CISCO-EPC-GATEWAY-MIB

Counter32

This object represents the total number of incoming calls dropped at the gateway. This counter is incremented when the gateway receives an incoming call request at high congestion level, and the request is dropped.

Counter32

This object represents the number of times low congestion occurred on the gateway. The value is equal to the number of times the gateway exceeded the congestion threshold cegCongestionLowThreshold.

Counter32

This object represents the number of times high congestion occurred on the gateway. The value is equal to the number of times the gateway exceeded the congestion threshold cegCongestionHighThreshold.

Counter32 · buffer

This object represents the total number of buffers allocated by buffering agent.

Counter32 · buffer

This object represents the total number of buffers deallocated by buffering agent.

Counter32

This object represents the total number of buffers that got timed out, at buffering agent. A buffer is timed out when the discard timer cegBufferDiscardDataTime expires.

Counter32 · packet

This object represents the total number of packets enqueued to the buffering agent.

Counter32 · packet

This object represents the total number of packets dequeued from the buffering agent.

Counter32 · Bytes

This object represents the total bytes of data enqueued to the buffering agent.

Counter32 · Bytes

This object represents the total bytes of data dequeued from the buffering agent.

Counter32

This object represents the total number of times, buffer allocation is rejected by gateway due to, requested memory is greater than cegTotalBufferAvailable.

Counter32

This object represents the total number of times, buffer allocation is rejected due to, low memory availability in the gateway.

Counter32

This object represents the number of packet drops due to bearer maximum packet limit.

Counter32

This object represents the number of packet drops due to bearer maximum buffer limit.

Unsigned32 (0..100) · percent

This object specifies the low threshold for congestion. Congestion DFP metric considers the current CPU memory usage and number of bearers open. On reaching the low congestion threshold, based on the ARP, high priority calls are accepted and those with a lower priority are rejected.

Unsigned32 (0..100) · percent

This object specifies the high threshold for congestion. Congestion DFP metric considers the current CPU memory usage and number of bearers open. Once the high threshold is reached all new calls are rejected.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object specifies the state of the buffering agent. 'true' - indicates that the buffering agent is enabled. 'false' - indicates that the buffering agent is disabled.

Unsigned32 (400..12000) · Bytes

This object represents the maximum size of a buffer that can be allocated for a bearer. This object is directly dependent on object cegBufferingAgentEnabled and is applicable only when buffering agent is enabled, that is when cegBufferingAgentEnabled is 'true'.

Unsigned32 (1..300) · second

This object specifies the duration for which the buffering agent waits before discarding a buffer. The discard timer begins when a packet is enqueued in the allocated buffer for a bearer. Whenever a packet is enqueued for a bearer, the discard timer is reset. If the timer expires, then the buffer is freed.

Unsigned32 (1..15) · packet

This object specifies the maximum number of packets allowed per buffer in buffering agent. Any new incoming packet after this value has reached its maximum will be dropped.

SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (1..100) · OCTET STRING · hint 255t

This object represents the current version of the PGW or SGW software running on the gateway. Display format: <software> : <version>:<release>.

Gauge32 · bearer

This object represents the total activated IPv4 GTPv2 bearers.

Gauge32 · bearer

This object represents the total activated IPv6 GTPv2 bearers.

Gauge32

This object represents the total number of users connected to the gateway.

Gauge32 · Users

This object represents the total number of users currently in ISR state in the gateway.

Gauge32

This object represents the total number of users suspended by the gateway. A user would be suspended when E-UTRAN coverage is overlapped by either GERAN or UTRAN coverage leading to a Circuit Switch fallback from E-UTRAN. The Circuit Switch fallback enables reuse of voice and other Circuit Switch services by reuse of the Circuit Switch infrastructure.

Gauge32 · sessions

This object represents the total number of activated IPv4v6 sessions.

Unsigned32 (0..65535)

This object represents the DFP weight value, which is the measure of the load on CPU in the gateway.

INTEGER1 = normal2 = low3 = high · Integer32

This object represents the gateway congestion status. normal - The gateway is not in a congestion state. At this state, the value of cegCongestionDfpWeight is less than value of cegCongestionLowThreshold. low - The gateway is running in low congestion state. At this state, the value of cegCongestionDfpWeight is more than value of cegCongestionLowThreshold but less than value of cegCongestionHighThreshold. high - The gateway is running in high congestion state. At this state, the value of cegCongestionDfpWeight is more than value of cegCongestionHighThreshold.

TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks

This object represents the timestamp at which low congestion last occurred on the gateway.

TimeIntervalA period of time, measured in units of 0.01 seconds. (0..2147483647) · Integer32

This object represents the duration of last low congestion.

TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks

This object represents the timestamp at which high congestion last occurred on the gateway.

TimeIntervalA period of time, measured in units of 0.01 seconds. (0..2147483647) · Integer32

This object represents the duration of the last high congestion.

Gauge32 · buffer

This object represents the total number of buffers currently allocated for the bearers, by buffering agents.

Gauge32 · packet

This object represents the total number of packets buffered at present in the buffers of buffering agents.

Gauge32 · Bytes

This object represents the total number of bytes buffered at present in the buffers of buffering agents.

Gauge32 · Bytes

This object represents the total unallocated bytes at buffering agents.

Gauge32 · bearers

This object represents the total number of activated IPv4v6 bearers.

Gauge32 · sessions

This object represents the total number of activated GTPV2 sessions in SGW mode.

Gauge32 · sessions

This object represents the total number of activated GTPV2 sessions in PGW mode.

Gauge32 · sessions

This object represents the total number of activated GTPV2 sessions in SP GW mode.

Gauge32 · Bearers

This object represents the total number of default and dedicated bearers currently active in the Gateway.

Gauge32 · Bearers

This object represents the total number of dedicated bearers currently active in the Gateway.

Gauge32 · Bearers

This object represents the total number of IPv4 dedicated bearers currently active in the Gateway.

Gauge32 · Bearers

This object represents the total number of IPv6 dedicated bearers currently active in the Gateway.

Gauge32 · Sessions

This object represents the total number of sessions currently in Idle state in the gateway.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

The object controls the generation of cegCongestionHighThresholdNotif as follows: 'true(1)' - the generation of cegCongestionHighThresholdNotif notifications is enabled. 'false(2)' - the generation of cegCongestionHighThresholdNotif notifications is disabled.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

The object controls the generation of cegCongestionLowThresholdNotif as follows: 'true(1)' - the generation of cegCongestionLowThresholdNotif notifications is enabled. 'false(2)' - the generation of cegCongestionLowThresholdNotif notifications is disabled.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

The object controls the generation of cegCongestionClearedNotif as follows: 'true(1)' - the generation of cegCongestionClearedNotif notifications is enabled. 'false(2)' - the generation of cegCongestionClearedNotif notifications is disabled.

This notification will be sent when the gateway congestion level goes above cegCongestionHighThreshold value. This gives an indication that the gateway is running at high congestion and at this state it would reject all new calls.

This notification will be sent when the gateway congestion level goes above cegCongestionLowThreshold value. This gives an indication that the gateway is running at low congestion at this state it can accept only the high priority calls and those with a lower priority would be rejected.

This notification will be sent when the gateway congestion level goes below cegCongestionLowThreshold value. This gives an indication that the gateway has recovered from congestion and it can accept all calls.