2008-12-24
The MIB for Transaction Capabilities(TCAP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. This MIB provides information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 Signalling point. The relevant ITU documents describing this technology is the ITU Q series, ITU Q.771: Functional Description of Transaction Capabilities to ITU Q.775: Guidelines for Using Transaction Capabilities. This MIB consists of the following tables: Instance Table TCAP Utilization table TCAP Protocol Transaction Errors Received Table TCAP Protocol Transaction Errors Sent Table TCAP Protocol Component Errors Table TCAP User Errors Received Table TCAP User Errors Sent Table Abbreviations: ANSI - American National Standards Institute CLLI - Common-Language Location Identification GP - General Problem IP - Invoke Problem ITU - International Telecommunication Union MAP - SS7 Mobile Application Part. This layer provides mobility procedures to SS7 network applications. MAP is generically used to refer to both GSM-MAP, and the IS-41-D MAP Protocol. RRP - Return Result Problem REP - Return Error Problem TCAP - Transaction Capabilities Application Part. The application layer of the SS7 signalling protocol. TC - Transaction Capabiliities TID - Transaction Identifier TP - Transaction Problem.
Download CISCO-ITP-GTCAP-MIB.txt Open CISCO-ITP-GTCAP-MIB.txt in a new tab
SCALARS (34) · TABLES (7) · TRAPS (7)
END OF TOC
1.3.6.1.4.1.9.9.695.1.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The notification truth value. 'true' Indicates that the following TCAP error notifications are enabled. ciscoGtcapProtoErrTranAbortRcvd, ciscoGtcapProtoErrTranAbortSent. 'false' Indicates that the TCAP Transaction error notification generation is disabled.
1.3.6.1.4.1.9.9.695.1.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The notification truth value. 'true' Indicates that the following TCAP error notifications are enabled. ciscoGtcapProtoErrCompRejectRcvd, ciscoGtcapProtoErrCompRejectRcvd. 'false' Indicates that the TCAP Component error notification generation is disabled.
1.3.6.1.4.1.9.9.695.1.1.3
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The notification truth value. 'true' Indicates that the following TCAP error notifications are enabled. ciscoGtcapTCUserErrRejectRcvd, ciscoGtcapTCUserErrRejectSent. 'false' Indicates that the TCAP User error notification generation is disabled.
1.3.6.1.4.1.9.9.695.1.1.4
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The notification truth value. 'true' Indicates that ciscoGtcapActiveTranExceedThreshold notification generation is enabled. 'false' Indicates that ciscoGtcapActiveTranExceedThreshold notification generation is disabled.
1.3.6.1.4.1.9.9.695.1.1.5
Integer32 (60..86400) · seconds
This object specifies the time interval used to monitor the following notifications: ciscoGtcapProtoErrTranAbortRcvd, ciscoGtcapProtoErrTranAbortSent, ciscoGtcapProtoErrCompRejectRcvd, ciscoGtcapProtoErrCompRejectRcvd, ciscoGtcapTCUserErrRejectRcvd, ciscoGtcapTCUserErrRejectSent, ciscoGtcapActiveTranExceedThreshold for specific signalling point instance. The first occurrence of these notifications are sent and the further occurrences of notifications in this interval are suppressed. At the end of this interval, notifications are sent with total number of errors encountered during this interval.
1.3.6.1.4.1.9.9.695.1.1.6
Integer32 (300..86400) · seconds
This object specifies the time interval used to monitor the utilization of TCAP transactions. Changes to the polling interval will take effect after the completion of the current sample interval.
1.3.6.1.4.1.9.9.695.1.1.7
Unsigned32 (0 | 10..3600) · seconds
For distributed platforms, the value in seconds specifies how often information on measurements will be refreshed on supervisor. The valid range for distributed platforms is from 10 seconds to 1 hour. For a single processor platform, the value will be always zero.
1.3.6.1.4.1.9.9.695.1.9.1
Unsigned32 · seconds
Duration elapsed since the start of the cgtcapNotifWindowTime interval. This duration value can range from 0 upto cgtcapNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgtcapNotifWindowTime.
1.3.6.1.4.1.9.9.695.1.9.2
Unsigned32 · occurrences
Number of times during which the number of open transactions exceeded the Signalling point threshold during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.3
CItpTcTCAPUserTransaction Capabilities Application Part User. (0..255) · Unsigned32
TCAP user information for the notification.
1.3.6.1.4.1.9.9.695.1.9.4
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of unrecognized message type (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.5
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of incorrect TP (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.6
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of badly formatted TP (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.7
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of unrecognized TID (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.8
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of resource limitation (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.9
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.10
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of mistyped component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.11
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of badly structured component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.12
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized linked id - invoke problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.13
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized invoke id - return result problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.14
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of return result unexpected - return result problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.15
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized invoke id - return error problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.16
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of return error unexpected - return error problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.17
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - duplicate invoke id - invoke problem (Q752/14.3 & 14.6) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.18
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unrecognized operation - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.19
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.20
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - resource limitation - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.21
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - initiating release - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.22
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - linked response unexecpted - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.23
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unexpected linked operation - invoke problem (Q752/14.3) during this specific gtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.24
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unrecognized error - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.25
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unexpected error - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.26
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - return result problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.27
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.2.1
Index: cgspInstNetwork
TCAP information per instance of signalling point.
from CISCO-ITP-GSP-MIB
CItpTcNetworkNameThe network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enable the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..19) · OCTET STRING
The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
1.3.6.1.4.1.9.9.695.1.2.1.1.1
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of transaction messages sent from the local TCAP (Q752/13.1 bis).
1.3.6.1.4.1.9.9.695.1.2.1.1.2
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of transaction messages received from the remote TCAP (Q752/13.2 bis).
1.3.6.1.4.1.9.9.695.1.2.1.1.3
Counter32 · components
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Components sent from the local TCAP (Q752/13.3).
1.3.6.1.4.1.9.9.695.1.2.1.1.4
Counter32 · components
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Components received from the remote TCAP (Q752/13.4).
1.3.6.1.4.1.9.9.695.1.2.1.1.5
Counter32 · occurences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of times the number of open transactions exceeded the Signalling point threshold (Q752/13.11).
1.3.6.1.4.1.9.9.695.1.2.1.1.6
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Unidirectional type transactions received (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.7
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Unidirectional type transactions sent (Q752/13.2).
1.3.6.1.4.1.9.9.695.1.2.1.1.8
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Begin(ITU) or Query(ANSI) type transactions received (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.9
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Begin(ITU) or Query(ANSI) type transactions sent (Q752/13.2).
1.3.6.1.4.1.9.9.695.1.2.1.1.10
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Begin(ITU) or Query(ANSI) Without Permission type transactions received (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.11
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Begin(ITU) or Query(ANSI) Without Permission type transactions sent (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.12
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of End(ITU) or Response(ANSI) type transactions received (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.13
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of End(ITU) or Response(ANSI) type transactions sent (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.14
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Continue(ITU) or Conversation(ANSI) type transactions received (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.15
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Continue(ITU) or Conversation(ANSI) type transactions Sent (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.16
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Continue(ITU) or Conversation(ANSI) Without Permission type transactions received (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.17
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Continue(ITU) or Conversation(ANSI) Without Permission type transactions Sent (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.18
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Abort type transactions received (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.19
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 13.
Total number of Abort type transactions sent (Q752/13.1).
1.3.6.1.4.1.9.9.695.1.2.1.1.20
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14.
Total number of TC_L_CANCEL indications for Class 1 operations (Q752/14.7).
1.3.6.1.4.1.9.9.695.1.2.1.1.21
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14.
Total number of TCAP messages discarded for all reasons. This includes END messages with unrecognized TIDs (Q752/14.8).
1.3.6.1.4.1.9.9.695.1.2.1.1.22
Counter32 · messages
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14.
Total number of provider aborts received (Q752/14.10).
1.3.6.1.4.1.9.9.695.1.2.1.1.23
Counter32 · components
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14.
Total number of rejects received in TCAP components for this signalling point (Q752/14.11).
1.3.6.1.4.1.9.9.695.1.2.1.1.24
Counter32 · occurences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14.
Total number of errors detected in transaction portion (Q752/14.12).
1.3.6.1.4.1.9.9.695.1.3.1
Index: cgspInstNetwork · cgtcapUtilSlot · cgtcapUser
A table that contains the utilization measurements for the TCAP level transactions estimated during every configured cgtcapUtilSampleInterval. This table is provided to allow an NMS to collect the information during a normal poll cycle.
from CISCO-ITP-GSP-MIB
CItpTcNetworkNameThe network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enable the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..19) · OCTET STRING
The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
1.3.6.1.4.1.9.9.695.1.3.1.1.1
Unsigned32 (0..32767)
The slot number containing the CPU that is performing TCAP operations.
1.3.6.1.4.1.9.9.695.1.3.1.1.2
CItpTcTCAPUserTransaction Capabilities Application Part User. (0..255) · Unsigned32
The slot number containing the CPU that is performing TCAP operations.
1.3.6.1.4.1.9.9.695.1.3.1.1.3
Gauge32
This counter indicates the number of new transactions during the interval.
1.3.6.1.4.1.9.9.695.1.3.1.1.4
Gauge32
This counter indicates the mean number of open transaction ids during the interval.
1.3.6.1.4.1.9.9.695.1.3.1.1.5
Gauge32
This counter indicates the cumulative mean duration of transactions estimated during the interval.
1.3.6.1.4.1.9.9.695.1.3.1.1.6
Gauge32
This counter indicates the maximum number of open transactions ids estimated during the interval.
1.3.6.1.4.1.9.9.695.1.3.1.1.7
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
This timestamp indicates when time period ended for this sample.
1.3.6.1.4.1.9.9.695.1.3.1.1.8
EntPhysicalIndexOrZeroThis textual convention is an extension of entPhysicalIndex. If non-zero, the object is an entPhysicalIndex. If zero, no appropriate entPhysicalIndex exists. Any additional semantics are object specific. (0..2147483647) · Integer32
The entPhysicalIndex of the physical entity for which the statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.
1.3.6.1.4.1.9.9.695.1.4.1
Index: cgspInstNetwork
Total number of protocol errors received in transaction portion - abort received with different P-abort cause.
from CISCO-ITP-GSP-MIB
CItpTcNetworkNameThe network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enable the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..19) · OCTET STRING
The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
1.3.6.1.4.1.9.9.695.1.4.1.1.1
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.1. TC fault measurements.
Total number of protocol errors received in transaction portion - abort received with P-abort cause of unrecognized message type (Q752/14.1).
1.3.6.1.4.1.9.9.695.1.4.1.1.2
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.1. TC fault measurements.
Total number of protocol errors received in transaction portion - abort received with P-abort cause of incorrect TP (Q752/14.1).
1.3.6.1.4.1.9.9.695.1.4.1.1.3
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.1. TC fault measurements.
Total number of protocol errors received in transaction portion - abort received with P-abort cause of badly formatted TP (Q752/14.1).
1.3.6.1.4.1.9.9.695.1.4.1.1.4
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.1. TC fault measurements.
Total number of protocol errors received in transaction portion - abort received with P-abort cause of unrecognized TID (Q752/14.1).
1.3.6.1.4.1.9.9.695.1.4.1.1.5
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.1. TC fault measurements.
Total number of protocol errors received in transaction portion - abort received with P-abort cause of resource limitation (Q752/14.1).
1.3.6.1.4.1.9.9.695.1.5.1
Index: cgspInstNetwork · cgtcapUser
Total number of protocol errors sent in transaction portion - abort sent with different P-abort cause.
from CISCO-ITP-GSP-MIB
CItpTcNetworkNameThe network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enable the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..19) · OCTET STRING
The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
1.3.6.1.4.1.9.9.695.1.5.1.1.1
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.4. TC fault measurements.
Total number of protocol errors sent in transaction portion - abort sent with P-abort cause of unrecognized message type (Q752/14.4).
1.3.6.1.4.1.9.9.695.1.5.1.1.2
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.4. TC fault measurements.
Total number of protocol errors sent in transaction portion - abort sent with P-abort cause of incorrect TP (Q752/14.4).
1.3.6.1.4.1.9.9.695.1.5.1.1.3
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.4. TC fault measurements.
Total number of protocol errors sent in transaction portion - abort sent with P-abort cause of badly formatted TP (Q752/14.4).
1.3.6.1.4.1.9.9.695.1.5.1.1.4
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.4. TC fault measurements.
Total number of protocol errors sent in transaction portion - abort sent with P-abort cause of unrecognized TID (Q752/14.4).
1.3.6.1.4.1.9.9.695.1.5.1.1.5
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.4. TC fault measurements.
Total number of protocol errors sent in transaction portion - abort sent with P-abort cause of resource limitation (Q752/14.4).
1.3.6.1.4.1.9.9.695.1.6.1
Index: cgspInstNetwork
Total number of protocol errors sent and received in component portion - reject sent and received with different problem codes.
from CISCO-ITP-GSP-MIB
CItpTcNetworkNameThe network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enable the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..19) · OCTET STRING
The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
1.3.6.1.4.1.9.9.695.1.6.1.1.1
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Total number of protocol errors received in component portion - reject received with a problem code of unrecognized component - general problem (Q752/14.2).
1.3.6.1.4.1.9.9.695.1.6.1.1.2
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.5. TC fault measurements.
Total number of protocol errors sent in component portion - reject sent with a problem code of unrecognized component - general problem (Q752/14.5).
1.3.6.1.4.1.9.9.695.1.6.1.1.3
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Total number of protocol errors received in component portion - reject received with a problem code of mistyped component - general problem (Q752/14.2).
1.3.6.1.4.1.9.9.695.1.6.1.1.4
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.5. TC fault measurements.
Total number of protocol errors sent in component portion - reject sent with a problem code of mistyped component - general problem (Q752/14.5).
1.3.6.1.4.1.9.9.695.1.6.1.1.5
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Total number of protocol errors received in component portion - reject received with a problem code of badly structured component - general problem (Q752/14.2).
1.3.6.1.4.1.9.9.695.1.6.1.1.6
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.5. TC fault measurements.
Total number of protocol errors sent in component portion - reject sent with a problem code of badly structured component - general problem (Q752/14.5).
1.3.6.1.4.1.9.9.695.1.6.1.1.7
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Total number of protocol errors received in component portion - reject received with a problem code of unrecognized linked id - invoke problem (Q752/14.2).
1.3.6.1.4.1.9.9.695.1.6.1.1.8
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.5. TC fault measurements.
Total number of protocol errors sent in component portion - reject sent with a problem code of unrecognized linked id - invoke problem (Q752/14.5).
1.3.6.1.4.1.9.9.695.1.6.1.1.9
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Total number of protocol errors received in component portion - reject received with a problem code of unrecognized invoke id - return result problem (Q752/14.2).
1.3.6.1.4.1.9.9.695.1.6.1.1.10
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.5. TC fault measurements.
Total number of protocol errors sent in component portion - reject sent with a problem code of unrecognized invoke id - return result problem (Q752/14.5).
1.3.6.1.4.1.9.9.695.1.6.1.1.11
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Total number of protocol errors received in component portion - reject received with a problem code of return result unexpected - return result problem (Q752/14.2).
1.3.6.1.4.1.9.9.695.1.6.1.1.12
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.5. TC fault measurements.
Total number of protocol errors sent in component portion - reject sent with a problem code of return result unexpected - return result problem (Q752/14.5).
1.3.6.1.4.1.9.9.695.1.6.1.1.13
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Total number of protocol errors received in component portion - reject received with a problem code of unrecognized invoke id - return error problem (Q752/14.2).
1.3.6.1.4.1.9.9.695.1.6.1.1.14
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.5. TC fault measurements.
Total number of protocol errors sent in component portion - reject sent with a problem code of unrecognized invoke id - return error problem (Q752/14.5).
1.3.6.1.4.1.9.9.695.1.6.1.1.15
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Total number of protocol errors received in component portion - reject received with a problem code of return error unexpected - return error problem (Q752/14.2).
1.3.6.1.4.1.9.9.695.1.6.1.1.16
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.5. TC fault measurements.
Total number of protocol errors sent in component portion - reject sent with a problem code of return error unexpected - return error problem (Q752/14.5).
1.3.6.1.4.1.9.9.695.1.7.1
Index: cgspInstNetwork
Total number of TCAP user generated problems - reject received due to different component problems.
from CISCO-ITP-GSP-MIB
CItpTcNetworkNameThe network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enable the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..19) · OCTET STRING
The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
1.3.6.1.4.1.9.9.695.1.7.1.1.1
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - duplicate invoke id - invoke problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.2
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - unrecognized operation - invoke problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.3
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - mistyped parameter - invoke problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.4
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - resource limitation - invoke problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.5
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - initiating release - invoke problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.6
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - linked response unexecpted - invoke problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.7
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - unexpected linked operation - invoke problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.8
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - unrecognized error - return error problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.9
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - unexpected error - return error problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.10
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - mistyped parameter - return result problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.7.1.1.11
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.3. TC fault measurements.
Total number of TC user generated problems - reject received - mistyped parameter - return error problem (Q752/14.3).
1.3.6.1.4.1.9.9.695.1.8.1
Index: cgspInstNetwork · cgtcapUser
Total number of TCAP user generated problems - reject sent due to different component problems.
from CISCO-ITP-GSP-MIB
CItpTcNetworkNameThe network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enable the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..19) · OCTET STRING
The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
1.3.6.1.4.1.9.9.695.1.8.1.1.1
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject sent - duplicate invoke id - invoke problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.2
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject sent - unrecognized operation - invoke problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.3
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject sent - mistyped parameter - invoke problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.4
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject sent - resource limitation - invoke problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.5
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject sent - initiating release - invoke problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.6
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject sent - linked response unexecpted - invoke problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.7
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject sent - unexpected linked operation - invoke problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.8
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject sent - unrecognized error - return error problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.9
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject received - unexpected error - return error problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.10
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject received - mistyped parameter - return result problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.1.8.1.1.11
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.6. TC fault measurements.
Total number of TC user generated problems - reject received - mistyped parameter - return error problem (Q752/14.6).
1.3.6.1.4.1.9.9.695.0.1
The notification is generated, when a nonzero number of any of the protocol errors in transaction portion is received during the cgtcapNotifIntervalDuration, for the first time in the configured cgtcapNotifIntervalDuration. During such cases, this notification will be sent at the end of the cgtcapNotifIntervalDuration interval, with the counters indicating the total protocol errors during the entire cgtcapNotifIntervalDuration interval Q752/14.1
1.3.6.1.4.1.9.9.336.1.1.6
Counter32 · events
Reference: GR-82-CORE 6.6.1 Event Report Content R6-33
Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.
1.3.6.1.4.1.9.9.336.1.1.1
CItpTcCLLICommon Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided.Reference: Complete listings of geographical and geopolitical codes can be found in the BR 751-401-xxx series and BR 751-100-055, respectively. SIZE (0..11) · OCTET STRING
Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.
1.3.6.1.4.1.9.9.336.1.3.1.1.4
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..30) · OCTET STRING · hint 255t
A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.
1.3.6.1.4.1.9.9.695.1.9.1
Unsigned32 · seconds
Duration elapsed since the start of the cgtcapNotifWindowTime interval. This duration value can range from 0 upto cgtcapNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgtcapNotifWindowTime.
1.3.6.1.4.1.9.9.695.1.9.4
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of unrecognized message type (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.5
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of incorrect TP (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.6
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of badly formatted TP (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.7
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of unrecognized TID (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.8
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of resource limitation (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.0.2
The notification is generated, when a nonzero number of any of the protocol errors in transaction portion is sent during the cgtcapNotifIntervalDuration, for the first time in the configured cgtcapNotifIntervalDuration. During such cases, this notification will be sent at the end of the cgtcapNotifIntervalDuration interval, with the counters indicating the total protocol errors during the entire cgtcapNotifIntervalDuration interval Q752/14.4
1.3.6.1.4.1.9.9.336.1.1.6
Counter32 · events
Reference: GR-82-CORE 6.6.1 Event Report Content R6-33
Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.
1.3.6.1.4.1.9.9.336.1.1.1
CItpTcCLLICommon Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided.Reference: Complete listings of geographical and geopolitical codes can be found in the BR 751-401-xxx series and BR 751-100-055, respectively. SIZE (0..11) · OCTET STRING
Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.
1.3.6.1.4.1.9.9.336.1.3.1.1.4
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..30) · OCTET STRING · hint 255t
A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.
1.3.6.1.4.1.9.9.695.1.9.1
Unsigned32 · seconds
Duration elapsed since the start of the cgtcapNotifWindowTime interval. This duration value can range from 0 upto cgtcapNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgtcapNotifWindowTime.
1.3.6.1.4.1.9.9.695.1.9.3
CItpTcTCAPUserTransaction Capabilities Application Part User. (0..255) · Unsigned32
TCAP user information for the notification.
1.3.6.1.4.1.9.9.695.1.9.4
Counter32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of unrecognized message type (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.5
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of incorrect TP (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.6
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of badly formatted TP (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.7
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of unrecognized TID (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.8
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.1 and Table A.4. TC fault measurements.
Number of protocol errors in transaction portion - aborts with P-abort cause of resource limitation (Q752/14.1 & 14.4) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.0.3
The notification is generated, when a nonzero number of any of the protocol errors in component portion is received during the cgtcapNotifIntervalDuration, for the first time in the configured cgtcapNotifIntervalDuration. During such cases, this notification will be sent at the end of the cgtcapNotifIntervalDuration interval, with the counters indicating the total protocol errors during the entire cgtcapNotifIntervalDuration interval Q752/14.2
1.3.6.1.4.1.9.9.336.1.1.6
Counter32 · events
Reference: GR-82-CORE 6.6.1 Event Report Content R6-33
Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.
1.3.6.1.4.1.9.9.336.1.1.1
CItpTcCLLICommon Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided.Reference: Complete listings of geographical and geopolitical codes can be found in the BR 751-401-xxx series and BR 751-100-055, respectively. SIZE (0..11) · OCTET STRING
Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.
1.3.6.1.4.1.9.9.336.1.3.1.1.4
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..30) · OCTET STRING · hint 255t
A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.
1.3.6.1.4.1.9.9.695.1.9.1
Unsigned32 · seconds
Duration elapsed since the start of the cgtcapNotifWindowTime interval. This duration value can range from 0 upto cgtcapNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgtcapNotifWindowTime.
1.3.6.1.4.1.9.9.695.1.9.9
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.10
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of mistyped component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.11
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of badly structured component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.12
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized linked id - invoke problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.13
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized invoke id - return result problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.14
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of return result unexpected - return result problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.15
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized invoke id - return error problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.16
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of return error unexpected - return error problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.0.4
The notification is generated, when a nonzero number of any of the protocol errors in component portion is sent during the cgtcapNotifIntervalDuration, for the first time in the configured cgtcapNotifIntervalDuration. During such cases, this notification will be sent at the end of the cgtcapNotifIntervalDuration interval, with the counters indicating the total protocol errors during the entire cgtcapNotifIntervalDuration interval Q752/14.5
1.3.6.1.4.1.9.9.336.1.1.6
Counter32 · events
Reference: GR-82-CORE 6.6.1 Event Report Content R6-33
Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.
1.3.6.1.4.1.9.9.336.1.1.1
CItpTcCLLICommon Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided.Reference: Complete listings of geographical and geopolitical codes can be found in the BR 751-401-xxx series and BR 751-100-055, respectively. SIZE (0..11) · OCTET STRING
Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.
1.3.6.1.4.1.9.9.336.1.3.1.1.4
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..30) · OCTET STRING · hint 255t
A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.
1.3.6.1.4.1.9.9.695.1.9.1
Unsigned32 · seconds
Duration elapsed since the start of the cgtcapNotifWindowTime interval. This duration value can range from 0 upto cgtcapNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgtcapNotifWindowTime.
1.3.6.1.4.1.9.9.695.1.9.9
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.10
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of mistyped component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.11
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of badly structured component - general problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.12
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized linked id - invoke problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.13
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized invoke id - return result problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.14
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14 and Table A.2. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of return result unexpected - return result problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.15
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of unrecognized invoke id - return error problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.16
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.2 and Table A.5. TC fault measurements.
Number of protocol errors in component portion - rejects with a problem code of return error unexpected - return error problem (Q752/14.2 & 14.5) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.0.5
The notification is generated, when a nonzero number of any of the TC user errors is received during the cgtcapNotifIntervalDuration, for the first time in the configured cgtcapNotifIntervalDuration. During such cases, this notification will be sent at the end of the cgtcapNotifIntervalDuration interval, with the counters indicating the total TC User errors during the entire cgtcapNotifIntervalDuration interval Q752/14.3
1.3.6.1.4.1.9.9.336.1.1.6
Counter32 · events
Reference: GR-82-CORE 6.6.1 Event Report Content R6-33
Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.
1.3.6.1.4.1.9.9.336.1.1.1
CItpTcCLLICommon Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided.Reference: Complete listings of geographical and geopolitical codes can be found in the BR 751-401-xxx series and BR 751-100-055, respectively. SIZE (0..11) · OCTET STRING
Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.
1.3.6.1.4.1.9.9.695.1.9.1
Unsigned32 · seconds
Duration elapsed since the start of the cgtcapNotifWindowTime interval. This duration value can range from 0 upto cgtcapNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgtcapNotifWindowTime.
1.3.6.1.4.1.9.9.695.1.9.17
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - duplicate invoke id - invoke problem (Q752/14.3 & 14.6) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.18
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unrecognized operation - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.19
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.20
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - resource limitation - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.21
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - initiating release - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.22
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - linked response unexecpted - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.23
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unexpected linked operation - invoke problem (Q752/14.3) during this specific gtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.24
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unrecognized error - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.25
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unexpected error - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.26
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - return result problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.27
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.0.6
The notification is generated, when a nonzero number of any of the TC user errors is sent during the cgtcapNotifIntervalDuration, for the first time in the configured cgtcapNotifIntervalDuration. During such cases, this notification will be sent at the end of the cgtcapNotifIntervalDuration interval, with the counters indicating the total TC User errors during the entire cgtcapNotifIntervalDuration interval Q752/14.6
1.3.6.1.4.1.9.9.336.1.1.6
Counter32 · events
Reference: GR-82-CORE 6.6.1 Event Report Content R6-33
Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.
1.3.6.1.4.1.9.9.336.1.1.1
CItpTcCLLICommon Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided.Reference: Complete listings of geographical and geopolitical codes can be found in the BR 751-401-xxx series and BR 751-100-055, respectively. SIZE (0..11) · OCTET STRING
Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.
1.3.6.1.4.1.9.9.695.1.9.1
Unsigned32 · seconds
Duration elapsed since the start of the cgtcapNotifWindowTime interval. This duration value can range from 0 upto cgtcapNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgtcapNotifWindowTime.
1.3.6.1.4.1.9.9.695.1.9.3
CItpTcTCAPUserTransaction Capabilities Application Part User. (0..255) · Unsigned32
TCAP user information for the notification.
1.3.6.1.4.1.9.9.695.1.9.17
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - duplicate invoke id - invoke problem (Q752/14.3 & 14.6) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.18
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unrecognized operation - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.19
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.20
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - resource limitation - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.21
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - initiating release - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.22
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - linked response unexecpted - invoke problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.23
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unexpected linked operation - invoke problem (Q752/14.3) during this specific gtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.24
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unrecognized error - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.25
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - unexpected error - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.26
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - return result problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.1.9.27
Unsigned32 · occurrences
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 14, Table A.3 and Table A.6. TC fault measurements.
Number of TC user generated rejects - mistyped parameter - return error problem (Q752/14.3) during this specific cgtcapNotifIntervalDuration interval.
1.3.6.1.4.1.9.9.695.0.7
The notification generated when the number of open transaction IDs is greater than the thresholds during the configured cgtcapNotifIntervalDuration. During such cases, this notification will be sent at the end of the cgtcapNotifIntervalDuration interval, with the cgtcapIntervalActiveTranExceeds indicating the total exceeded open transactions during the entire cgtcapNotifIntervalDuration interval Q752/13.11
1.3.6.1.4.1.9.9.336.1.1.6
Counter32 · events
Reference: GR-82-CORE 6.6.1 Event Report Content R6-33
Each event or notification is required to provide a sequence number to be used by the NMS to determine when messages from a particular device are missing. This value will included in each SS7 notification issued by this device.
1.3.6.1.4.1.9.9.336.1.1.1
CItpTcCLLICommon Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided.Reference: Complete listings of geographical and geopolitical codes can be found in the BR 751-401-xxx series and BR 751-100-055, respectively. SIZE (0..11) · OCTET STRING
Common-Language Location Identification Codes (CLLI Codes). This object identifies the physical location of this device and can provide additional informaton on the device type.
1.3.6.1.4.1.9.9.336.1.3.1.1.4
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..30) · OCTET STRING · hint 255t
A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.
1.3.6.1.4.1.9.9.695.1.9.1
Unsigned32 · seconds
Duration elapsed since the start of the cgtcapNotifWindowTime interval. This duration value can range from 0 upto cgtcapNotifWindowTime. For the notifications generated at the end of the interval, this value will be equal to cgtcapNotifWindowTime.
1.3.6.1.4.1.9.9.695.1.9.2
Unsigned32 · occurrences
Number of times during which the number of open transactions exceeded the Signalling point threshold during this specific cgtcapNotifIntervalDuration interval.