2002-09-12
This module defines management information specific to Fibre Channel-attached devices. This module is an adaptation of IETF's IPS working group's draft, draft-ietf-ips-fcmgmt-mib-02
Download CISCO-FC-MGMT-MIB.txt Open CISCO-FC-MGMT-MIB.txt in a new tab
END OF TOC
1.3.6.1.4.1.9.10.999999.1.1
Index: cfcmInstanceIndex
Information about the local Fibre Channel management instances.
1.3.6.1.4.1.9.10.999999.1.1.1.1
Unsigned32 (1..4294967295)
An arbitrary integer value which uniquely identifies this instance amongst all local Fibre Channel management instances. It is mandatory that this value remain constant between restarts of the agent except, in case of certain re- configurations of the local system where it is natural for it to change. It is desirable that this value remain constant across restarts.
1.3.6.1.4.1.9.10.999999.1.1.1.2
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
If the instance has one (or more) WWN(s), then this object contains that (or one of those) WWN(s). If the instance does not have a WWN associated with it, then this object contains the zero-length string.
1.3.6.1.4.1.9.10.999999.1.1.1.3
CfcmFcUnitFunctionsA set of functions that a Fibre Channel Interconnect Element or Platform might perform. A value with no bits set, indicates the function(s) are unknown. The individual bits have the following meanings: other - none of the following. hub - a device that interconnects L_Ports, but does not operate as an FL_Port. switch - a fabric element conforming to the Fibre Channel switch fabric set of standards (e.g., FC-SW, FC-SW-2). bridge - a device that encapsulates Fibre Channel frames within another protocol (e.g., FC-BB, FC-BB-2). gateway - a device that converts an FC-4 to another protocol (e.g., FCP to iSCSI). host - a computer system that provides end users services such as computation and storage access. storageSubsys - an integrated collection of storage controllers, storage devices, and necessary software, that provides storage services to one or more hosts. storageAccessDev - a device that provides storage management and access for heterogeneous hosts and heterogeneous devices (e.g., medium changer). nas - a device that connects to a network and provides file access services. wdmux - a device that modulates/demodulates each of several data streams (e.g., Fibre Channel protocol data streams) onto/from a different part of the light spectrum in an optical fiber. · BITS
One (or more) Fibre Channel unit functions being performed by this instance.
1.3.6.1.4.1.9.10.999999.1.1.1.4
CfcmPhysicalIndexOrZeroThe index value for a physical entity's row in the Entity MIB's entPhysicalTable. A zero value indicates that no row in the entPhysicalTable is applicable.Reference: entPhysicalTable is defined in the Entity MIB, RFC 2737. (0..2147483647) · Integer32
Reference: entPhysicalIndex is defined in the Entity MIB, RFC 2737.
If this management instance corresponds to a physical component (or to a hierarchy of physical components), then this object's value is the value of the entPhysicalIndex of that component (or of the component at the root of that hierarchy). If there is no correspondence to a physical component (or no component which has an entPhysicalIndex value), then the value of this object is zero.
1.3.6.1.4.1.9.10.999999.1.1.1.5
CfcmHrSWInstalledIndexOrZeroThe index value for a software module's row in the Host Resources MIB's hrSWInstalledTable. A zero value indicates that no row in the hrSWInstalledTable is applicable.Reference: hrSWInstalledTable is defined in the Host Resources MIB, RFC 2790. (0..2147483647) · Integer32
Reference: hrSWInstalledIndex is defined in the Host Resources MIB, RFC 2790
If this management instance corresponds to an installed software module, then this object's value is the value of the hrSWInstalledIndex of that module. If there is no correspondence to an installed software module (or no module which has a hrSWInstalledIndex value), then the value of this object is zero.
1.3.6.1.4.1.9.10.999999.1.1.1.6
INTEGER1 = unknown2 = ok3 = warning4 = failed · Integer32
Overall status of the Fibre Channel entity/entities managed by this management instance. The value should reflect the most serious status of such entities.
1.3.6.1.4.1.9.10.999999.1.1.1.7
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..79) · OCTET STRING · hint 255t
A textual name for this management instance and the Fibre Channel entity/entities that it is managing.
1.3.6.1.4.1.9.10.999999.1.1.1.8
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
A textual description of this management instance and the Fibre Channel entity/entities that it is managing.
1.3.6.1.4.1.9.10.999999.1.1.1.9
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The globally unique Fabric Identifier which identifies the fabric to which the Fibre Channel entity/entities managed by this management instance are connected, or, of which they are a part. This is typically the Node WWN of the principal switch of a Fibre Channel fabric. The zero-length string indicates that the fabric identifier is unknown (or not applicable).
1.3.6.1.4.1.9.10.999999.1.2
Index: cfcmInstanceIndex · cfcmSwitchIndex
A table of information about Fibre Channel switches which are managed by Fibre Channel management instances. Each Fibre Channel management instance can manage one or more Fibre Channel switches.
1.3.6.1.4.1.9.10.999999.1.2.1.1
Unsigned32 (1..4294967295)
An arbitrary integer which uniquely identifies a Fibre Channel switch amongst those managed by one Fibre Channel management instance.
1.3.6.1.4.1.9.10.999999.1.2.1.2
CfcmDomainIdOrZeroThe Domain Id (of a FC switch), or zero if no Domain Id has been assigned. (0..239) · Integer32
The Domain Id of this switch. A value of zero indicates that a switch has not (yet) been assigned a Domain Id.
1.3.6.1.4.1.9.10.999999.1.2.1.3
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
An indication of whether this switch is the principal switch within its fabric.
1.3.6.1.4.1.9.10.999999.1.3
Index: ifIndex
Reference: RFC 2863, The Interfaces Group MIB, June 2000.
Information about Fibre Channel ports. Each Fibre Channel port is represented by one entry in the IF-MIB's ifTable.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.10.999999.1.3.1.1
Unsigned32 (1..4294967295)
The value of cfcmInstanceIndex by which the Fibre Channel management instance, which manages this port, is identified in the cfcmInstanceTable.
1.3.6.1.4.1.9.10.999999.1.3.1.2
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The World Wide Name of the port, or the zero-length string if the port does not have a WWN.
1.3.6.1.4.1.9.10.999999.1.3.1.3
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The World Wide Name of the Node which contains this port, or the zero-length string if the port does not have a node WWN.
1.3.6.1.4.1.9.10.999999.1.3.1.4
CfcmFcPortType1 = unknown2 = other3 = dynamic4 = nPort5 = nlPort6 = fPort7 = flPort8 = ePort9 = bPortThe type of a Fibre Channel port, being one of the types described below. unknown - Fibre Channel port type is not known. other - the port type is something other than the ones described below. dynamic - the port could be one of the below port types and this varies dynamically. nPort - Any port on a node device, e.g., a disk, PC, etc. that is directly attached to a Fabric port. (Refer FC-PH, FC-FS). nlPort - An 'nPort' that also has arbitrated loop capabilities. (Refer FC-AL-2). fPort - A port on a fibre channel fabric. (Refer FC-PH, FC-FS). flPort - A 'fPort' that also has arbitrated loop capabilities. (Refer FC-AL-2). ePort - A fabric expansion port which attaches to another 'ePort' or 'bPort' to create an Inter-Switch Link. (Refer FC-SW-2). bPort - A bridge port on a device that implements FC-BBW and connects to an E_port on a switch. (Refer FC-BB). · Integer32
The administratively desired type of this port. Each port will typically only be able to support a subset of these types.
1.3.6.1.4.1.9.10.999999.1.3.1.5
CfcmFcPortType1 = unknown2 = other3 = dynamic4 = nPort5 = nlPort6 = fPort7 = flPort8 = ePort9 = bPortThe type of a Fibre Channel port, being one of the types described below. unknown - Fibre Channel port type is not known. other - the port type is something other than the ones described below. dynamic - the port could be one of the below port types and this varies dynamically. nPort - Any port on a node device, e.g., a disk, PC, etc. that is directly attached to a Fabric port. (Refer FC-PH, FC-FS). nlPort - An 'nPort' that also has arbitrated loop capabilities. (Refer FC-AL-2). fPort - A port on a fibre channel fabric. (Refer FC-PH, FC-FS). flPort - A 'fPort' that also has arbitrated loop capabilities. (Refer FC-AL-2). ePort - A fabric expansion port which attaches to another 'ePort' or 'bPort' to create an Inter-Switch Link. (Refer FC-SW-2). bPort - A bridge port on a device that implements FC-BBW and connects to an E_port on a switch. (Refer FC-BB). · Integer32
The current operational type of this port.
1.3.6.1.4.1.9.10.999999.1.3.1.6
CfcmFcClassesA set of Fibre Channel classes of service.Reference: Classes of service are described in FC-FS Section 13. · BITS
The classes of service capability of this port.
1.3.6.1.4.1.9.10.999999.1.3.1.7
CfcmFcClassesA set of Fibre Channel classes of service.Reference: Classes of service are described in FC-FS Section 13. · BITS
The classes of service that are currently operational on this port. For an FL_Port, this is the union of the classes being supported across all attached NL_Ports.
1.3.6.1.4.1.9.10.999999.1.3.1.8
INTEGER1 = unknown2 = other3 = shortwave850nm4 = longwave1550nm5 = longwave1310nm6 = electrical · Integer32
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.3
The technology of the port transceiver.
1.3.6.1.4.1.9.10.999999.1.3.1.9
INTEGER1 = unknown2 = other3 = gbic4 = embedded5 = glm6 = gbicSerialId7 = gbicNoSerialId8 = sfpSerialId9 = sfpNoSerialId · Integer32
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.4
The module type of the port connector. This object refers to the hardware implementation of the port. It will be 'embedded' if the hardware equivalent to Gigabit interface card (GBIC) is part of the line card and is unremovable. It will be 'glm' if it's a gigabit link module (GLM). It will be 'gbicSerialId' if the GBIC serial id can be read, else it will be 'gbicNoSerialId'. It will be 'sfpSerialId', if the small form factor (SFP) pluggable GBICs serial id can be read, else it will be 'sfpNoSerialId'.
1.3.6.1.4.1.9.10.999999.1.3.1.10
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.4
The serial number associated with the port (e.g., for a GBIC). If not applicable, the object's value is a zero- length string.
1.3.6.1.4.1.9.10.999999.1.3.1.11
Unsigned32
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.5
This is the port's 'Physical Port Number' as defined by GS-3.
1.3.6.1.4.1.9.10.999999.1.3.1.12
INTEGER1 = auto2 = eighthGbs3 = quarterGbs4 = halfGbs5 = oneGbs6 = twoGbs7 = fourGbs8 = tenGbs · Integer32
The speed of the interface: 'auto' - auto-negotiation 'tenGbs' - 10Gbs 'fourGbs' - 4Gbs 'twoGbs' - 2Gbs 'oneGbs' - 1Gbs 'halfGbs' - 500Mbs 'quarterGbs' - 250Mbs 'eighthGbs' - 125Mbs
1.3.6.1.4.1.9.10.999999.1.3.1.13
BITS
A bit mask specifying the higher level protocols which are supported on this port. Note that for generic Fx_Ports, E_Ports and B_Ports, this object will indicate all protocols.
1.3.6.1.4.1.9.10.999999.1.3.1.14
BITS
A bit mask specifying the higher level protocols which are currently operational on this port. For Fx_Ports, E_Ports and B_Ports, this object will typically have the value 'unknown'.
1.3.6.1.4.1.9.10.999999.1.4
augments cfcmPortTable
Index: ifIndex
A list of statistics for Fibre Channel ports.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.10.999999.1.4.1.1
Counter64 (0..18446744073709551615)
The number of transitions in/out of the buffer-to-buffer credit zero state. The other side is not providing any credit.
1.3.6.1.4.1.9.10.999999.1.4.1.2
Counter64 (0..18446744073709551615)
The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero, i.e., there became no credit to provide to other side.
1.3.6.1.4.1.9.10.999999.1.4.1.3
Counter64 (0..18446744073709551615)
The number of Class 2 frames received at this port.
1.3.6.1.4.1.9.10.999999.1.4.1.4
Counter64 (0..18446744073709551615)
The number of octets contained in Class 2 frames received at this port.
1.3.6.1.4.1.9.10.999999.1.4.1.5
Counter64 (0..18446744073709551615)
The number of Class 2 frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.4.1.6
Counter64 (0..18446744073709551615)
The number of octets contained in Class 2 frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.4.1.7
Counter64 (0..18446744073709551615)
The number of Class 2 frames that were discarded upon reception at this port.
1.3.6.1.4.1.9.10.999999.1.4.1.8
Counter64 (0..18446744073709551615)
The number of times that F_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when either the fabric or the destination port is temporarily busy. Note that this counter will never increment for an F_Port.
1.3.6.1.4.1.9.10.999999.1.4.1.9
Counter64 (0..18446744073709551615)
The number of times that P_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when the destination port is temporarily busy.
1.3.6.1.4.1.9.10.999999.1.4.1.10
Counter64 (0..18446744073709551615)
The number of times that F_RJT was returned to this port as a result of a Class 2 frame that was rejected by the fabric. Note that this counter will never increment for an F_Port.
1.3.6.1.4.1.9.10.999999.1.4.1.11
Counter64 (0..18446744073709551615)
The number of times that P_RJT was returned to this port as a result of a Class 2 frame that was rejected at the destination N_Port.
1.3.6.1.4.1.9.10.999999.1.4.1.12
Counter64 (0..18446744073709551615)
The number of times that F_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because either the Fabric or the destination port was temporarily busy. Note that this counter will never increment for an N_Port.
1.3.6.1.4.1.9.10.999999.1.4.1.13
Counter64 (0..18446744073709551615)
The number of times that P_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because the destination port was temporarily busy. Note that this counter will never increment for an F_Port.
1.3.6.1.4.1.9.10.999999.1.4.1.14
Counter64 (0..18446744073709551615)
The number of times that F_RJT was generated by this port as a result of a Class 2 frame being rejected by the fabric. Note that this counter will never increment for an N_Port.
1.3.6.1.4.1.9.10.999999.1.4.1.15
Counter64 (0..18446744073709551615)
The number of times that P_RJT was generated by this port as a result of a Class 2 frame being rejected at the destination N_Port. Note that this counter will never increment for an F_Port.
1.3.6.1.4.1.9.10.999999.1.4.1.16
Counter64 (0..18446744073709551615)
The number of Class 3 frames received at this port.
1.3.6.1.4.1.9.10.999999.1.4.1.17
Counter64 (0..18446744073709551615)
The number of octets contained in Class 3 frames received at this port.
1.3.6.1.4.1.9.10.999999.1.4.1.18
Counter64 (0..18446744073709551615)
The number of Class 3 frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.4.1.19
Counter64 (0..18446744073709551615)
The number of octets contained in Class 3 frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.4.1.20
Counter64 (0..18446744073709551615)
The number of Class 3 frames that were discarded upon reception at this port.
1.3.6.1.4.1.9.10.999999.1.4.1.21
Counter32
The number of Class F frames received at this port.
1.3.6.1.4.1.9.10.999999.1.4.1.22
Counter32
The number of octets contained in Class F frames received at this port.
1.3.6.1.4.1.9.10.999999.1.4.1.23
Counter32
The number of Class F frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.4.1.24
Counter32
The number of octets contained in Class F frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.4.1.25
Counter32
The number of Class F frames that were discarded upon reception at this port.
1.3.6.1.4.1.9.10.999999.1.5
augments cfcmPortTable
Index: ifIndex
A list of Counter32-based statistics which are a shadow of the Counter64 statistics in the cfcmPortStatsTable, for systems which do not support Counter64.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.10.999999.1.5.1.1
Counter32
The number of transitions in/out of the buffer-to-buffer credit zero state. The other side is not providing any credit.
1.3.6.1.4.1.9.10.999999.1.5.1.2
Counter32
The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero, i.e., there became no credit to provide to other side.
1.3.6.1.4.1.9.10.999999.1.5.1.3
Counter32
The number of Class 2 frames received at this port.
1.3.6.1.4.1.9.10.999999.1.5.1.4
Counter32
The number of octets contained in Class 2 frames received at this port.
1.3.6.1.4.1.9.10.999999.1.5.1.5
Counter32
The number of Class 2 frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.5.1.6
Counter32
The number of octets contained in Class 2 frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.5.1.7
Counter32
The number of Class 2 frames that were discarded upon reception at this port.
1.3.6.1.4.1.9.10.999999.1.5.1.8
Counter32
The number of times that F_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when either the fabric or the destination port is temporarily busy. Note that this counter will never increment for an F_Port.
1.3.6.1.4.1.9.10.999999.1.5.1.9
Counter32
The number of times that P_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when the destination port is temporarily busy.
1.3.6.1.4.1.9.10.999999.1.5.1.10
Counter32
The number of times that F_RJT was returned to this port as a result of a Class 2 frame that was rejected by the fabric. Note that this counter will never increment for an F_Port.
1.3.6.1.4.1.9.10.999999.1.5.1.11
Counter32
The number of times that P_RJT was returned to this port as a result of a Class 2 frame that was rejected at the destination N_Port.
1.3.6.1.4.1.9.10.999999.1.5.1.12
Counter32
The number of times that F_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because either the Fabric or the destination port was temporarily busy. Note that this counter will never increment for an N_Port.
1.3.6.1.4.1.9.10.999999.1.5.1.13
Counter32
The number of times that P_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because the destination port was temporarily busy. Note that this counter will never increment for an F_Port.
1.3.6.1.4.1.9.10.999999.1.5.1.14
Counter32
The number of times that F_RJT was generated by this port as a result of a Class 2 frame being rejected by the fabric. Note that this counter will never increment for an N_Port.
1.3.6.1.4.1.9.10.999999.1.5.1.15
Counter32
The number of times that P_RJT was generated by this port as a result of a Class 2 frame being rejected at the destination N_Port. Note that this counter will never increment for an F_Port.
1.3.6.1.4.1.9.10.999999.1.5.1.16
Counter32
The number of Class 3 frames received at this port.
1.3.6.1.4.1.9.10.999999.1.5.1.17
Counter32
The number of octets contained in Class 3 frames received at this port.
1.3.6.1.4.1.9.10.999999.1.5.1.18
Counter32
The number of Class 3 frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.5.1.19
Counter32
The number of octets contained in Class 3 frames transmitted out of this port.
1.3.6.1.4.1.9.10.999999.1.5.1.20
Counter32
The number of Class 3 frames that were discarded upon reception at this port.
1.3.6.1.4.1.9.10.999999.1.6
augments cfcmPortTable
Index: ifIndex
Error counters for Fibre Channel ports.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.10.999999.1.6.1.1
Counter32
The number of Link resets (LR primitives) received.
1.3.6.1.4.1.9.10.999999.1.6.1.2
Counter32
The number of Link resets (LRs primitive) transmitted.
1.3.6.1.4.1.9.10.999999.1.6.1.3
Counter32
The number of times the reset link protocol was initiated on this port. This includes the number of Loop Initialization Primitive (LIP) events on an arbitrated loop port.
1.3.6.1.4.1.9.10.999999.1.6.1.4
Counter32
The number of Offline Primitive OLS received at this port.
1.3.6.1.4.1.9.10.999999.1.6.1.5
Counter32
The number of Offline Primitive OLS transmitted by this port.
1.3.6.1.4.1.9.10.999999.1.6.1.6
Counter32
Reference: FC-PH, rev 4.3, 1 June 1994, section 29.8.
The number of link failures. This count is part of FC-PH's Link Error Status Block (LESB).
1.3.6.1.4.1.9.10.999999.1.6.1.7
Counter32
Reference: FC-PH, rev 4.3, 1 June 1994, section 29.8.
The number of instances of synchronization loss detected at this port. This count is part of FC-PH's Link Error Status Block (LESB).
1.3.6.1.4.1.9.10.999999.1.6.1.8
Counter32
Reference: FC-PH, rev 4.3, 1 June 1994, section 29.8.
The number of instances of signal loss detected at this port. This count is part of FC-PH's Link Error Status Block (LESB).
1.3.6.1.4.1.9.10.999999.1.6.1.9
Counter32
Reference: FC-PH, rev 4.3, 1 June 1994, section 29.8.
The number of primitive sequence protocol errors detected at this port. This count is part of CFC-PH's Link Error Status Block (LESB).
1.3.6.1.4.1.9.10.999999.1.6.1.10
Counter32
Reference: FC-PH, rev 4.3, 1 June 1994, section 29.8.
The number of invalid transmission words received at this port. This count is part of FC-PH's Link Error Status Block (LESB).
1.3.6.1.4.1.9.10.999999.1.6.1.11
Counter32
Reference: FC-PH, rev 4.3, 1 June 1994, section 29.8.
The number of frames received with invalid CRC. This count is part of FC-PH's Link Error Status Block (LESB).
1.3.6.1.4.1.9.10.999999.1.6.1.12
Counter32
The number of invalid ordered sets received at this port.
1.3.6.1.4.1.9.10.999999.1.6.1.13
Counter32
The number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter.
1.3.6.1.4.1.9.10.999999.1.6.1.14
Counter32
The number of frames received at this port where the frame length was less than the minimum indicated by the frame header - normally 24 bytes, but it could be more if the DFCTL field indicates an optional header should have been present.
1.3.6.1.4.1.9.10.999999.1.6.1.15
Counter32
The number of frames received with unknown addressing. e.x. unknown SID or DID. the SID or DID is not known to the routing algorithm.
1.3.6.1.4.1.9.10.999999.1.6.1.16
Counter32
The number of invalid frame delimiters received at this port. An example is a frame with a class 2 start and a class 3 at the end.
1.3.6.1.4.1.9.10.999999.1.6.1.17
Counter32
The number of encoding disparity errors received at this port.
1.3.6.1.4.1.9.10.999999.1.6.1.18
Counter32
The number of errors which were detected on this port but which were not counted by any other error counter in this row.
1.3.6.1.4.1.9.10.999999.1.7
Index: ifIndex
Additional information about Fibre Channel ports which is specific to Fx_Ports. This table will contain one entry for each cfcmPortTable entry which represents an Fx_Port.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.10.999999.1.7.1.1
CfcmMilliSecondsTime units in milliseconds. · Unsigned32 · milliseconds
The Resource_Allocation_Timeout Value configured for this Fx_Port. This is used as the timeout value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents the Error_Detect_Timeout value (see cfcmFxPortEdtov) plus twice the maximum time that a frame may be delayed within the Fabric and still be delivered.
1.3.6.1.4.1.9.10.999999.1.7.1.2
CfcmMilliSecondsTime units in milliseconds. · Unsigned32 · milliseconds
The Error_Detect_Timeout value configured for this Fx_Port. This is used as the timeout value for detecting an error condition.
1.3.6.1.4.1.9.10.999999.1.7.1.3
CfcmMilliSecondsTime units in milliseconds. · Unsigned32 · milliseconds
The Receiver_Transmitter_Timeout value of this Fx_Port. This is used by the receiver logic to detect Loss of Synchronization.
1.3.6.1.4.1.9.10.999999.1.7.1.4
CfcmMicroSecondsTime units in microseconds. · Unsigned32 · microseconds
The maximum time that this Fx_Port shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that this Fx_Port does not support this parameter.
1.3.6.1.4.1.9.10.999999.1.7.1.5
CfcmFcBbCreditThe buffer-to-buffer credit of an FC port. i.e., the number of frames a FC device can receive at a time without causing a buffer overrun condition. (0..32767) · Integer32 · buffers
The maximum number of receive buffers which this port is capable of making available for holding frames from attached Nx_Port(s).
1.3.6.1.4.1.9.10.999999.1.7.1.6
CfcmFcBbCreditThe buffer-to-buffer credit of an FC port. i.e., the number of frames a FC device can receive at a time without causing a buffer overrun condition. (0..32767) · Integer32 · buffers
The minimum number of receive buffers which this port is capable of making available for holding frames from attached Nx_Port(s).
1.3.6.1.4.1.9.10.999999.1.7.1.7
CfcmFcDataFieldSizeThe Receive Data Field Size associated with an FC port. (128..2112) · Integer32 · bytes
The maximum size in bytes of the Data Field in a frame that this Fx_Port is capable of receiving from an attached Nx_Port.
1.3.6.1.4.1.9.10.999999.1.7.1.8
CfcmFcDataFieldSizeThe Receive Data Field Size associated with an FC port. (128..2112) · Integer32 · bytes
The minimum size in bytes of the Data Field in a frame that this Fx_Port is capable of receiving from an attached Nx_Port.
1.3.6.1.4.1.9.10.999999.1.7.1.9
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
An indication of whether this Fx_Port is capable of supporting Class 2 Sequential Delivery.
1.3.6.1.4.1.9.10.999999.1.7.1.10
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
An indication of whether this Fx_Port is capable of supporting Class 3 Sequential Delivery.
1.3.6.1.4.1.9.10.999999.1.7.1.11
CfcmMicroSecondsTime units in microseconds. · Unsigned32 · microseconds
The maximum holding time that this Fx_Port is capable of supporting.
1.3.6.1.4.1.9.10.999999.1.7.1.12
CfcmMicroSecondsTime units in microseconds. · Unsigned32 · microseconds
The minimum holding time that this Fx_Port is capable of supporting.
1.3.6.1.4.1.9.10.999999.1.8
Index: ifIndex
Additional information about E_Ports, B_Ports, and any other type of Fibre Channel port to which inter-switch links can be connected. This table will contain one entry for each cfcmPortTable entry which represents such a port.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.10.999999.1.8.1.1
CfcmFcBbCreditThe buffer-to-buffer credit of an FC port. i.e., the number of frames a FC device can receive at a time without causing a buffer overrun condition. (0..32767) · Integer32
The maximum number of Class F data frames which can be transmitted by the inter-switch port without receipt of ACK or Link_Response frames.
1.3.6.1.4.1.9.10.999999.1.8.1.2
CfcmFcDataFieldSizeThe Receive Data Field Size associated with an FC port. (128..2112) · Integer32 · bytes
The Receive Data Field Size which the inter-switch port has agreed to support for Class F frames to/from this port. The size specifies the largest Data Field Size for an FT_1 frame.
1.3.6.1.4.1.9.10.999999.1.9
Index: ifIndex · cfcmFLoginNxPortIndex
A table that contains one entry for each Nx_Port logged- in/attached to a particular Fx_Port in the switch. Each entry contains the services parameters established during the most recent Fabric Login, explicit or implicit. Note that an Fx_Port may have one or more Nx_Ports attached to it.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.10.999999.1.9.1.1
Unsigned32 (1..4294967295)
An arbitrary integer which uniquely identifies an Nx_Port amongst all those attached to the Fx_Port indicated by ifIndex.
1.3.6.1.4.1.9.10.999999.1.9.1.2
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The port name of the attached Nx_Port, or the zero-length string if unknown.
1.3.6.1.4.1.9.10.999999.1.9.1.3
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The node name of the attached Nx_Port, or the zero-length string if unknown.
1.3.6.1.4.1.9.10.999999.1.9.1.4
CfcmFcBbCreditModel1 = regular2 = alternateThe buffer-to-buffer credit model of an Fx_Port. · Integer32
The buffer-to-buffer credit model in use by the Fx_Port.
1.3.6.1.4.1.9.10.999999.1.9.1.5
CfcmFcBbCreditThe buffer-to-buffer credit of an FC port. i.e., the number of frames a FC device can receive at a time without causing a buffer overrun condition. (0..32767) · Integer32
The number of buffers available for holding frames to be transmitted to the attached Nx_Port. These buffers are for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port.
1.3.6.1.4.1.9.10.999999.1.9.1.6
CfcmFcClassesA set of Fibre Channel classes of service.Reference: Classes of service are described in FC-FS Section 13. · BITS
The Classes of Service which the Fx_Port has agreed to support for this Nx_Port.
1.3.6.1.4.1.9.10.999999.1.9.1.7
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
An indication of whether the Fx_Port has agreed to support Class 2 sequential delivery for this Nx_Port. This is only meaningful if Class 2 service has been agreed.
1.3.6.1.4.1.9.10.999999.1.9.1.8
CfcmFcDataFieldSizeThe Receive Data Field Size associated with an FC port. (128..2112) · Integer32
The Receive Data Field Size which the Fx_Port has agreed to support for Class 2 frames to/from this Nx_Port. The size specifies the largest Data Field Size for an FT_1 frame. This is only meaningful if Class 2 service has been agreed.
1.3.6.1.4.1.9.10.999999.1.9.1.9
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
An indication of whether the Fx_Port has agreed to support Class 3 sequential delivery for this Nx_Port. This is only meaningful if Class 3 service has been agreed.
1.3.6.1.4.1.9.10.999999.1.9.1.10
CfcmFcDataFieldSizeThe Receive Data Field Size associated with an FC port. (128..2112) · Integer32
The Receive Data Field Size which the Fx_Port has agreed to support for Class 3 frames to/from this Nx_Port. The size specifies the largest Data Field Size for an FT_1 frame. This is only meaningful if Class 3 service has been agreed.
1.3.6.1.4.1.9.10.999999.1.10
Index: cfcmInstanceIndex · cfcmLinkIndex
A table containing any Fibre Channel link information which is known to local Fibre Channel managed instances. One end of such a link is typically at a local port, but the table can also contain information on links for which neither end is a local port. If one end of a link terminates locally, then that end is termed 'end1'; the other end is termed 'end2'.
1.3.6.1.4.1.9.10.999999.1.10.1.1
Unsigned32
An arbitrary integer which uniquely identifies one link within the set of links about which a particular managed instance has information.
1.3.6.1.4.1.9.10.999999.1.10.1.2
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The node name of end1, or the zero-length string if unknown.
1.3.6.1.4.1.9.10.999999.1.10.1.3
Unsigned32
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.5
The physical port number of end1, or zero if unknown.
1.3.6.1.4.1.9.10.999999.1.10.1.4
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The port WWN of end1, or the zero-length string if unknown. ('end1' is local if this value is equal to the value of cfcmPortWwn in one of the rows of the cfcmPortTable.)
1.3.6.1.4.1.9.10.999999.1.10.1.5
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The node name of end2, or the zero-length string if unknown.
1.3.6.1.4.1.9.10.999999.1.10.1.6
Unsigned32
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.5
The physical port number of end2, or zero if unknown.
1.3.6.1.4.1.9.10.999999.1.10.1.7
CfcmFcNameIdOrZeroThe World Wide Name (WWN) associated with a Fibre Channel (FC) entity. WWNs were initially defined as 64-bits in length. The latest definition (for future use) is 128-bits long. The zero-length string value is used in circumstances where the WWN is unassigned/unknown. SIZE (0 | 8 | 16) · OCTET STRING
The port WWN of end2, or the zero-length string if unknown.
1.3.6.1.4.1.9.10.999999.1.10.1.8
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.1.7
The address of the SNMP agent for the Fibre Channel Interconnect Element or Platform of which end2 is a part. If the address is unknown, the value of this object is the zero-length string.
1.3.6.1.4.1.9.10.999999.1.10.1.9
CfcmFcPortType1 = unknown2 = other3 = dynamic4 = nPort5 = nlPort6 = fPort7 = flPort8 = ePort9 = bPortThe type of a Fibre Channel port, being one of the types described below. unknown - Fibre Channel port type is not known. other - the port type is something other than the ones described below. dynamic - the port could be one of the below port types and this varies dynamically. nPort - Any port on a node device, e.g., a disk, PC, etc. that is directly attached to a Fabric port. (Refer FC-PH, FC-FS). nlPort - An 'nPort' that also has arbitrated loop capabilities. (Refer FC-AL-2). fPort - A port on a fibre channel fabric. (Refer FC-PH, FC-FS). flPort - A 'fPort' that also has arbitrated loop capabilities. (Refer FC-AL-2). ePort - A fabric expansion port which attaches to another 'ePort' or 'bPort' to create an Inter-Switch Link. (Refer FC-SW-2). bPort - A bridge port on a device that implements FC-BBW and connects to an E_port on a switch. (Refer FC-BB). · Integer32
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.2
The port type of end2.
1.3.6.1.4.1.9.10.999999.1.10.1.10
CfcmFcUnitFunctionsA set of functions that a Fibre Channel Interconnect Element or Platform might perform. A value with no bits set, indicates the function(s) are unknown. The individual bits have the following meanings: other - none of the following. hub - a device that interconnects L_Ports, but does not operate as an FL_Port. switch - a fabric element conforming to the Fibre Channel switch fabric set of standards (e.g., FC-SW, FC-SW-2). bridge - a device that encapsulates Fibre Channel frames within another protocol (e.g., FC-BB, FC-BB-2). gateway - a device that converts an FC-4 to another protocol (e.g., FCP to iSCSI). host - a computer system that provides end users services such as computation and storage access. storageSubsys - an integrated collection of storage controllers, storage devices, and necessary software, that provides storage services to one or more hosts. storageAccessDev - a device that provides storage management and access for heterogeneous hosts and heterogeneous devices (e.g., medium changer). nas - a device that connects to a network and provides file access services. wdmux - a device that modulates/demodulates each of several data streams (e.g., Fibre Channel protocol data streams) onto/from a different part of the light spectrum in an optical fiber. · BITS
Reference: FC-GS-3 Rev 7.01, 28 Nov 2000, sections 6.1.2.1.2 and 6.1.2.3.2
The type of/function(s) performed by the Fibre Channel Interconnect Element or Platform of which end2 is a part.
1.3.6.1.4.1.9.10.999999.1.10.1.11
CfcmFcAddressIdA Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric. SIZE (0 | 3) · OCTET STRING
The Fibre Channel Address ID of end2, or the zero-length string if unknown.