CISCO-FABRIC-HFR-MIB

CfhPlaneA unique value, greater than zero, for each fabric plane in the managed system. It is recommended that values are assigned contiguously starting from 1. (1..4294967295) · Unsigned32

The fabric plane identifier. A unique value, greater than zero, for each fabric plane hardware that is detected by the fabric software in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each fabric plane ID must remain constant from one re-initialization of the entity's network management system to the next re-initialization.

CfhAdminState1 = up2 = downAn enumerated value that provides an indication of the desired administrative state of a fabric entity. up - bring up the fabric entities. down - shut down the fabric entities. · Integer32

This object controls whether the fabric plane should be brought 'down' or 'up'.

INTEGER1 = up2 = down3 = mcastDown4 = oos · Integer32

This object indicates the current fabric plane operational status. up - The plane is fully 'up' (i.e., the plane can pass both unicast and multicast traffic). down - The plane is fully 'down' (i.e., th plane can't pass both unicast and multicast traffic). mcastDown - The multicast state of the plane is 'down' (i.e., unicast traffic can pass though the plane but multicast traffic can't). oos - The plane is out of service (i.e., online diag detects the fabric transport media has problem in the plane).

Unsigned32

The total number of fabric bundles in the fabric plane.

Gauge32

The current number of downed fabric bundles in the fabric plane.

Counter64 (0..18446744073709551615)

The accumulated number of data cells have been received by all link receivers for this plane.

Counter64 (0..18446744073709551615)

The accumulated number of data cells had been transmitted by all link transmitters for this plane.

Counter32

The accumulated number of correctable errored cells had been received by all link receivers for this plane.

Counter32

The accumulated number of uncorrectable errored cells had been received by all link receivers for this plane.

Counter32

The accumulated number of corrupted cells (e.g., parity error was detected in the cells) have been received by all fabric link receivers for this plane.

Counter32

The accumulated number of unicast cell loss for this plane. The lost cells are ones that had to be dropped because of queue overflow, or some such reason.

Counter32

The accumulated number of multicast cell loss for this plane. The lost cells are ones that had to be dropped because of queue overflow, or some such reason.

TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks

The value of sysUpTime on the most recent occasion at which all of fabric plane's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.

CfhBundleA unique value, greater than zero, for each fabric bundle in the managed system. It is recommended that values are assigned contiguously starting from 1. (1..4294967295) · Unsigned32

The fabric bundle identifier. A unique value, greater than zero, for each fabric bundle hardware that is detected by the fabric software in the managed system.

SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t

The textual name of the interface. The value of this object should be the name of the fabric bundle as assigned by the fabric software and should be suitable for use in commands entered at the device's `console' The bundle name is a location string with the following syntax <rack>/<slot>/<module>/<bundle port>. Where <rack> is line card rack, <slot> is the fabric card slot, <module> is fabric module and <bundle port> is the bundle connector on the fabric card ofnor OIM

CfhPlaneA unique value, greater than zero, for each fabric plane in the managed system. It is recommended that values are assigned contiguously starting from 1. (1..4294967295) · Unsigned32

The fabric bundle associated fabric plane.

INTEGER1 = up2 = down · Integer32

This object indicates the current fabric bundle operational status.

Unsigned32

The total fabric links in the fabric bundle.

Gauge32

The current number of downed fabric links in the fabric bundle.

PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d

The physical entity index of fabric card in the line card rack for the line card rack bundle port of the fabric bundle.

Unsigned32

The fabric bundle port identifier of the physical fabric bundle port that is on the cfhBundlePortLCRCardIndex associated fabric card.

PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d

The physical entity index of OIM in the fabric rack or fabric card in line card rack (only apply to a two line card racks system) for the second bundle port of the fabric bundle.

Unsigned32

The second fabric bundle port id of the physical fabric bundle port that is on the cfhBundlePort2CardIndex associated fabric card.

Unsigned32 (1..4294967295)

A unique value, greater than zero, for each fabric bundle port on a fabric card or OIM.

CfhAdminState1 = up2 = downAn enumerated value that provides an indication of the desired administrative state of a fabric entity. up - bring up the fabric entities. down - shut down the fabric entities. · Integer32

The object controls whether the fabric bundle port should be brought 'up' or shut 'down' administratively. up - bring up all fabric link transmitters and/or receivers of the fabric bundle port. down - shut down all fabric link transmitters and/or receivers of the fabric bundle port.

INTEGER1 = unknown2 = up3 = down · Integer32

The object indicates the operational state of the fabric bundle port. unknown - the bundle port state is unknown or in the transition between 'up' and 'down' state. up - bundle port operates normally down - bundle port was downed due to error condition or administratively shutdown.

CfhBundleA unique value, greater than zero, for each fabric bundle in the managed system. It is recommended that values are assigned contiguously starting from 1. (1..4294967295) · Unsigned32

The identifier of a fabric bundle that is associated to this fabric bundle port.

Counter64 (0..18446744073709551615)

The accumulated number of data cells have been received by all link receivers for this port.

Counter64 (0..18446744073709551615)

The accumulated number of data cells had been transmitted by all link transmitters for this port.

Counter32

The accumulated number of correctable errored cells had been received by all link receivers for this port.

Counter32

The accumulated number of uncorrectable errored cells had been received by all link receivers for this port.

Counter32

The accumulated number of corrupted cells (e.g., parity error was detected in the cells) have been received by all link receivers for this port.

Gauge32

The highest accumulated number of correctable errored cells that has been received on any single link in the port.

Gauge32

The highest accumulated number of uncorrectable errored cells that has been received on any single link in the port.

Gauge32

The highest accumulated number of corrupted cells (e.g., parity error was detected in the cells) that has been received on any single link in the port.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object indicates if the fabric is in use by the card (i.e., the card can sustain the fabric control traffic via one or more fabric planes of the card). If the value of this object is 'true', then the fabric is in use by the card, otherwise it is not.

CfhScaledPercentageThis textual convention represents scaled percentage values (i.e., percentage values multipled by a power of ten) for error ratio, resource availability/reliability/connectivity usage, etc. The UINTS clause associated with each object that use this textual convention as syntax will indicate the degree of precision up to industry standard five 9's (i.e., 99.999%) requirement. (0..100000) · Gauge32 · thousandths of a percent

The scaled percentage of elapsed time that the fabric has been in use by the card (has sustained fabric control traffic to the fabric) over the time interval since the last 'discontinuity' in its measurement time. That is, the interval is restarted whenever the value of cfhCardFabInUseDiscTime is changed.

TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks

The value of sysUpTime on the most recent occasion at which the cfhCardFabUsage (fabric inuse usage) suffered a discontinuity in its measurement. If no such discontinuity has occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object indicates if a card can transmit data via a fabric plane on the card. If the value of this object is 'true', the card can transmit data via the fabric plane; otherwise it is not.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This object indicates if a card can receive data via a fabric plane on the card. If the value of this object is 'true', the card can transfer data via the fabric plane; otherwise it is not.