ciscoDlrRingIndex
1.3.6.1.4.1.9.9.865.1.1.1.1
Unsigned32
The index of the entry
CISCO-DLR-MIB
2019-09-11
The CISCO-DLR-MIB is used to monitor the Device Level Ring (DLR) and notifying their state change. The Device Level Ring Protocol (DLR) is a redundancy protocol for EtherNet/IP and operates on OSI Layer 2. It can detect bus faults in a single line topology compensated by activating a redundant communication path. Thus DLR allows to build fast recovering and redundant network topologies that do not influence the controlling applications
Download CISCO-DLR-MIB.txt Open CISCO-DLR-MIB.txt in a new tab
Tables (1)
| Name | OID |
|---|---|
| ciscoDlrRingTable | 1.3.6.1.4.1.9.9.865.1.1 |
Traps (3)
| Name | OID |
|---|---|
| ciscoDlrRingStatus | 1.3.6.1.4.1.9.9.865.0.1 |
| ciscoDlrRingSupervisorStatus | 1.3.6.1.4.1.9.9.865.0.2 |
| ciscoDlrRingGatewayStatus | 1.3.6.1.4.1.9.9.865.0.3 |
END OF TOC
Table details
ciscoDlrRingTable
1.3.6.1.4.1.9.9.865.1.1
Index: ciscoDlrRingIndex
This table contains one row per each Device Level redundancy ring configured on the device.
ciscoDlrRingID
1.3.6.1.4.1.9.9.865.1.1.1.2
Unsigned32
A ring identifier of a DLR ring.
ciscoDlrRingName
1.3.6.1.4.1.9.9.865.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual description of DLR ring. This object should contain a string which identifies the dlr ring name.
ciscoDlrRingNetworkStatus
1.3.6.1.4.1.9.9.865.1.1.1.4
DlrNetworkStatus0 = undefined1 = ringNormal2 = ringFault3 = ringUnexcpectedLoop4 = ringPartialFault5 = ringRapidFaultRestoreOperational status of the DLR ring. undefined(0) Value is not valid. ringNormal(1) DLR ring is in normal state. ringFault(2) DLR ring is in fault state. ringUnexcpectedLoop(3) DLR ring is in unexpected loop. ringPartialFault(4) DLR ring is in partial fault state. ringRapidFaultRestore(5) DLR ring is in rapid fault restore cycle state.Reference: Dlr ring network status · Integer32
Operational status of the DLR network. The different opertions status of are defined as part of DlrNetworkStatus.
ciscoDlrRingDeviceState
1.3.6.1.4.1.9.9.865.1.1.1.5
DlrDeviceState0 = undefined1 = supBackup2 = supActive3 = normalRing4 = nonDlrOperational status of the DLR Device. undefined(0) Value is not valid. supBackup(1) DLR device is in Supervisor backup state. supActive(2) DLR device is in Supervisor active state. normalRing(3) DLR device is a normal ring device. nonDlr(4) Device is a non DLR device.Reference: Dlr ring device status · Integer32
Operational status of the DLR Device. The different opertional state of the device is defined as part of DlrDeviceState.
ciscoDlrRingGatewayDeviceStatus
1.3.6.1.4.1.9.9.865.1.1.1.6
DlrGatewayDeviceStatus0 = undefined1 = nonGateway2 = activeGateway3 = backupGateway4 = faultGateway5 = nonSupportedGateway6 = partialFaultGatewayOperational status of the DLR ring. undefined(0) Value is not valid. nonGateway(1) Not a Gateway device. activeGateway(2) Device is a active gateway. backupGateway(3) Device is a backup gateway. faultGateway(4) Device is an fault gateway state. nonSupportedGateway(5) Device donot support gateway. partialFaultGateway(6) Device is a partial fault gateway.Reference: Dlr ring gateway device status · Integer32
Operational status of the DLR Gateway Device. The different operational staus of the gateway device are defined as part of DlrGatewayStatus.
ciscoDlrRingGatewayDeviceState
1.3.6.1.4.1.9.9.865.1.1.1.7
DlrGatewayDeviceState0 = undefined1 = gatewayIdle2 = activeListen3 = activeNormal4 = fault5 = backupNormal6 = lossUplink7 = partialNetworkfaultOperational status of the DLR Device. undefined(0) Value is not valid. gatewayIdle(1) DLR gateway device is in idle state. activeListen(2) DLR gateway device is in active listen state. activeNormal(3) DLR gateway device is in active normal state. fault(4) DLR gateway device is in fault state. backupNormal(5) DLR gateway device is in backup normal state. lossUplink(6) DLR gateway device is lost up link. partialNetworkfault(7) DLR gateway device partial network fault stateReference: Dlr ring gateway device state · Integer32
Operational state of the DLR Gateway Device. The different opertional state are defined as part of DlrGatewayState.
Trap details
ciscoDlrRingStatus
1.3.6.1.4.1.9.9.865.0.1
A ciscoDlrRingSatus notification is generated when the value of ciscoDlrRingNetworkStatus is changed to Normal or Fault. The notification contains information of ciscoDlrRingID, ciscoDlrRingName, ciscoDlrNetworkStatus.
ciscoDlrRingID
1.3.6.1.4.1.9.9.865.1.1.1.2
Unsigned32
A ring identifier of a DLR ring.
ciscoDlrRingName
1.3.6.1.4.1.9.9.865.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual description of DLR ring. This object should contain a string which identifies the dlr ring name.
ciscoDlrRingNetworkStatus
1.3.6.1.4.1.9.9.865.1.1.1.4
DlrNetworkStatus0 = undefined1 = ringNormal2 = ringFault3 = ringUnexcpectedLoop4 = ringPartialFault5 = ringRapidFaultRestoreOperational status of the DLR ring. undefined(0) Value is not valid. ringNormal(1) DLR ring is in normal state. ringFault(2) DLR ring is in fault state. ringUnexcpectedLoop(3) DLR ring is in unexpected loop. ringPartialFault(4) DLR ring is in partial fault state. ringRapidFaultRestore(5) DLR ring is in rapid fault restore cycle state.Reference: Dlr ring network status · Integer32
Operational status of the DLR network. The different opertions status of are defined as part of DlrNetworkStatus.
ciscoDlrRingSupervisorStatus
1.3.6.1.4.1.9.9.865.0.2
A ciscoDlrRingSupervisorSatus notification is generated when the value of ciscoDlrRingDeviceState is changed to ACTIVE or BACKUP. The notification contains ciscoDlrRingID, ciscoDlrRingName, ciscoDlrDeviceStatus.
ciscoDlrRingID
1.3.6.1.4.1.9.9.865.1.1.1.2
Unsigned32
A ring identifier of a DLR ring.
ciscoDlrRingName
1.3.6.1.4.1.9.9.865.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual description of DLR ring. This object should contain a string which identifies the dlr ring name.
ciscoDlrRingDeviceState
1.3.6.1.4.1.9.9.865.1.1.1.5
DlrDeviceState0 = undefined1 = supBackup2 = supActive3 = normalRing4 = nonDlrOperational status of the DLR Device. undefined(0) Value is not valid. supBackup(1) DLR device is in Supervisor backup state. supActive(2) DLR device is in Supervisor active state. normalRing(3) DLR device is a normal ring device. nonDlr(4) Device is a non DLR device.Reference: Dlr ring device status · Integer32
Operational status of the DLR Device. The different opertional state of the device is defined as part of DlrDeviceState.
ciscoDlrRingGatewayStatus
1.3.6.1.4.1.9.9.865.0.3
A ciscoDlrRingGatewaySatus notification is generated when the value of ciscoDlrRingGatewayDeviceState is changed to ACTIVE or BACKUP. The notification contains ciscoDlrRingID, ciscoDlrRingName, ciscoDlrGatewayDeviceStatus.
ciscoDlrRingID
1.3.6.1.4.1.9.9.865.1.1.1.2
Unsigned32
A ring identifier of a DLR ring.
ciscoDlrRingName
1.3.6.1.4.1.9.9.865.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual description of DLR ring. This object should contain a string which identifies the dlr ring name.
ciscoDlrRingGatewayDeviceStatus
1.3.6.1.4.1.9.9.865.1.1.1.6
DlrGatewayDeviceStatus0 = undefined1 = nonGateway2 = activeGateway3 = backupGateway4 = faultGateway5 = nonSupportedGateway6 = partialFaultGatewayOperational status of the DLR ring. undefined(0) Value is not valid. nonGateway(1) Not a Gateway device. activeGateway(2) Device is a active gateway. backupGateway(3) Device is a backup gateway. faultGateway(4) Device is an fault gateway state. nonSupportedGateway(5) Device donot support gateway. partialFaultGateway(6) Device is a partial fault gateway.Reference: Dlr ring gateway device status · Integer32
Operational status of the DLR Gateway Device. The different operational staus of the gateway device are defined as part of DlrGatewayStatus.