2004-08-16
The MIB module for the managment of Cisco Latitude MeetingPlace conferencing solution. MeetignPlace MIB traps are generated under the following conditions. - T1 status - Gateway System Integrity - Major hardware alarm - Minor hardware alarm - Major software alarm - Minor software alarm Each major and minor hardware and software notification includes an integer alarm code that indicates which software module and server reported the alarm. For hardware alarms, four additional codes identify the device type, the device address, slot number, and port number.
Download CISCO-LATITUDE-MIB.txt Open CISCO-LATITUDE-MIB.txt in a new tab
END OF TOC
1.3.6.1.4.1.7185.3.1.3.1
Integer32 (0..254)
MeetingPlace Exception Code. This is the primary code associated with each MeetingPlace exception condition. The mpAlarmDesc OID will provide a textual description of the exception code. Refer to the MeetingPlace System Managers Guide for more details.
1.3.6.1.4.1.7185.3.1.3.2
Integer32 (0..254)
MeetingPlace Server Unit Number. This is the unit (server) number of the server that reported the exception.
1.3.6.1.4.1.7185.3.1.3.3
INTEGER1 = mpTemperature2 = mpPowerSupply3 = mpSerialPort4 = mpTapeDrive5 = mpHardDrive6 = mpDisketteDrive7 = mpEthernet8 = mpModem9 = mpSystemMisc10 = mpDSPMSC11 = mpDSPPRC12 = mpT1Blade13 = mpAnalogBlade14 = mpT1Network15 = mpSystemIntegrityCard16 = mpMainMemory17 = mpE1Blade18 = mpE1Network19 = mpVoIPBlade · Integer32
MeetingPlace Hardware Device Code. This defines the class of device that generated a hardware fault. 'mpTemperature' - Temperature Sensor 'mpPowerSupply' - Power Supply 'mpSerialPort' - Serial Port 'mpTapeDrive' - Tape Drive 'mpHardDrive' - Hard Drive 'mpDisketteDrive' - Diskette Drive 'mpEthernet' - Ethernet Port 'mpModem' - Modem Port 'mpSystemMisc' - System Misc 'mpDSPMSC' - Master Switch Controller 'mpDSPPRC' - Port Resource Card 'mpT1Blade' - T1 Blade 'mpAnalogBlade' - Analog Blade 'mpT1Network' - T1 Network Interface 'mpSystemIntegrityCard' - System Integrity Card 'mpMainMemory' - Main Memory 'mpE1Blade' - E1 Blade 'mpE1Network' - E1 Network Interface 'mpVoIPBlade' - VoIP Blade
1.3.6.1.4.1.7185.3.1.3.4
Integer32 (0..254)
MeetingPlace Hardware Device Unit Number. This is the unit number of the hardware device that generated a fault. For a disk this would be the SCSI ID. For a blade this would the the logical card number as defined in the system configuration.
1.3.6.1.4.1.7185.3.1.3.5
Integer32 (0..254)
MeetingPlace Hardware Device Slot Number. This is the location of the hardware device that generated a fault. For a blade this would be the slot number.
1.3.6.1.4.1.7185.3.1.3.6
Integer32 (0..254)
MeetingPlace Hardware Device Port Number. This is the logical port number associated with a hardware fault. For a T1 alarm, this is the logical span number.
1.3.6.1.4.1.7185.3.1.3.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..128) · OCTET STRING · hint 255a
MeetingPlace Alarm Description. This is a one-line text description of the exception condition. It comprises a string indexed by the exception code filled in with context-specific values.
1.3.6.1.4.1.7185.3.1.3.0.1
MeetingPlace T1 Down Alarm. This indicates generically there is a problem with a telephony port. There are several possible alarm conditions that will generate this trap. This is from Release 4.3.
1.3.6.1.4.1.7185.3.1.3.0.2
MeetingPlace Gateway Alarm. This indicates an alarm generated by a MeetingPlace gateway. There are several alarms that will generate this trap. This is from Release 4.3
1.3.6.1.4.1.7185.3.1.3.0.3
MeetingPlace Major Hardware Alarm. This is generated any time MeetingPlace reports a major hardware alarm.
1.3.6.1.4.1.7185.3.1.3.1
Integer32 (0..254)
MeetingPlace Exception Code. This is the primary code associated with each MeetingPlace exception condition. The mpAlarmDesc OID will provide a textual description of the exception code. Refer to the MeetingPlace System Managers Guide for more details.
1.3.6.1.4.1.7185.3.1.3.2
Integer32 (0..254)
MeetingPlace Server Unit Number. This is the unit (server) number of the server that reported the exception.
1.3.6.1.4.1.7185.3.1.3.3
INTEGER1 = mpTemperature2 = mpPowerSupply3 = mpSerialPort4 = mpTapeDrive5 = mpHardDrive6 = mpDisketteDrive7 = mpEthernet8 = mpModem9 = mpSystemMisc10 = mpDSPMSC11 = mpDSPPRC12 = mpT1Blade13 = mpAnalogBlade14 = mpT1Network15 = mpSystemIntegrityCard16 = mpMainMemory17 = mpE1Blade18 = mpE1Network19 = mpVoIPBlade · Integer32
MeetingPlace Hardware Device Code. This defines the class of device that generated a hardware fault. 'mpTemperature' - Temperature Sensor 'mpPowerSupply' - Power Supply 'mpSerialPort' - Serial Port 'mpTapeDrive' - Tape Drive 'mpHardDrive' - Hard Drive 'mpDisketteDrive' - Diskette Drive 'mpEthernet' - Ethernet Port 'mpModem' - Modem Port 'mpSystemMisc' - System Misc 'mpDSPMSC' - Master Switch Controller 'mpDSPPRC' - Port Resource Card 'mpT1Blade' - T1 Blade 'mpAnalogBlade' - Analog Blade 'mpT1Network' - T1 Network Interface 'mpSystemIntegrityCard' - System Integrity Card 'mpMainMemory' - Main Memory 'mpE1Blade' - E1 Blade 'mpE1Network' - E1 Network Interface 'mpVoIPBlade' - VoIP Blade
1.3.6.1.4.1.7185.3.1.3.4
Integer32 (0..254)
MeetingPlace Hardware Device Unit Number. This is the unit number of the hardware device that generated a fault. For a disk this would be the SCSI ID. For a blade this would the the logical card number as defined in the system configuration.
1.3.6.1.4.1.7185.3.1.3.5
Integer32 (0..254)
MeetingPlace Hardware Device Slot Number. This is the location of the hardware device that generated a fault. For a blade this would be the slot number.
1.3.6.1.4.1.7185.3.1.3.6
Integer32 (0..254)
MeetingPlace Hardware Device Port Number. This is the logical port number associated with a hardware fault. For a T1 alarm, this is the logical span number.
1.3.6.1.4.1.7185.3.1.3.0.4
MeetingPlace Minor Hardware Alarm. This is generated any time MeetingPlace reports a minor hardware alarm.
1.3.6.1.4.1.7185.3.1.3.1
Integer32 (0..254)
MeetingPlace Exception Code. This is the primary code associated with each MeetingPlace exception condition. The mpAlarmDesc OID will provide a textual description of the exception code. Refer to the MeetingPlace System Managers Guide for more details.
1.3.6.1.4.1.7185.3.1.3.2
Integer32 (0..254)
MeetingPlace Server Unit Number. This is the unit (server) number of the server that reported the exception.
1.3.6.1.4.1.7185.3.1.3.3
INTEGER1 = mpTemperature2 = mpPowerSupply3 = mpSerialPort4 = mpTapeDrive5 = mpHardDrive6 = mpDisketteDrive7 = mpEthernet8 = mpModem9 = mpSystemMisc10 = mpDSPMSC11 = mpDSPPRC12 = mpT1Blade13 = mpAnalogBlade14 = mpT1Network15 = mpSystemIntegrityCard16 = mpMainMemory17 = mpE1Blade18 = mpE1Network19 = mpVoIPBlade · Integer32
MeetingPlace Hardware Device Code. This defines the class of device that generated a hardware fault. 'mpTemperature' - Temperature Sensor 'mpPowerSupply' - Power Supply 'mpSerialPort' - Serial Port 'mpTapeDrive' - Tape Drive 'mpHardDrive' - Hard Drive 'mpDisketteDrive' - Diskette Drive 'mpEthernet' - Ethernet Port 'mpModem' - Modem Port 'mpSystemMisc' - System Misc 'mpDSPMSC' - Master Switch Controller 'mpDSPPRC' - Port Resource Card 'mpT1Blade' - T1 Blade 'mpAnalogBlade' - Analog Blade 'mpT1Network' - T1 Network Interface 'mpSystemIntegrityCard' - System Integrity Card 'mpMainMemory' - Main Memory 'mpE1Blade' - E1 Blade 'mpE1Network' - E1 Network Interface 'mpVoIPBlade' - VoIP Blade
1.3.6.1.4.1.7185.3.1.3.4
Integer32 (0..254)
MeetingPlace Hardware Device Unit Number. This is the unit number of the hardware device that generated a fault. For a disk this would be the SCSI ID. For a blade this would the the logical card number as defined in the system configuration.
1.3.6.1.4.1.7185.3.1.3.5
Integer32 (0..254)
MeetingPlace Hardware Device Slot Number. This is the location of the hardware device that generated a fault. For a blade this would be the slot number.
1.3.6.1.4.1.7185.3.1.3.6
Integer32 (0..254)
MeetingPlace Hardware Device Port Number. This is the logical port number associated with a hardware fault. For a T1 alarm, this is the logical span number.
1.3.6.1.4.1.7185.3.1.3.0.5
MeetingPlace Major Software Alarm. This is generated any time MeetingPlace reports a major software alarm.
1.3.6.1.4.1.7185.3.1.3.1
Integer32 (0..254)
MeetingPlace Exception Code. This is the primary code associated with each MeetingPlace exception condition. The mpAlarmDesc OID will provide a textual description of the exception code. Refer to the MeetingPlace System Managers Guide for more details.
1.3.6.1.4.1.7185.3.1.3.2
Integer32 (0..254)
MeetingPlace Server Unit Number. This is the unit (server) number of the server that reported the exception.
1.3.6.1.4.1.7185.3.1.3.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..128) · OCTET STRING · hint 255a
MeetingPlace Alarm Description. This is a one-line text description of the exception condition. It comprises a string indexed by the exception code filled in with context-specific values.
1.3.6.1.4.1.7185.3.1.3.0.6
MeetingPlace Minor Software Alarm. This is generated any time MeetingPlace reports a minor hardware alarm.
1.3.6.1.4.1.7185.3.1.3.1
Integer32 (0..254)
MeetingPlace Exception Code. This is the primary code associated with each MeetingPlace exception condition. The mpAlarmDesc OID will provide a textual description of the exception code. Refer to the MeetingPlace System Managers Guide for more details.
1.3.6.1.4.1.7185.3.1.3.2
Integer32 (0..254)
MeetingPlace Server Unit Number. This is the unit (server) number of the server that reported the exception.
1.3.6.1.4.1.7185.3.1.3.7
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..128) · OCTET STRING · hint 255a
MeetingPlace Alarm Description. This is a one-line text description of the exception condition. It comprises a string indexed by the exception code filled in with context-specific values.