existing session, since the system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10/A11(R-P) interface.

Total number of denied handoff A11 Registration Requests meant for already existing session, since the system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of handoff A11 Registration requests silently discarded since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of A11 Re-Registration requests containing Airlink Start since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of A11 Re-Registration requests containing Airlink Stop since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of A11 De-Registration requests containing Airlink Stop since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of Inter PCF active handoff since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of Inter PCF dormant handoff since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Registration Updates transmitted since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Registration Acknowledgements received with the Status field set to zero (indicating that the corresponding Registration Update was accepted), since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Registration Acknowledgements received with the Status field set to non-zero indicating that the corresponding Registration Update was denied, since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Registration Updates sent, for which no corresponding A11 Registration Acknowledgements received, since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of initial A11 Registration Updates sent, excluding the re-transmitted A11 Registration Updates, since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of re-transmitted A11 Registration Updates, since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Registration Acknowledgements received, since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Registration Acknowledgements discarded, since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of initial A11 Registration Updates sent due to RP lifetime expiry since system was last restarted. Note that this count does not include any retransmissions.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of initial A11 Registration Updates sent as a result of PPP termination, since system was last restarted. Note that this count does not include any retransmissions.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of initial A11 Registration Updates sent due to reasons other than RP lifetime expiry, or PPP termination, since system was last restarted. Note that this count does not include any retransmissions.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of update registrations failed for unspecified reason since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of update registrations failed due to administrative prohibition since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of update registrations failed due to MN authentication failure since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of registrations failed due to registration identity mismatch since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of update registrations failed due to poorly formed request since system was last restarted.

Counter32

The number of update registrations sent as a result of inter pcf handoffs, since system was last restarted.

Counter32

Total number of A11 Registration Updates (sent as the result of inter PCF handoffs), for which no corresponding A11 Registration Acknowledgements received, since system was last restarted.

Counter32

Total number of A11 Registration Acknowledgements received for the A11 Registration Updates sent as the result of inter PCF handoffs, since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Registration Acknowledgements received with the Status field set to zero (indicating that the corresponding Registration Update was accepted), since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Registration Acknowledgements received with the Status field set to non-zero indicating that the corresponding Registration Update was denied, since system was last restarted.

Counter32

Total number of A11 Registration Acknowledgements discarded, since system was last restarted.

Counter32

Total number of initial A11 Registration Updates sent as the result of inter PCF handoffs, excluding the re-transmitted A11 Registration Updates, since system was last restarted.

Counter32

Total number of re-transmitted A11 Registration Updates as the initial Registration Update (sent as a result of inter PCF handoffs) was not acked or denied, since system was last restarted.

Counter32

The number of update registrations failed for unspecified reason since system was last restarted. The update is sent as a result of inter PCF handoff.

Counter32

The number of update registrations failed due to administrative prohibition since system was last restarted. The update is sent as a result of inter PCF handoff.

Counter32

The number of update registrations failed due to MN authentication failure since system was last restarted. The update is sent as a result of inter PCF handoff.

Counter32

The number of registrations failed due to registration identity mismatch since system was last restarted. The update is sent as a result of inter PCF handoff.

Counter32

The number of update registrations failed due to poorly formed request since system was last restarted. The update is sent as a result of inter PCF handoff.

Gauge32

Reference: Refer to PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of currently active PPP connections

Counter32

Reference: Refer to PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection initiate requests sent out since system was last restarted.

Counter32

Reference: Refer to PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that have been successfully brought to active state since system was last restarted.

Counter32

Reference: Refer to PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

The number of PPP connection setup request failed since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection request that failed at LCP stage since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP Setup connections that failed at authentication stage since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP Setup connections that failed at IPCP stage since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections entering LCP stage since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections entering authentication stage since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections entering IPCP stage since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection requests that failed at LCP stage after max number of retransmissions since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection requests that failed at LCP stage due to an unknown reason since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection request that failed at IPCP stage after max number of retransmissions since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection requests that failed at IPCP stage due to an unknown reason since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations terminated prematurely due to reasons such as MN poweroff since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections terminated due to LCP options negotiation failure such as call back user not negotiating the call back option.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections terminated due to IPCP options negotiation failure such as ip address negotiation.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection requests that failed at authentication stage after max number of retransmissions since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released because MN has no ip address as it rejects the IP address allocated by PDSN.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections terminated because the lower layer such as RP is disconnected.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations terminated due to PPP receiving term request during the IPCP phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations terminated due to PPP sending term request during the IPCP phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations terminated due to PPP receiving term request during the authentication phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations terminated due to PPP sending term request during the authentication phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations terminated due to PPP receiving term request during the LCP phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations terminated due to PPP sending term request during the LCP phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of A10 connections released by PDSN before the PPP enters LCP negotiation phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of A10 connections released by PCF before the PPP enters LCP negotiation phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of A10 connections released by PDSN during the LCP negotiation phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of A10 connections released by PCF during the LCP negotiation phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of A10 connections released by PDSN during the PPP authentication phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of A10 connections released by PCF during the PPP authentication phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of A10 connections released by PDSN during the IPCP negotiation phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of A10 connections released by PCF during the IPCP negotiation phase.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that entered LCP stage successfully.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that entered IPCP stage successfully.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that succeeded authentication.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations terminated due to miscellaneous reasons.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections renegotiated by either PDSN or mobile node since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection renegotiation requests initiated by PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection renegotiations requests initiated by mobile node since system was last restarted.

Counter32

Reference: Refer to PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total Number of PPP connection renegotiate request sent during setup (LCP and IPCP stages) since PDSN was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections renegotiated due to ip address mismatch since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections renegotiated due to reasons other than IP address mismatch since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP re-negotiations that have been successfully brought to active state since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP re-negotiations failed since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP re-negotiations terminated prematurely due to reasons such as MN poweroff etc.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections renegotiated due to access-network id(anid) change during session handoff.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP CHAP authentication requests sent out since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP CHAP authentication successes since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP CHAP authentication failures since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP PAP authentication requests sent out since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP PAP authentication successes since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP PAP authentication failures since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP MSCHAP authentication requests sent out since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP MSCHAP authentication successes since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP MSCHAP authentication failures since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP EAP authentication requests sent out since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP EAP authentication successes since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP EAP authentication failures since system was last restarted.

Counter32

Total number of PPP MSID authentication requests tried since system was last restarted.

Counter32

Total number of PPP MSID authentication successes since system was last restarted.

Counter32

Total number of PPP MSID authentication failures since system was last restarted.

Counter32

Total number of PPP authentication failures due to AAA timeouts, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Total number of PPP CHAP authentication timeouts as MN does not respond to CHAP request, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Total number of PPP PAP authentication timeouts as MN does not send PAP request, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Total number of PPP MSCHAP authentication timeouts as MN does not respond to MSCHAP request, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Total number of PPP negotiations that skipped PPP authentication, since system was last restarted.

Counter32

Reference: Refer to PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of active PPP connections released by either PDSN or mobile node since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of active PPP connection release request initiated by the PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of active PPP connection release request initiated by mobile node since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connection release due to ingress address filering since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released due to administrative command since system was last restarted

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released due to LCP Term REQ since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released because of PPP idle timeout since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released due to L2TP tunnel release since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released due to insufficient resources since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released due to session timeout since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released due to service interruption since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released due to service unavailable since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released as peer did not send echo reply to echo requests since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released as pcf sends deregistration request since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released as the session lifetime expires, since the system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections released due to unknown reasons since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that negotiated compression since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that use Microsoft compression since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that use Ascend compression since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that use stack compression since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that use deflate compression since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that use compression type other than above since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that have negotiated MRRU since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that have negotiated IPX protocol since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that have negotiated IP protocol since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that have negotiated header VJ-Compression since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979, 2125, 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP connections that negotiated BAP (Bandwidth Allocation protocol, RFC 2125) since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP bundles formed since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP negotiations that failed due to compression negotiation failure, since the system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of LCP Echo requests transmitted, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of LCP Echo requests retransmitted, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of LCP Echo reply received, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of LCP Echo requests timed out, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of packets discarded at PPP stack due to protocol value can not be identified, since the system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A11/A10 interface and PPP related RFC 1661, 1662, 1332, 1570, 1979 1962,1990, 1974, 2509, 2661, 2716, 2284, 2118, 1994

Total number of PPP packets discarded stack due to bad length, since the system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of simple IP data octets (in unit of 1024 octets) sent to mobile stations from PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of simple IP data octets (in unit of 1024 octets) received from mobile stations by PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of simple IP data packets sent to mobile stations since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of simple IP data packets received from mobile stations since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of mobile IP data octets (in unit of 1024 octets) sent to mobile stations from PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of mobile IP data octets (in unit of 1024 octets) received from mobile stations by PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of mobile IP data packets sent to mobile stations from PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of mobile IP data packets received from mobile stations since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of proxy mobile IP data octets (in unit of 1024 octets) sent to mobile stations from PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of proxy mobile IP data octets (in unit of 1024 octets) received from mobile stations since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of proxy mobile IP data packets sent to mobile stations from PDSN since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of proxy mobile IP data packets received from mobile stations by PDSN since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of SDB marked data packets sent to PCF from PDSN since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of SDB marked data data octets sent to PCF from PDSN since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of packets discarded from PCF because GRE Key is missing since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of packets discarded from PCF because session is not found since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of packets discarded from PCF because GRE protocol is invalid since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of packets discarded from PCF because of invalid checksum since system was last restarted.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for simple IP service.

Total number of Simple IP flow that has been established successfully since system reboot.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for mobile IP service.

Total number of mobile IP flow that has been established successfully since system reboot.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of proxy mobile IP flow that has been established successfully since system reboot.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model and CISCO PDSN release note.

Total number of VPDN flow that has been established successfully since system reboot.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.

Total number of simple IP flow setup request failed since last system reboot.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.

Total number of mobile IP flow setup request failed since last system reboot.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.

Total number of proxy mobile IP flow setup request failed since last system reboot.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.

Total number of VPDN flow setup request failed since last system reboot.

Counter32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.

Total number of unknown type flow setup request failed since last system reboot.

Counter32

Reference: Refer to 3GPP2 IOS 4.1 for description of defined service options.

Total number of service options supported by this PDSN.

Counter32

Reference: Refer to 3GPP2 IOS 4.1 for details.

Total number of inter PCF handoffs since system last restart.

Counter32

Reference: Refer to 3GPP2 IOS 4.1 for details.

Total number of inter PDSN handoffs since system last restart.

Counter32

Reference: Refer to 3GPP2 IOS 4.1 for details.

Total number of handoffs due to CANID/PANID change since system last restart.

Counter32

Total number of status changes from IS to OOS.

Counter32

Total number of status changes from OOS to IS.

Counter32

Total number of simple IP calls which negotiated static IP addresses.

Counter32

Total number of simple IP calls which negotiated dynamic IP addresses.

Counter32

Total number of mobile IP calls which negotiated static IP addresses.

Counter32

Total number of mobile IP calls which negotiated dynamic IP addresses.

Counter32

Total number of proxy mobile IP calls which negotiated static IP addresses.

Counter32

Total number of proxy mobile IP calls which negotiated dynamic IP addresses.

Counter32

Total number of VPDN calls which negotiated static IP addresses.

Counter32

Total number of VPDN calls which negotiated dynamic IP addresses.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Session Updates transmitted since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Session Update Acknowledgements received with the Status field set to zero (indicating that the corresponding Registration Update was accepted), since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Session Update Acknowledgements received with the Status field set to non-zero indicating that the corresponding Registration Update was denied, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Session Update Updates sent, for which no corresponding A11 Registration Acknowledgements received, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of initial A11 Session Updates sent, excluding the re-transmitted A11 Registration Updates, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of re-transmitted A11 Session Updates, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Session Update Acknowledgements received, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of A11 Session Update Acknowledgements discarded, since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of initial A11 Session Updates sent due to Always On since system was last restarted. Note that this count does not include any retransmissions.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for A10 session update message and TR 45.6 for Accounting Model.

Total number of initial A11 Registration Updates sent due to RNPDIT value downloaded, since system was last restarted. Note that this count does not include any retransmissions.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of session update registrations failed for unspecified reason since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of session update registrations failed for session parameters not updated reason since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of session update registrations failed due to MN authentication failure since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of session update registrations failed due to registration identity mismatch since system was last restarted.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Reference: Refer to TIA/EIA international telecommunications organization standard TR 45.4 for details about A10 session setup errors.

The number of session update registrations failed due to poorly formed request since system was last restarted.

Unsigned32

A threshold marking the high number of allowed sessions. Agent generates a notification when this threshold is reached during call setup.

Unsigned32

A threshold marking the low number of allowed sessions. Agent generates a notification when this threshold is reached during call release.

INTEGER0 = nonCluster1 = peerToPeer2 = controllerMember · Integer32

The type of this PDSN cluster. - 'nonCluster' indicates cluster is not provisioned. - 'peerToPeer' indicates cluster type is peer-to- peer. - 'controllerMember' indicates cluster type is controller-member type.

INTEGER0 = notApply1 = controller2 = member3 = collocated · Integer32

The role this PDSN plays within a controller-member type of cluster: - 'notApply' indicates this PDSN does not play any cluster role. PDSN has this role if the cCdmaClusterType is not controller-member. - 'controller' indicates this PDSN is the controller of this cluster. - 'member' indicates this PDSN is a member of this cluster. - 'collocated' indicates this PDSN is both controller and a member of this cluster.

Gauge32

The total number of cluster controllers within this cluster.

Gauge32

The total number of session records in PDSN cluster controller.

Unsigned32

A threshold marking the high number of allowed sessions within a PDSN cluster controller. Notification will be generated when this threshold is reached during call setup.

Unsigned32

A threshold marking the low number of allowed sessions within a PDSN cluster controller. Notification will be generated when this threshold is reached during call release.

Gauge32

The total number of member records in PDSN cluster controller.

CCdmaServiceAffectedLevel1 = warning2 = minor3 = major4 = criticalCDMA severity level of affected service: - 'warning' indicates something is abnormal, but service is not affected. - 'minor' indicates service has been slightly affected. - 'major' indicates service has been severely affected. - 'critical' indicates service can not be provided anymore. · Integer32

This is the configured service affected level. Agent generates notifications only if such notifications' service affected level is higher than this value.

CCdmaServiceAffectedLevel1 = warning2 = minor3 = major4 = criticalCDMA severity level of affected service: - 'warning' indicates something is abnormal, but service is not affected. - 'minor' indicates service has been slightly affected. - 'major' indicates service has been severely affected. - 'critical' indicates service can not be provided anymore. · Integer32

This is the severity level of affected service by this event/condition that causes this notification.

InetAddressType0 = unknown1 = ipv42 = ipv63 = ipv4z4 = ipv6z16 = dnsA value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address that is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Each definition of a concrete InetAddressType value must be accompanied by a definition of a textual convention for use with that InetAddressType. To support future extensions, the InetAddressType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that InetAddressType objects and any dependent objects (e.g., InetAddress objects) are consistent. An inconsistentValue error must be generated if an attempt to change an InetAddressType object would, for example, lead to an undefined InetAddress value. In particular, InetAddressType/InetAddress pairs must be changed together if the address type changes (e.g., from ipv6(2) to ipv4(1)). · Integer32

This is the IP address type of affected device that generates this notification.

InetAddressDenotes a generic Internet address. An InetAddress value is always interpreted within the context of an InetAddressType value. Every usage of the InetAddress textual convention is required to specify the InetAddressType object that provides the context. It is suggested that the InetAddressType object be logically registered before the object(s) that use the InetAddress textual convention, if they appear in the same logical row. The value of an InetAddress object must always be consistent with the value of the associated InetAddressType object. Attempts to set an InetAddress object to a value inconsistent with the associated InetAddressType must fail with an inconsistentValue error. When this textual convention is used as the syntax of an index object, there may be issues with the limit of 128 sub-identifiers specified in SMIv2, STD 58. In this case, the object definition MUST include a 'SIZE' clause to limit the number of potential instance sub-identifiers; otherwise the applicable constraints MUST be stated in the appropriate conceptual row DESCRIPTION clauses, or in the surrounding documentation if there is no single DESCRIPTION clause that is appropriate. SIZE (0..255) · OCTET STRING

This is the IP address of affected device that generates this notification.

INTEGER1 = ready2 = adminProhibit · Integer32

The operational status of affected member PDSN.

INTEGER1 = configured2 = alive · Integer32

The operational status of the affected cluster controller.

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Registration request packet length while parsing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Protocol value in the Registration Request Session Specific Extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Flags value in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Authentication key in the Registration Request Mobile-Home Authentication extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Mismatch in SPI in the Registration Request Mobile-Home Authentication extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid SPI in the Registration Request Mobile-Home Authentication extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Connection ID in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MN ID in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MN ID type in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MSID length in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Session Specific extension missing in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Mobile-Home Authentication extension missing in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid order of the extensions in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Vendor specific extensions in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Application type in Vendor specific extensions in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Duplicate Application type in Vendor specific extensions in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Sub Application type in Vendor specific extensions in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Vendor ID in Vendor specific extensions in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Duplicate Critical Vendor extension in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Unknown Accounting attribute in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid accounting attribute length in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Duplicate accounting attribute received in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Same accounting sequence number and record type in the Registration Requests airlink record not updated since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid sequence number in the airlink accounting record Registration Requests siliently discarded since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Duplicate GRE Key received in the Registration Request for different MSID from the same PCF since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Same GRE Key and Airlink setup received in the Registration Request for existing session since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

GRE changed without airlink setup received in the Registration Request for existing session since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Airlink Setup record not received in the Initial Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Airlink Start record received before the Airlink setup in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Airlink Start record received in the De-Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Airlink Start record received in the Registration Request for already active session since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Airlink Stop record received in the Registration Request for already dormant session since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Airlink Stop record received in the Initial Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Airlink SDB received in the Initial Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Accounting Airlink record type in the Registration Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

De-Registration Requests denied for non existing sessions since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Re-Registration Request received for the session in the disconnecting or deleting state, therefore the registration request is discarded since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration Request discarded due to memory allocation failure during processing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration request rejected because of maximum limit or configured number of session reached since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Registration Update Ack packet length while parsing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Protocol value in the Registration Update Ack Session Specific Extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Authentication key in the Registration Update Ack Registration Update Authentication extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid SPI in the Registration Update Ack Registration Update Authentication extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Connection ID in the Registration Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MN ID in the Registration Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MN ID type in the Registration Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MSID length in the Registration Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Session Specific extension missing in the Registration Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration Update Authentication extension missing in the Registration Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid order of the extensions in the Registration Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Vendor specific extensions in the Registration Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration Update Ack is discarded since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration Update Ack discarded due to memory allocation failure during processing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Session Update Ack packet length while parsing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Protocol value in the Session Update Ack Session Specific Extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Authentication key in the Session Update Ack Registration Update Authentication extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid SPI in the Session Update Ack Session Update Authentication extension since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Connection ID in the Session Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MN ID in the Session Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MN ID type in the Session Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid MSID length in the Session Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Session Specific extension missing in the Session Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Session Update Authentication extension missing in the Session Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid order of the extensions in the Session Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Invalid Vendor specific extensions in the Session Update Ack since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Session Update Ack is discarded since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Session Update Ack discarded due to memory allocation failure during processing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration reply not sent due to internal error during processing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration reply not sent due to memory allocation failure during processing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Cannot send Reply to PCF because security association not found for the PCF or Parse error of Request since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration update not sent due to internal error during processing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Registration update not sent due to memory allocation failure during processing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Session update not sent due to internal error during processing since system was last restarted

ZeroBasedCounter32This TC describes an object that counts events with the following semantics: objects of this type will be set to zero(0) on creation and will thereafter count appropriate events, wrapping back to zero(0) when the value 2^32 is reached. Provided that an application discovers the new object within the minimum time to wrap, it can use the initial value as a delta since it last polled the table of which this object is part. It is important for a management station to be aware of this minimum time and the actual time between polls, and to discard data if the actual time is too long or there is no defined minimum time. Typically, this TC is used in tables where the INDEX space is constantly changing and/or the TimeFilter mechanism is in use. · Gauge32

Session update not sent due to memory allocation failure during processing since system was last restarted