entLogicalIndex
Integer32 (1..2147483647)
The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are not necessarily contiguous.
CISCO-FABRIC-MCAST-APPL-MIB
2002-12-18
Fabric multicast resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource application related information. Acronyms and terms: FGID - Fabric Multicast Group Identifier.
Download CISCO-FABRIC-MCAST-APPL-MIB.txt Open CISCO-FABRIC-MCAST-APPL-MIB.txt in a new tab
Table details
cfmaApplTable
1.3.6.1.4.1.9.9.256.1.1.1
Index: entLogicalIndex · cfmaApplId
This table contains fabric multicast resource usage for a particular fabric multicast client application.
from ENTITY-MIB
cfmaApplId
1.3.6.1.4.1.9.9.256.1.1.1.1.1
Unsigned32
An unique value, greater than zero, for each fabric client application that uses fabric multicast resource.
cfmaApplName
1.3.6.1.4.1.9.9.256.1.1.1.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (1..128) · OCTET STRING · hint 255t
The name of this fabric multicast client application.
cfmaApplInuseFgids
1.3.6.1.4.1.9.9.256.1.1.1.1.3
Gauge32 · fgid
The number of FGIDs that are currently in use by this application.
cfmaApplHighWaterInuseFGIDs
1.3.6.1.4.1.9.9.256.1.1.1.1.4
Gauge32 · fgid
The highest number of FGIDs that was in use by this application.
cfmaApplPoolId
1.3.6.1.4.1.9.9.256.1.1.1.1.5
CfmPoolIndexA unique value, greater than zero, for each fabric multicast resource pool in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each resource pool must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..4294967295) · Unsigned32 · hint d
The fabric multicast resource pool id for the resource pool which is used by this application.