ceaMaxNNIPorts
1.3.6.1.4.1.9.9.466.1.1.1
Integer32 (0..512)
The max number of interfaces per module for which the ceaPortType can have the value 'nni'. The value of 0 is returned by this object if there is no limitation to the number of NNI ports.
CISCO-ETHERNET-ACCESS-MIB
2007-09-14
The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge device in an organizations network, e.g. a Metro Ethernet network. An edge device, is a customer located equipment, this is the first device which will connect the Service Provider's network and map subscriber traffic into the next layer. The access media could be either CAT5 or fiber. The access device (edge device) can be designed for DSL, Ethernet or other technologies, however, this MIB is designed for Ethernet. Terminology: UNI - User to Network Interface NNI - Network to Network Interface. ENI - Enhanced Network Interface. Enhanced UNI port. module/device - In an environment (specifically, in an SNMP context) consisting of a single chassis which can contain multiple cards, the term 'module' refers to a card and the term 'device' refers to the whole chassis. In an environment where multiple chassis are 'stacked' together, the term 'module' refers to a chassis and the term 'device' refers to the whole stack. In an environment containing only a single chassis without removable cards, the terms 'device' and 'module' both refer to the chassis and its contents.
Download CISCO-ETHERNET-ACCESS-MIB.txt Open CISCO-ETHERNET-ACCESS-MIB.txt in a new tab
Scalars (2)
| Name | OID |
|---|---|
| ceaMaxNNIPorts | 1.3.6.1.4.1.9.9.466.1.1.1 |
| ceaMaxUNIVlanCommunityPorts | 1.3.6.1.4.1.9.9.466.1.1.2 |
Tables (2)
| Name | OID |
|---|---|
| ceaPortTable | 1.3.6.1.4.1.9.9.466.1.2.1 |
| ceaUNIVlanTable | 1.3.6.1.4.1.9.9.466.1.2.2 |
END OF TOC
Scalar details
ceaMaxUNIVlanCommunityPorts
1.3.6.1.4.1.9.9.466.1.1.2
Integer32 (0..512)
The maximum number of ports on this device for which the ceaUNIVlanType object can have the value 'community'. The value of 0 is returned by this object if there is no limitation to the number of UNI VLAN Communities.
Table details
ceaPortTable
1.3.6.1.4.1.9.9.466.1.2.1
Index: ifIndex
This table contains Ethernet port specific information. There exists an entry for each Ethernet port with an ifType of 6 (ethernetCsmacd) in this table. Note that the maximum number of NNI ports that can be configured per module on this device is given by the value of ceaMaxNNIPorts.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
ceaPortType
1.3.6.1.4.1.9.9.466.1.2.1.1.1
INTEGER1 = unspecified2 = uni3 = nni4 = eni · Integer32
The current configuration of the port. Only ports that are supported by the ceaPortCapability object can be set. Unspecified port type is any other port type than NNI, UNI or ENI. unspecified = Not UNI, or NNI, or ENI uni = User to Network Interface port type. nni = Network to Network Interface port type. eni = Enhanced UNI port type.
ceaPortCapability
1.3.6.1.4.1.9.9.466.1.2.1.1.2
BITS
Types supported by the Ethernet port. If a port doesn't support the port type the ceaPortType will not allow set of the unsupported type. nni = Port supports NNI. uni = Port supports UNI. eni = Port supports ENI.
ceaUNIVlanTable
1.3.6.1.4.1.9.9.466.1.2.2
Index: managementDomainIndex · vtpVlanIndex
This table contains UNI VLAN information for all the VLANs which currently exist on this device. The number of UNI ports that can belong to a VLAN type 'community' is limited by the ceaMaxUNIVlanCommunityPorts object.
from CISCO-VTP-MIB
managementDomainIndex
ManagementDomainIndexAn arbitrary integer-value to uniquely identify a management domain on the local system. (1..255) · Integer32
An arbitrary value to uniquely identify the management domain on the local system.
vtpVlanIndex
VlanIndexThe VLAN-id of a VLAN on ISL or 802.1q trunks. Modification of default parameters is allowed. Implementations are allowed to restrict the range of VLANs. For entities support up to 1024 VLANS. VLANs above 1000 are reserved for default VLANs and future use. Modification of default parameters is allowed. Creation or deletion of VLANs above 1000 is not allowed. For a new object which needs the vlan-id of a VLAN as its SYNTAX, it is suggested to import VlanIndex from Q-BRIDGE-MIB instead of importing this TC here in CISCO-VTP-MIB. (0..4095) · Integer32
The VLAN-id of this VLAN on ISL or 802.1q trunks.
ceaUNIVlanType
1.3.6.1.4.1.9.9.466.1.2.2.1.1
CeaVlanUNIType1 = other2 = isolated3 = communityThe type of a VLAN. 'other' -- this VLAN is not a UNI VLAN 'isolated' -- this VLAN is a UNI isolated VLAN. UNI ports that are members of a UNI isolated VLAN can not communicate with other ports in that VLAN, however NNI ports can communicate with UNI and NNI ports in the same VLAN. 'community' -- this VLAN is a UNI community VLAN. UNI and NNI ports that are members of the community VLAN can communicate with all other UNI and NNI ports in the same VLAN. · Integer32
Indicates the VLAN type defined for the UNI VLAN.