1998-06-30
The MIB module for managing DS0 Bundles. This MIB contains additional objects to supplement the the IETF draft ds0Bundle MIB.
Download CISCO-DS0BUNDLE-EXT-MIB.txt Open CISCO-DS0BUNDLE-EXT-MIB.txt in a new tab
| Name | OID |
|---|---|
| cdsx0BundleExtTableaugments dsx0BundleTable (CISCO-DS0BUNDLE-MIB) | 1.3.6.1.4.1.9.10.33.1.1.1 |
| cdsx0BundleUseTable | 1.3.6.1.4.1.9.10.33.1.2.1 |
END OF TOC
1.3.6.1.4.1.9.10.33.1.1.1
augments dsx0BundleTable (CISCO-DS0BUNDLE-MIB)
Index: dsx0BundleIndex
This table is used to supplement the dsx0BundleTable.
from CISCO-DS0BUNDLE-MIB
INTEGER (0..2147483647) · Integer32
A unique identifier for a ds0Bundle. This is not the same value as ifIndex. This table is not indexed by ifIndex because the manager has to choose the index in a createable row and the agent must be allowed to select ifIndex values.
1.3.6.1.4.1.9.10.33.1.1.1.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The ifIndex of the DS1 line containing the ds0 timeslots in this bundle. The ds0 bundle interface is layered on top of the DS1 line. This layering is represented in the ifStackTable. This object is not instantiated until the value is specified. The value may be set only when the ds0 bundle is created.
1.3.6.1.4.1.9.10.33.1.1.1.1.2
Ds0ChannelListA list of ds0 timeslots on a DS1 line. The list is specified as an OCTET STRING in which each ds0 timeslot is represented by a single bit, where timeslots 1 through 8 are represented by the bits in the first octet, timeslots 9 through 16 by the bits in the second octet, etc. In each octet, the lowest numbered timeslot is represented by the most significant bit, and the highest numbered timeslot by the least significant bit. A timeslot is present in the list when its bit is set, and absent when its bit is reset. If the OCTET STRING value has fewer bits than required to represent one or more timeslots on a DS1, then those timeslots are absent from the list. If the OCTET STRING value has more bits than required to represent the timeslots on a DS1, then the extra bits are ignored. SIZE (0..4) · OCTET STRING
A list of ds0 timeslots that comprise this ds0 bundle. This object is not instantiated until the value is specified. The value may be set only when the ds0 bundle is created.
1.3.6.1.4.1.9.10.33.1.1.1.1.3
INTEGER1 = none2 = atmFuni3 = frameRelay · Integer32
The type of encapsulation for this bundle. A ds0 bundle is a logical serial port. Setting this object defines the type of the serial port. If not specified, the value is none(1), indicating that the encapsulation type on this serial port is not defined. If the value is changed to atmFuni(2), the agent will create an entry in the ifTable with ifType equal to atmFuni(106). If the value is changed to frameRelay(3), the agent will create an entry in the ifTable with ifType equal to frameRelayService(44). The new atmFuni or frameRelayService interface is layered on top of the ds0 bundle interface. This layering will be represented in the ifStackTable. The value of this object can be changed only if the ifOperStatus of the associated atmFuni or frameRelayService interface is down. When the value is changed, the agent removes all existing connections on the interface, and also deletes the ifEntry that was created because of the previous value.
1.3.6.1.4.1.9.10.33.1.1.1.1.4
INTEGER1 = rate562 = rate64 · Integer32
The data rate of each ds0 in this bundle. rate56 - 56kb/s rate64 - 64kb/s For ds0's on a T1 line, the value should be rate56(1) if 'robbed bit' signaling is used, and rate64(2) if clear channel signaling is used. For ds0's on a E1 line, the value should always be rate64(2). The value can be set only when the entry is created.
1.3.6.1.4.1.9.10.33.1.2.1
Index: ifIndex
Shows the ds0 timeslots that are currently in use (i.e., part of a ds0 bundle) on channelized DS1 lines. There is an entry in this table for each channelized DS1 line which has an ifEntry.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.10.33.1.2.1.1.1
Ds0ChannelListA list of ds0 timeslots on a DS1 line. The list is specified as an OCTET STRING in which each ds0 timeslot is represented by a single bit, where timeslots 1 through 8 are represented by the bits in the first octet, timeslots 9 through 16 by the bits in the second octet, etc. In each octet, the lowest numbered timeslot is represented by the most significant bit, and the highest numbered timeslot by the least significant bit. A timeslot is present in the list when its bit is set, and absent when its bit is reset. If the OCTET STRING value has fewer bits than required to represent one or more timeslots on a DS1, then those timeslots are absent from the list. If the OCTET STRING value has more bits than required to represent the timeslots on a DS1, then the extra bits are ignored. SIZE (0..4) · OCTET STRING
A list of ds0 timeslots on this DS1 line that are currently in use, i.e., are part of some ds0 bundle.