2003-02-03
The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. This MIB for provides information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signaling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7. The IETF Working Group Signaling Transport (SIGTRAN) has defined MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) protocols. The drafts can be found at: http://www.ietf.org/html.charters/sigtran-charter.html This MIB consists of the following tables: Concerned Point Code List Table Mated Application (MAP) Table Global Title Translation (GTT) Selector Table Global Title Address (GTA) Table Application Group Table Prefix Conversion Table
Download CISCO-ITP-SCCP-MIB.txt Open CISCO-ITP-SCCP-MIB.txt in a new tab
SCALARS (32) · TABLES (7) · TRAPS (1)
| Name | OID |
|---|---|
| cItpSccpGttMapStateChange(deprecated) | 1.3.6.1.4.1.9.9.233.0.0.1 |
END OF TOC
1.3.6.1.4.1.9.9.233.1.1.1
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a message is handled from a local or remote subsystem(Q752/9.3).
1.3.6.1.4.1.9.9.233.1.1.2
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a message is handled from a local subsystem(Q752/9.4).
1.3.6.1.4.1.9.9.233.1.1.3
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a message requiring global title translation (Q752/9.5) is handled.
1.3.6.1.4.1.9.9.233.1.1.4
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a unitdata (UDT) message is sent (Q752/9 bis.1).
1.3.6.1.4.1.9.9.233.1.1.5
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a unitdata service (UDTS) message is sent (Q752/9 bis.2).
1.3.6.1.4.1.9.9.233.1.1.6
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a unitdata (UDT) message is received (Q752/9 bis.3).
1.3.6.1.4.1.9.9.233.1.1.7
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a unitdata service (UDTS) message is received (Q752/9 bis.4).
1.3.6.1.4.1.9.9.233.1.1.8
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a extended unitdata (XUDT) message is sent (Q752/9 bis.13).
1.3.6.1.4.1.9.9.233.1.1.9
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a extended unitdata service (XUDTS) message is sent (Q752/9 bis.14).
1.3.6.1.4.1.9.9.233.1.1.10
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a extended unitdata (XUDT) message is received (Q752/9 bis.15).
1.3.6.1.4.1.9.9.233.1.1.11
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a extended unitdata service (XUDTS) message is received (Q752/9 bis.16).
1.3.6.1.4.1.9.9.233.1.1.12
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a long unitdata (LUDT) message is sent (Q752/9 bis.17).
1.3.6.1.4.1.9.9.233.1.1.13
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a long unitdata (LUDT) service message is sent (Q752/9 bis.18).
1.3.6.1.4.1.9.9.233.1.1.14
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a long unitdata (LUDT) message is received (Q752/9 bis.19).
1.3.6.1.4.1.9.9.233.1.1.15
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a long unitdata (LUDT) service message is received (Q752/9 bis.20).
1.3.6.1.4.1.9.9.233.1.1.16
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a Connection Request(CR) messages sent to MTP. This count include ISDN-UP with embedded CRs (Q752/9 bis.5).
1.3.6.1.4.1.9.9.233.1.1.17
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a Connection Refusal (CREF) message is sent to MTP (Q752/9 bis.6).
1.3.6.1.4.1.9.9.233.1.1.18
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a Connection Reguest messages received from MTP. This count inlcudes ISDN- UP with embedded CRs (Q752/9 bis.7).
1.3.6.1.4.1.9.9.233.1.1.19
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a Connection Refusal (CREF) message is received from MTP (Q752/9 bis.8).
1.3.6.1.4.1.9.9.233.1.1.20
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a Reset Request (RSR) message is sent to MTP (Q752/9 bis.9).
1.3.6.1.4.1.9.9.233.1.1.21
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a Reset Request (RSR) message is received from MTP (Q752/9 bis.10).
1.3.6.1.4.1.9.9.233.1.1.22
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a Error Message (ERR) message is sent to MTP (Q752/9 bis.11).
1.3.6.1.4.1.9.9.233.1.1.23
Counter32 · packets
Reference: ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network Table 9.
This counter is incremented every time a Error Message (ERR) message is received from MTP (Q752/9 bis.12).
1.3.6.1.4.1.9.9.233.1.1.24
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttConPcTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value can be used to prevent unnecessary walks of the Concerned Point Code Table.
1.3.6.1.4.1.9.9.233.1.1.25
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttMapTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value can be used to prevent unnecessary walks of the Mated Application Table.
1.3.6.1.4.1.9.9.233.1.1.26
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttSelTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value can be used to prevent unnecessary walks of the GTT Selector Table.
1.3.6.1.4.1.9.9.233.1.1.27
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttGtaTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value can be used to prevent unnecessary walks of the GTT Global Title Address Table.
1.3.6.1.4.1.9.9.233.1.1.28
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttAppTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value can be used to prevent unnecessary walks of the GTT Application Group Table.
1.3.6.1.4.1.9.9.233.1.1.29
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The SP linkset notification truth value. 'true' Indicates that the cItpSccpGttMapStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that the cItpSccpGttMapStateChange notification generation is disabled.
1.3.6.1.4.1.9.9.233.1.1.30
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpSccpGttPrefTable. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value can be used to prevent unnecessary walks of the GTT Prefix Conversion Table.
1.3.6.1.4.1.9.9.233.1.1.31
TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks
The value of sysUpTime at the time of the last load of the GTT table using file format.
1.3.6.1.4.1.9.9.233.1.1.32
CItpTcTableLoadStatus1 = loadNotRequested2 = loadInProgress3 = loadComplete4 = loadCompleteWithErrors5 = loadFailedThe status of the current or prior load operation. 'loadNotRequested' : load operations have not been requested. 'loadInProgress' : load request is active. 'loadComplete' : load request complete without errors. 'loadCompleteWithErrors' : Load request completed with some type of errors that prevented the adding of one or more entries. 'loadFailed' : Load request failed. · Integer32
The status of the deprecatedload or status from the prior load operation.
1.3.6.1.4.1.9.9.233.1.2.1
Index: cItpSccpGttConPcListName · cItpSccpGttConPointCode
A table of concerned point codes.
1.3.6.1.4.1.9.9.233.1.2.1.1.1
CItpSccpConPcListNameThe configured name associated with SCCP GTT Concerned Point Code list name. SIZE (0..12) · OCTET STRING
The name of the Concerned Point Code list.
1.3.6.1.4.1.9.9.233.1.2.1.1.2
CItpTcPointCodeThe SS7 network node address as specified in the following references. The format of the Point code depends on the variant defined in the CgspSS7Variant object as follows. 33222222222211111111110000000000 10987654321098765432109876543210 ANSI: nnnnnnnn - Network cccccccc - Cluster mmmmmmmm - Member ITU: zzz - Zone aaaaaaaa - Area/Network iii - Identifier NTT: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier TTC: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier Note: The China variant has the same format as ANSI. This form of the point-code is not intended for for presentation.Reference: The SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. GF 001-9001 - Technical Specifications of Signalling System No. 7 for National Telephone Network of China. (0..16777216) · Unsigned32
The concerned point code for SCCP GTT.
1.3.6.1.4.1.9.9.233.1.2.1.1.3
Unsigned32 (0..2147483647)
The reference count for this list.
1.3.6.1.4.1.9.9.233.1.3.1
Index: cItpSccpGttMapPc · cItpSccpGttMapSsn
A table of SCCP GTT Mated Application (MAP) entries.
1.3.6.1.4.1.9.9.233.1.3.1.1.1
CItpTcPointCodeThe SS7 network node address as specified in the following references. The format of the Point code depends on the variant defined in the CgspSS7Variant object as follows. 33222222222211111111110000000000 10987654321098765432109876543210 ANSI: nnnnnnnn - Network cccccccc - Cluster mmmmmmmm - Member ITU: zzz - Zone aaaaaaaa - Area/Network iii - Identifier NTT: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier TTC: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier Note: The China variant has the same format as ANSI. This form of the point-code is not intended for for presentation.Reference: The SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. GF 001-9001 - Technical Specifications of Signalling System No. 7 for National Telephone Network of China. (0..16777216) · Unsigned32
The point code for GTT MAP entry.
1.3.6.1.4.1.9.9.233.1.3.1.1.2
CItpTcSubSystemNumberThe SCCP Subsystem Number . A value of zero indicates that a subsystem is not specified. (0 | 2..255) · Unsigned32
The subsystem number (SSN) for GTT MAP entry.
1.3.6.1.4.1.9.9.233.1.3.1.1.3
CItpTcDisplayPCThe Point Code in formatted based on the variant and the customer defined parameters. SIZE (1..12) · OCTET STRING
The MAP point code in display format.
1.3.6.1.4.1.9.9.233.1.3.1.1.4
CItpSccpGttDisplaySSThe subsystem number in display format. SIZE (1..3) · OCTET STRING
The MAP subsystem number in display format.
1.3.6.1.4.1.9.9.233.1.3.1.1.5
CItpSccpGttMapType1 = primary2 = backupThe list of SCCP GTT Mated Application type 'Primary' : The mated application is primary 'Backup' : The mated application is backup. · Integer32
The GTT MAP subsystem type.
1.3.6.1.4.1.9.9.233.1.3.1.1.6
CItpSccpGttMapPcStatus1 = allowed2 = prohibitedThe list of SCCP GTT Mated App point code status 'Allowed' : The mated application is allowed 'Prohibited' : The mated application is prohibited. · Integer32
The GTT MAP point code status.
1.3.6.1.4.1.9.9.233.1.3.1.1.7
CItpSccpGttMapSsStatus1 = allowed2 = prohibitedThe list of SCCP GTT Mated App subssystem status 'Allowed' : The mated application is allowed 'Other' : The mated application is prohibited. · Integer32
The GTT MAP subsystem status.
1.3.6.1.4.1.9.9.233.1.3.1.1.8
CItpSccpGttMultInd1 = solitary2 = shared3 = dominant4 = costThe list of SCCP GTT Multiplicity Indicator 'Solitary' : The application is solitary 'Shared' : The application is shared 'Dominant' : The application is dominant 'Cost' : The application uses cost. · Integer32
The GTT mated application multiplicity indicator.
1.3.6.1.4.1.9.9.233.1.3.1.1.9
CItpTcPointCodeThe SS7 network node address as specified in the following references. The format of the Point code depends on the variant defined in the CgspSS7Variant object as follows. 33222222222211111111110000000000 10987654321098765432109876543210 ANSI: nnnnnnnn - Network cccccccc - Cluster mmmmmmmm - Member ITU: zzz - Zone aaaaaaaa - Area/Network iii - Identifier NTT: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier TTC: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier Note: The China variant has the same format as ANSI. This form of the point-code is not intended for for presentation.Reference: The SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. GF 001-9001 - Technical Specifications of Signalling System No. 7 for National Telephone Network of China. (0..16777216) · Unsigned32
The backup point code for the mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.10
CItpTcSubSystemNumberThe SCCP Subsystem Number . A value of zero indicates that a subsystem is not specified. (0 | 2..255) · Unsigned32
The backup subsystem number for the mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.11
CItpSccpConPcListNameThe configured name associated with SCCP GTT Concerned Point Code list name. SIZE (0..12) · OCTET STRING
The concerned point code list for the mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.12
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The GTT Mated App re-route on congestion truth value. 'true' Re-routing on congestion is enabled. 'false' Re-routing on congestion is disabled.
1.3.6.1.4.1.9.9.233.1.3.1.1.13
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The GTT Mated App Point Code adjacent truth value. 'true' Indicates that MAP PC is adjacent. 'false' Indicates that MAP PC is not adjacent.
1.3.6.1.4.1.9.9.233.1.3.1.1.14
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The GTT MAP last subsystem used truth value. 'true' It is the last used subsystem. 'false' It is not the last used subsystem.
1.3.6.1.4.1.9.9.233.1.3.1.1.15
Counter32 · messages
This counter is incremented every time a message is routed by the GTT Mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.16
Counter32 · messages
This counter is incremented every time a message is re-routed on congestion by the GTT Mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.17
Counter32 · occurrences
This counter is incremented every time a SCCP is unavailable at the GTT Mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.18
Counter32 · occurrences
This counter is incremented every time a point code is unavailable at the GTT Mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.19
Counter32 · occurrences
This counter is incremented every time a subsystem is unavailable at the GTT Mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.20
Counter32 · occurrences
This counter is incremented every time a point code is congested at the GTT Mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.21
Counter32 · occurrences
This counter is incremented every time a subsystem is congested at the GTT Mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.22
Counter32 · occurrences
This counter is incremented every time a the MTP3 layer failed at the GTT Mated Application.
1.3.6.1.4.1.9.9.233.1.3.1.1.23
Unsigned32 (0..2147483647)
The reference count for this MAP entry.
1.3.6.1.4.1.9.9.233.1.3.1.1.24
CItpSccpGttMapCongStatus1 = notCong2 = congLevel13 = congLevel24 = congLevel3The list of SCCP GTT Mated App congestion status 'NotCong' : The point code not congested 'CongLevel1' : The congestion level 1 'CongLevel2' : The congestion level 2 'CongLevel3' : The congestion level 3. · Integer32
The status of congestion level for this MAP point code.
1.3.6.1.4.1.9.9.233.1.4.1
Index: cItpSccpGttSelTT · cItpSccpGttSelNAI · cItpSccpGttSelNP · cItpSccpGttSelGTI
A table of SCCP GTT Selector entries.
1.3.6.1.4.1.9.9.233.1.4.1.1.1
CItpSccpGttTransTypeThe SCCP GTT Translation Type (TT). (0..255) · Unsigned32
Translation Type (TT) for this GTT Selector.
1.3.6.1.4.1.9.9.233.1.4.1.1.2
CItpTcNAIThe SCCP GTT Network Address Indicator (NAI). The following values are generally used: Unknown Nature of Address (0), Subscriber Number (1), Reserved for national use (2), National Significant Number (3), International Number (4), Maximum NAI (127), Invalid NAI (253), Wild NAI (254). (0..255) · Integer32
Nature of Address Indicator (NAI) for GTT Selector.
1.3.6.1.4.1.9.9.233.1.4.1.1.3
CItpTcNumberingPlanThe SCCP GTT Numbering Plan (NP). The following values are generally used: Unknown NP (0), ISDN/Telephony NP (1), Spare (2), Data NP (3), Telex NP (4), Maritime Mobile NP (5), Land Mobile NP (6), ISDN/Mobile NP (7), Private NP (8). Max NP (15), Invalid NP (253), Wild NP (254). (0..255) · Integer32
Numbering Plan (NP) for this GTT Selector.
1.3.6.1.4.1.9.9.233.1.4.1.1.4
CItpSccpGttGlobalTitleIndThe SCCP GTT Global Title Indicator (GTI). The following values are generally used: No global title included (0), For ITU, GT includes NAI only (1), For ANSI, GT includes TT, NP and encoding scheme (1), GT includes only TT (2), GT includes TT, NP and encoding scheme (3), GT includes TT, NP, encoding scheme, NAI (4), Maximum GTI (15), Invalid GTI (253), Wild GTI (254).Reference: The Global Title Indicator is defined in the International Telecommunication Union standard Q.713: Specifications of Signalling System No. 7 - Signalling Connection Control Part (SCCP) section 3.4.1 Address Indicator. (0..255) · Unsigned32
Global Title Indicator (GTI) for this GTT Selector.
1.3.6.1.4.1.9.9.233.1.4.1.1.5
CItpSccpGttSelNameThe configured name associated with SCCP GTT Selector. SIZE (1..12) · OCTET STRING
The name of the GTT selector.
1.3.6.1.4.1.9.9.233.1.4.1.1.6
Counter32
This counter is incremented every time a global title translations is performed using this GTT Selector.
1.3.6.1.4.1.9.9.233.1.4.1.1.7
Counter32
This counter is incremented every time a global title title translations was required and a selector was not found.
1.3.6.1.4.1.9.9.233.1.4.1.1.8
CItpSccpGttQOSThe SCCP GTT Quality of Service (QOS). (0..255) · Unsigned32
The SCCP GTT Selector specifies the QOS.
1.3.6.1.4.1.9.9.233.1.4.1.1.9
Unsigned32 (0..2147483647)
The reference count for this GTT Selector.
1.3.6.1.4.1.9.9.233.1.4.1.1.10
CItpSccpGttPrefNameThe configured name associated with SCCP GTT Prefix Conversion table. This name is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided. SIZE (0..12) · OCTET STRING
The Prefix Conversion Table is used to convert GTA digits. This object specifies that the conversion occurs 'before' global title translation.
1.3.6.1.4.1.9.9.233.1.4.1.1.11
CItpSccpGttPrefNameThe configured name associated with SCCP GTT Prefix Conversion table. This name is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided. SIZE (0..12) · OCTET STRING
The Prefix Conversion Table is used to convert GTA digits. This object specifies that the conversion occurs 'after' global title translation.
1.3.6.1.4.1.9.9.233.1.5.1
Index: cItpSccpGttGtaTT · cItpSccpGttGtaNAI · cItpSccpGttGtaNP · cItpSccpGttGtaGTI · cItpSccpGttGtaAddr
A table of SCCP Global Title Address entries.
1.3.6.1.4.1.9.9.233.1.5.1.1.1
CItpSccpGttTransTypeThe SCCP GTT Translation Type (TT). (0..255) · Unsigned32
Translation Type (TT) for this Global Title Address.
1.3.6.1.4.1.9.9.233.1.5.1.1.2
CItpTcNAIThe SCCP GTT Network Address Indicator (NAI). The following values are generally used: Unknown Nature of Address (0), Subscriber Number (1), Reserved for national use (2), National Significant Number (3), International Number (4), Maximum NAI (127), Invalid NAI (253), Wild NAI (254). (0..255) · Integer32
Nature of Address Indicator (NAI) for Global Title Address.
1.3.6.1.4.1.9.9.233.1.5.1.1.3
CItpTcNumberingPlanThe SCCP GTT Numbering Plan (NP). The following values are generally used: Unknown NP (0), ISDN/Telephony NP (1), Spare (2), Data NP (3), Telex NP (4), Maritime Mobile NP (5), Land Mobile NP (6), ISDN/Mobile NP (7), Private NP (8). Max NP (15), Invalid NP (253), Wild NP (254). (0..255) · Integer32
Numbering Plan (NP) for this Global Title Address.
1.3.6.1.4.1.9.9.233.1.5.1.1.4
CItpSccpGttGlobalTitleIndThe SCCP GTT Global Title Indicator (GTI). The following values are generally used: No global title included (0), For ITU, GT includes NAI only (1), For ANSI, GT includes TT, NP and encoding scheme (1), GT includes only TT (2), GT includes TT, NP and encoding scheme (3), GT includes TT, NP, encoding scheme, NAI (4), Maximum GTI (15), Invalid GTI (253), Wild GTI (254).Reference: The Global Title Indicator is defined in the International Telecommunication Union standard Q.713: Specifications of Signalling System No. 7 - Signalling Connection Control Part (SCCP) section 3.4.1 Address Indicator. (0..255) · Unsigned32
Global Title Indicator (GTI) for this Global Title Address.
1.3.6.1.4.1.9.9.233.1.5.1.1.5
CItpTcGtaAddrThe configured digits in the SCCP GTT Global Title Address. An octet string specified by an administrator must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (8) · OCTET STRING
The Global Title Address is 8 octets of the Called Party Address (CDPA).
1.3.6.1.4.1.9.9.233.1.5.1.1.6
CItpTcGtaDisplayThe configured digits in the SCCP GTT Global Title Address. It consists of ASCII representation of GTA hex digits. This textual convention has been deprecated and replaced by CItpTcGtaDisplayZB. SIZE (1..15) · OCTET STRING
The ASCII display string of Global Title Address of 15 hex digits of the Called Party Address (CDPA). This object is deprecated so as to allow a null display string for a 'default' GTA.
1.3.6.1.4.1.9.9.233.1.5.1.1.7
CItpSccpGttGtaAddrLenThe SCCP GTT Global Title Address length. It is now deprecated because GTA address length can also be zero. (1..15) · Unsigned32
The number of hex digits in the Global Title Address of the Called Party Address (CDPA). This object is deprecated so as to allow a GTA address length equal to zero.
1.3.6.1.4.1.9.9.233.1.5.1.1.8
CItpSccpGttSelNameThe configured name associated with SCCP GTT Selector. SIZE (1..12) · OCTET STRING
The Global Title Address selector name from cItpSccpGttSelTable.
1.3.6.1.4.1.9.9.233.1.5.1.1.9
CItpSccpGttGtaResType1 = pc2 = pcssn3 = app4 = asThe list of SCCP GTT Result Type 'pc' : The GTA translates to a point code. 'pcssn' : The GTA translates to a point code and optional SSN 'app' : The GTA translates to a GTT Application Group. 'as' : The GTA translates to an M3UA or SUA Application Server (AS) name. · Integer32
The SCCP Global Title Translation result type.
1.3.6.1.4.1.9.9.233.1.5.1.1.10
CItpTcPointCodeThe SS7 network node address as specified in the following references. The format of the Point code depends on the variant defined in the CgspSS7Variant object as follows. 33222222222211111111110000000000 10987654321098765432109876543210 ANSI: nnnnnnnn - Network cccccccc - Cluster mmmmmmmm - Member ITU: zzz - Zone aaaaaaaa - Area/Network iii - Identifier NTT: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier TTC: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier Note: The China variant has the same format as ANSI. This form of the point-code is not intended for for presentation.Reference: The SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. GF 001-9001 - Technical Specifications of Signalling System No. 7 for National Telephone Network of China. (0..16777216) · Unsigned32
When the GTA translates to a point code, it has a valid point code and cItpSccpGttGtaResType is 'pc'. Otherwise it is zero.
1.3.6.1.4.1.9.9.233.1.5.1.1.11
CItpTcPointCodeThe SS7 network node address as specified in the following references. The format of the Point code depends on the variant defined in the CgspSS7Variant object as follows. 33222222222211111111110000000000 10987654321098765432109876543210 ANSI: nnnnnnnn - Network cccccccc - Cluster mmmmmmmm - Member ITU: zzz - Zone aaaaaaaa - Area/Network iii - Identifier NTT: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier TTC: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier Note: The China variant has the same format as ANSI. This form of the point-code is not intended for for presentation.Reference: The SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. GF 001-9001 - Technical Specifications of Signalling System No. 7 for National Telephone Network of China. (0..16777216) · Unsigned32
When the GTA translates to a point code and an optional ssn, it has a valid point code and cItpSccpGttGtaResType is 'pcssn'. Otherwise it is zero.
1.3.6.1.4.1.9.9.233.1.5.1.1.12
CItpSccpGttAppNameThe configured name associated with SCCP GTT Application Group. SIZE (0..12) · OCTET STRING
When the GTA translates to an application group, it has a valid application group name and cItpSccpGttGtaResType is 'app'.
1.3.6.1.4.1.9.9.233.1.5.1.1.13
CItpTcTranslationType1 = tt2 = ssnThe Translation Type for SCCP GTT GTA specifies Title Translation or Subsystem Number (SSN) 'tt' : The GTT GTA has specified Title Translation 'ssn' : The GTT GTA has specified Subsystem Number. · Integer32
When this object is 'tt', the object cItpSccpGttGtaTTorSSNvalue specifies the SCCP GTT Translation Type (TT). When this object is 'ssn', the object cItpSccpGttGtaTTorSSNvalue specifies the SCCP SubSystem Number (SSN).
1.3.6.1.4.1.9.9.233.1.5.1.1.14
CItpSccpGttRoutingInd1 = ri2gt2 = ri2ssn3 = ssnRI2gt4 = ssnRI2ssn5 = replTT6 = riNotAppl7 = riUndefThe SCCP GTT Routing Indicator 'ri2gt' : Set RI to GT 'ri2ssn' : Set RI to SSN 'ssnRI2ssn' : Replace SSN and set RI to GT 'ssnRI2gt' : Replace SSN and set RI to SSN 'replTT' : Replace the TT 'riNotAppl' : RI is not applicable 'riUndef' : RI is undefined. · Integer32
The SCCP GTT GTA specifies the routing indicator. When cItpSccpGttGtaResType is 'pc' or 'pcssn', this object has a valid routing indicator. When cItpSccpGttGtaResType is 'app' or 'as', the routing indicator is not applicable.
1.3.6.1.4.1.9.9.233.1.5.1.1.15
CItpSccpGttQOSThe SCCP GTT Quality of Service (QOS). (0..255) · Unsigned32
The SCCP GTT GTA specifies the QOS.
1.3.6.1.4.1.9.9.233.1.5.1.1.16
CItpTcGtaDisplayZBThe configured digits in the SCCP GTT Global Title Address. It consists of ASCII representation of GTA hex digits. SIZE (0..15) · OCTET STRING
The ASCII display string of Global Title Address of 15 hex digits of the Called Party Address (CDPA). A zero length string specifies a default GTA value for the selector.
1.3.6.1.4.1.9.9.233.1.5.1.1.17
CItpSccpGttGtaAddrLenZBThe SCCP GTT Global Title Address length. For the default GTA address, the length can be zero. (0..15) · Unsigned32
The number of hex digits in the Global Title Address of the Called Party Address (CDPA). For a default GTA, the address length is zero.
1.3.6.1.4.1.9.9.233.1.5.1.1.18
CItpTcXuaNameThe configured name associated with M3UA/SUA ASP or AS name. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..12) · OCTET STRING
The Application Server (AS) name specified by the GTA. It is valid only when cItpSccpGttGtaResType is 'as'. Otherwise it is a zero length string.
1.3.6.1.4.1.9.9.233.1.5.1.1.19
Unsigned32 (0..255)
This object specifies SCCP GTT Translation Type (TT) value when cItpSccpGttGtaTTorSSN is 'tt'. It specifies SCCP SubSystem Number (SSN) value when cItpSccpGttGtaTTorSSN is 'ssn'. A zero value specifies that the TT or the SSN is not applicable for this GTA entry.
1.3.6.1.4.1.9.9.233.1.6.1
Index: cItpSccpGttAppName · cItpSccpGttAppCost
A table of SCCP GTT Application Group Table entries.
1.3.6.1.4.1.9.9.233.1.6.1.1.1
CItpSccpGttAppNameThe configured name associated with SCCP GTT Application Group. SIZE (0..12) · OCTET STRING
The GTT Application Group name.
1.3.6.1.4.1.9.9.233.1.6.1.1.2
CItpSccpGttAppCostThe cost associated with an entry in SCCP GTT Application Group. (1..8) · Unsigned32
The cost for the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.6.1.1.3
CItpSccpGttAppType1 = pc2 = pcssn3 = asThe list of application types in Application Group 'pc' : The application type is a point code. 'pcssn' : The application type is a point code and subsystem number (SSN). 'as' : The application type is an M3UA or SUA Application Server (AS). · Integer32
The type of the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.6.1.1.4
CItpTcPointCodeThe SS7 network node address as specified in the following references. The format of the Point code depends on the variant defined in the CgspSS7Variant object as follows. 33222222222211111111110000000000 10987654321098765432109876543210 ANSI: nnnnnnnn - Network cccccccc - Cluster mmmmmmmm - Member ITU: zzz - Zone aaaaaaaa - Area/Network iii - Identifier NTT: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier TTC: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier Note: The China variant has the same format as ANSI. This form of the point-code is not intended for for presentation.Reference: The SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. GF 001-9001 - Technical Specifications of Signalling System No. 7 for National Telephone Network of China. (0..16777216) · Unsigned32
The point code specified by the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.6.1.1.5
CItpTcSubSystemNumberThe SCCP Subsystem Number . A value of zero indicates that a subsystem is not specified. (0 | 2..255) · Unsigned32
The subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cItpSccpGttAppItemType is 'pcssn'. Otherwise it is zero.
1.3.6.1.4.1.9.9.233.1.6.1.1.6
CItpSccpGttRoutingInd1 = ri2gt2 = ri2ssn3 = ssnRI2gt4 = ssnRI2ssn5 = replTT6 = riNotAppl7 = riUndefThe SCCP GTT Routing Indicator 'ri2gt' : Set RI to GT 'ri2ssn' : Set RI to SSN 'ssnRI2ssn' : Replace SSN and set RI to GT 'ssnRI2gt' : Replace SSN and set RI to SSN 'replTT' : Replace the TT 'riNotAppl' : RI is not applicable 'riUndef' : RI is undefined. · Integer32
The routing indicator (RI) specified by the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.6.1.1.7
CItpSccpGttMultInd1 = solitary2 = shared3 = dominant4 = costThe list of SCCP GTT Multiplicity Indicator 'Solitary' : The application is solitary 'Shared' : The application is shared 'Dominant' : The application is dominant 'Cost' : The application uses cost. · Integer32
The multiplicity of the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.6.1.1.8
Unsigned32 (0..2147483647)
The reference count for the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.7.1
Index: cItpSccpGttAppGrName · cItpSccpGttAppGrCost · cItpSccpGttAppGrEntNum
A table of SCCP GTT Application Group Table entries.
1.3.6.1.4.1.9.9.233.1.7.1.1.1
CItpSccpGttAppNameThe configured name associated with SCCP GTT Application Group. SIZE (0..12) · OCTET STRING
The GTT Application Group name.
1.3.6.1.4.1.9.9.233.1.7.1.1.2
CItpSccpGttAppCostThe cost associated with an entry in SCCP GTT Application Group. (1..8) · Unsigned32
The cost for the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.7.1.1.3
Unsigned32 (0..65535)
The entry number for the same cost for the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.7.1.1.4
CItpSccpGttAppType1 = pc2 = pcssn3 = asThe list of application types in Application Group 'pc' : The application type is a point code. 'pcssn' : The application type is a point code and subsystem number (SSN). 'as' : The application type is an M3UA or SUA Application Server (AS). · Integer32
The type of the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.7.1.1.5
CItpTcPointCodeThe SS7 network node address as specified in the following references. The format of the Point code depends on the variant defined in the CgspSS7Variant object as follows. 33222222222211111111110000000000 10987654321098765432109876543210 ANSI: nnnnnnnn - Network cccccccc - Cluster mmmmmmmm - Member ITU: zzz - Zone aaaaaaaa - Area/Network iii - Identifier NTT: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier TTC: zzzzz - Zone aaaa - Area/Network iiiiiii - Identifier Note: The China variant has the same format as ANSI. This form of the point-code is not intended for for presentation.Reference: The SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. GF 001-9001 - Technical Specifications of Signalling System No. 7 for National Telephone Network of China. (0..16777216) · Unsigned32
The point code specified by the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.7.1.1.6
CItpTcSubSystemNumberThe SCCP Subsystem Number . A value of zero indicates that a subsystem is not specified. (0 | 2..255) · Unsigned32
The subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cItpSccpGttAppItemType is 'pcssn'. Otherwise it is zero.
1.3.6.1.4.1.9.9.233.1.7.1.1.7
CItpSccpGttRoutingInd1 = ri2gt2 = ri2ssn3 = ssnRI2gt4 = ssnRI2ssn5 = replTT6 = riNotAppl7 = riUndefThe SCCP GTT Routing Indicator 'ri2gt' : Set RI to GT 'ri2ssn' : Set RI to SSN 'ssnRI2ssn' : Replace SSN and set RI to GT 'ssnRI2gt' : Replace SSN and set RI to SSN 'replTT' : Replace the TT 'riNotAppl' : RI is not applicable 'riUndef' : RI is undefined. · Integer32
The routing indicator (RI) specified by the item in the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.7.1.1.8
CItpSccpGttMultInd1 = solitary2 = shared3 = dominant4 = costThe list of SCCP GTT Multiplicity Indicator 'Solitary' : The application is solitary 'Shared' : The application is shared 'Dominant' : The application is dominant 'Cost' : The application uses cost. · Integer32
The multiplicity of the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.7.1.1.9
Unsigned32 (0..2147483647)
The reference count for the GTT Application Group.
1.3.6.1.4.1.9.9.233.1.7.1.1.10
CItpTcXuaNameThe configured name associated with M3UA/SUA ASP or AS name. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (0..12) · OCTET STRING
The Application Server (AS) name specified by the item in the GTT Application Group. It is valid only when cItpSccpGttAppGrItemType is 'as'. Otherwise it is a zero length string.
1.3.6.1.4.1.9.9.233.1.7.1.1.11
CItpTcSubSystemNumberThe SCCP Subsystem Number . A value of zero indicates that a subsystem is not specified. (0 | 2..255) · Unsigned32
The new subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cItpSccpGttAppGrItemType is 'as'. Otherwise it is zero.
1.3.6.1.4.1.9.9.233.1.7.1.1.12
Counter32
The number of times this item in the GTT Application Group is used successfully.
1.3.6.1.4.1.9.9.233.1.8.1
Index: cItpSccpGttPrefName · cItpSccpGttPrefInAddr
A table of SCCP GTT Prefix Conversion Table entries. When a packet with GTA is received, it may need global title translation depending on Translation Type (TT), Numbering Plan (NP), Network Address Indicator (NAI) and Global Title Indicator (GTI) present in the packet. To perform the translation a selector (cItpSccpGttSelTable) corresponding to TT, NP, NAI and GTI is used. The selector also specifies prefix conversion of the GTA before (pre) performing the global title translation or after (post) performing the global title translation. A selector can specify any or both (pre and post) prefix conversion tables. The prefix conversion involves matching of GTA digits in the cItpSccpGttPrefInAddr and then replacing those digits with the digits in cItpSccpGttPrefOutAddr.
1.3.6.1.4.1.9.9.233.1.8.1.1.1
CItpSccpGttPrefNameThe configured name associated with SCCP GTT Prefix Conversion table. This name is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided. SIZE (0..12) · OCTET STRING
The GTT Prefix Conversion table name.
1.3.6.1.4.1.9.9.233.1.8.1.1.2
CItpTcGtaAddrThe configured digits in the SCCP GTT Global Title Address. An octet string specified by an administrator must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (8) · OCTET STRING
If the GTA of the Called Party Address (CDPA) matches the digits in this object, then the prefix conversion is performed.
1.3.6.1.4.1.9.9.233.1.8.1.1.3
CItpTcGtaAddrThe configured digits in the SCCP GTT Global Title Address. An octet string specified by an administrator must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space. SIZE (8) · OCTET STRING
If the GTA of the Called Party Address (CDPA) matches the digits in cItpSccpGttPrefInAddr then this object is used in the prefix conversion.
1.3.6.1.4.1.9.9.233.1.8.1.1.4
CItpTcNAIThe SCCP GTT Network Address Indicator (NAI). The following values are generally used: Unknown Nature of Address (0), Subscriber Number (1), Reserved for national use (2), National Significant Number (3), International Number (4), Maximum NAI (127), Invalid NAI (253), Wild NAI (254). (0..255) · Integer32
Nature of Address Indicator (NAI) for the Prefix Conversion Table.
1.3.6.1.4.1.9.9.233.1.8.1.1.5
CItpTcNumberingPlanThe SCCP GTT Numbering Plan (NP). The following values are generally used: Unknown NP (0), ISDN/Telephony NP (1), Spare (2), Data NP (3), Telex NP (4), Maritime Mobile NP (5), Land Mobile NP (6), ISDN/Mobile NP (7), Private NP (8). Max NP (15), Invalid NP (253), Wild NP (254). (0..255) · Integer32
Numbering Plan (NP) for the Prefix Conversion Table.
1.3.6.1.4.1.9.9.233.1.8.1.1.6
CItpTcNAIThe SCCP GTT Network Address Indicator (NAI). The following values are generally used: Unknown Nature of Address (0), Subscriber Number (1), Reserved for national use (2), National Significant Number (3), International Number (4), Maximum NAI (127), Invalid NAI (253), Wild NAI (254). (0..255) · Integer32
Nature of Address Indicator (NAI) for the deprecated item in this Prefix Conversion Table.
1.3.6.1.4.1.9.9.233.1.8.1.1.7
CItpTcNumberingPlanThe SCCP GTT Numbering Plan (NP). The following values are generally used: Unknown NP (0), ISDN/Telephony NP (1), Spare (2), Data NP (3), Telex NP (4), Maritime Mobile NP (5), Land Mobile NP (6), ISDN/Mobile NP (7), Private NP (8). Max NP (15), Invalid NP (253), Wild NP (254). (0..255) · Integer32
Numbering Plan (NP) for the deprecateditem in this Prefix Conversion Table.
1.3.6.1.4.1.9.9.233.0.0.1
The notification generated when a mated application subsystem changes to a new state. The value of cItpSccpGttMapSsStatus indicates the new state for the subsystem.
1.3.6.1.4.1.9.9.232.1.1.2
CItpTcCLLICommon Language Location Codes (CLLI Codes). An 11-character standardized geographic identifier that uniquely identifies the geographic location of telecommunication equipment. The CLLI code is supported as octet string containing administrative information in human-readable form. The use of control codes should be avoided. The use of newline should be avoided. The use of leading or trailing white space should be avoided.Reference: Complete listings of geographical and geopolitical codes can be found in the BR 751-401-xxx series and BR 751-100-055, respectively. SIZE (0..11) · OCTET STRING
Common Language Location Codes (CLLI Codes).
1.3.6.1.4.1.9.9.232.1.1.3
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..30) · OCTET STRING · hint 255t
A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.
1.3.6.1.4.1.9.9.233.1.3.1.1.3
CItpTcDisplayPCThe Point Code in formatted based on the variant and the customer defined parameters. SIZE (1..12) · OCTET STRING
The MAP point code in display format.
1.3.6.1.4.1.9.9.233.1.3.1.1.4
CItpSccpGttDisplaySSThe subsystem number in display format. SIZE (1..3) · OCTET STRING
The MAP subsystem number in display format.
1.3.6.1.4.1.9.9.233.1.3.1.1.7
CItpSccpGttMapSsStatus1 = allowed2 = prohibitedThe list of SCCP GTT Mated App subssystem status 'Allowed' : The mated application is allowed 'Other' : The mated application is prohibited. · Integer32
The GTT MAP subsystem status.