CISCO-ETHERLIKE-EXT-MIB

2010-06-04

The MIB module to describe generic objects for ethernet-like network interfaces. This MIB provides ethernet-like network interfaces information that are either excluded by EtherLike-MIB or specific to Cisco products.

Download CISCO-ETHERLIKE-EXT-MIB.txt Open CISCO-ETHERLIKE-EXT-MIB.txt in a new tab

TABLES (2)

Tables (2)

Name	OID
ceeDot3PauseExtTable	1.3.6.1.4.1.9.9.645.1.1.1
ceeSubInterfaceTable	1.3.6.1.4.1.9.9.645.1.2.1

END OF TOC

Table details

ceeDot3PauseExtTable

1.3.6.1.4.1.9.9.645.1.1.1

Index: dot3StatsIndex

A list of additional descriptive and status information about the MAC Control PAUSE function on the ethernet-like interfaces attached to a particular system, in extension to dot3PauseTable in EtherLike-MIB. There will be one row in this table for each ethernet-like interface in the system which supports the MAC Control PAUSE function.

from EtherLike-MIB

dot3StatsIndex

InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d

Reference: RFC 2863, ifIndex

An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

ceeDot3PauseExtAdminMode

1.3.6.1.4.1.9.9.645.1.1.1.1.1

BITS

Indicates preference to send or process pause frames on this interface. txDesired(0) - indicates preference to send pause frames, but autonegotiates flow control. This bit can only be turned on when the corresponding instance of dot3PauseAdminMode has the value of 'enabledXmit' or 'enabledXmitAndRcv'. rxDesired(1) - indicates preference to process pause frames, but autonegotiates flow control. This bit can only be turned on when the corresponding instance of dot3PauseAdminMode has the value of 'enabledRcv' or 'enabledXmitAndRcv'.

ceeDot3PauseExtOperMode

1.3.6.1.4.1.9.9.645.1.1.1.1.2

BITS

Provides additional information about the flow control operational status on this interface. txDisagree(0) - the transmit pause function on this interface is disabled due to disagreement from the far end on negotiation. rxDisagree(1) - the receive pause function on this interface is disabled due to disagreement from the far end on negotiation. txDesired(2) - the transmit pause function on this interface is desired. rxDesired(3) - the receive pause function on this interface is desired.

ceeSubInterfaceTable

1.3.6.1.4.1.9.9.645.1.2.1

Index: ifIndex

This table provides the subinterface related information associated to the Ethernet-like interfaces. The subinterface is a division of one physical interface into multiple logical interfaces. As an example of what a typical subinterface setup might look like on a device, a single Ethernet port such as GigabitEthernet0/0 would be subdivided into Gi0/0.1, Gi0/0.2, Gi0/0.3 and so on, each one performing as if it were a separate interface.

from IF-MIB

ifIndex

A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.

ceeSubInterfaceCount

1.3.6.1.4.1.9.9.645.1.2.1.1.1

Unsigned32 · subifs

This object represents the number of subinterfaces created on a Ethernet-like interface.

↑ To TOC