2007-02-15
This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be considered as a single VLAN. These separate networks are connected via an ISP, which will tunnel the packets from one network to another, making it appear as if the two networks are actually just one.
Download CISCO-L2-TUNNEL-CONFIG-MIB.txt Open CISCO-L2-TUNNEL-CONFIG-MIB.txt in a new tab
SCALARS (5) · TABLES (6) · TRAPS (3)
| Name | OID |
|---|---|
| cltcTunnelDropThresholdExceeded | 1.3.6.1.4.1.9.9.246.2.0.1 |
| cltcTunnelShutdownThresholdExceeded | 1.3.6.1.4.1.9.9.246.2.0.2 |
| cltcTunnelSysDropThresholdExceeded | 1.3.6.1.4.1.9.9.246.2.0.3 |
END OF TOC
1.3.6.1.4.1.9.9.246.1.1.1
QosLayer2CosAn integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values. (0..7) · Integer32
Specifies the user priority of the tunneled PDUs and applies to all ingress tunneling interfaces.
1.3.6.1.4.1.9.9.246.1.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates whether the system will generate the cltcTunnelDropThresholdExceeded and cltcTunnelShutdownThresholdExceeded notifications.
1.3.6.1.4.1.9.9.246.1.1.3
Unsigned32 · PDUs/sec
This object specifies the drop threshold at the system level. A value of zero indicates that system level rate limiting is disabled.
1.3.6.1.4.1.9.9.246.1.1.4
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object specifies whether the system will generate the cltcTunnelSysDropThresholdExceeded notification.
1.3.6.1.4.1.9.9.246.1.6.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object controls if dot1q-all-tagged feature is enabled in the managed system.
1.3.6.1.4.1.9.9.246.1.2.1
Index: ifIndex
This table contains information about the dot1q tunnel interfaces. Only dot1q tunneling capable interfaces are shown. 1Q-in-1Q will allow service providers to separate the traffic of various customers within their infrastructure while the customers appear to be on the same VLANs.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.246.1.2.1.1.1
INTEGER1 = enabled2 = disabled · Integer32
Indicates the dot1q tunnel mode of the interface. Setting the interface to dot1q tunnel 'disabled' mode causes the dot1q tunnel feature to be disabled on this interface. Setting the interface to dot1q tunnel 'enabled' mode causes the dot1q tunnel feature to be enabled on this interface.
1.3.6.1.4.1.9.9.246.1.3.1
Index: ifIndex
This table contains information about the protocols being tunneled. Only tunneled protocol filtering capable interfaces are shown.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.246.1.3.1.1.1
BITS
Indicates tunneled protocol of the interface. If a BIT is set, then the value of the corresponding protocol is tunneled. Specifically, if the 'cdp(0)' BIT is set, then the Cisco Discovery Protocol PDU is tunneled; if the 'vtp(1)' BIT is set, then the VLAN Trunking Protocol PDU is tunneled; if the 'stp(2)' BIT is set, then the Spanning Tree Protocol PDU is tunneled; if the 'eoam(3)' BIT is set, then the ethernet Operation, Administration and Maintenance PDU is tunneled; if the 'lldp(4)' BIT is set, then the Link Layer Discovery Protocol is tunneled. If the bit for a given protocol is set for an interface, then the statistics for that interface and protocol will start to be monitored.
1.3.6.1.4.1.9.9.246.1.4.1
Index: ifIndex · cltcTunnelThresholdProtocolIndex
This table contains information about the thresholds for protocol tunneling. Only tunneled protocol filtering capable interfaces are shown. The objects will be on a per interface, per protocol basis.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.246.1.4.1.1.1
INTEGER1 = all2 = cdp3 = vtp4 = stp5 = eoam6 = lldp · Integer32
A tunneled protocol of an interface. - all(1) is supported for devices which allow the setting of thresholds on a per interface basis. This threshold is a combined threshold for the interface which includes all supported protocols. - cdp(2), vtp(3), stp(4), eoam(5) and lldp(6) are supported for devices which allow the setting of thresholds on a per interface, per protocol basis.
1.3.6.1.4.1.9.9.246.1.4.1.1.2
Unsigned32 · PDUs/sec
The drop threshold on an interface for a given protocol. After reaching this drop threshold, the interface will start dropping PDUs for the given protocol. This value cannot be greater than the value of cltcTunnelShutdownThreshold. A value of 0 indicates that no limit is set.
1.3.6.1.4.1.9.9.246.1.4.1.1.3
Unsigned32 · PDUs/sec
The shutdown threshold on an interface for a given protocol. After reaching the shutdown threshold, the interface will shutdown for the given protocol. This value cannot be less than the value of cltcTunnelDropThreshold. A value of 0 indicates that no limit is set.
1.3.6.1.4.1.9.9.246.1.5.1
Index: ifIndex · cltcTunneledProtocolIndex
This table contains protocol tunneling statistics on the interface.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.246.1.5.1.1.1
INTEGER2 = cdp3 = vtp4 = stp5 = eoam6 = lldp · Integer32
A tunneled protocol of an interface.
1.3.6.1.4.1.9.9.246.1.5.1.1.2
Counter32 · encapsulated PDUs
The tunneled PDU encapsulation statistics of an interface. These statistics cover the number of tunneled ingress PDUs.
1.3.6.1.4.1.9.9.246.1.5.1.1.3
Counter32 · de-encapsulated PDUs
The tunneled PDU de-encapsulation statistics of an interface. These statistics cover the number of tunneled egress PDUs.
1.3.6.1.4.1.9.9.246.1.5.1.1.4
Counter32 · PDUs
The number of PDUs dropped on an interface for a given protocol. The PDUs will be dropped when the cltcTunnelDropThreshold is reached.
1.3.6.1.4.1.9.9.246.1.5.2
Index: cltcTunneledProtocolIndex
This table contains protocol tunneling drop statistics.
1.3.6.1.4.1.9.9.246.1.5.2.1.1
Counter32 · encapsulated PDUs
The number of tunneled ingress PDUs that have been dropped.
1.3.6.1.4.1.9.9.246.1.6.2
Index: ifIndex
This table contains information about the dot1q-all-tagged feature's configuration of capable interfaces in the system.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.246.1.6.2.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object specifies whether dot1q-all-tagged feature has been enabled on a specific interface.
1.3.6.1.4.1.9.9.246.2.0.1
This notification is generated when the cltcTunnelDropThreshold has been exceeded.
1.3.6.1.4.1.9.9.246.1.4.1.1.2
Unsigned32 · PDUs/sec
The drop threshold on an interface for a given protocol. After reaching this drop threshold, the interface will start dropping PDUs for the given protocol. This value cannot be greater than the value of cltcTunnelShutdownThreshold. A value of 0 indicates that no limit is set.
1.3.6.1.4.1.9.9.246.2.0.2
This notification is generated when the cltcTunnelShutdownThreshold has been exceeded.
1.3.6.1.4.1.9.9.246.1.4.1.1.3
Unsigned32 · PDUs/sec
The shutdown threshold on an interface for a given protocol. After reaching the shutdown threshold, the interface will shutdown for the given protocol. This value cannot be less than the value of cltcTunnelDropThreshold. A value of 0 indicates that no limit is set.
1.3.6.1.4.1.9.9.246.2.0.3
This notification is generated when the cltcTunnelSysDropThreshold has been exceeded.
1.3.6.1.4.1.9.9.246.1.1.3
Unsigned32 · PDUs/sec
This object specifies the drop threshold at the system level. A value of zero indicates that system level rate limiting is disabled.