2003-03-12
The MIB module for the Cisco Long Reach Ethernet Customer Premise Equipment device information. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS *** CPE - Customer Premise Equipment DSL - Digital Subscriber Loop VDSL - Very High Speed DSL LRE - Long Reach Ethernet
Download CISCO-LRE-CPE-MIB.txt Open CISCO-LRE-CPE-MIB.txt in a new tab
| Name | OID |
|---|---|
| clreCpeDot1dTpFdbTable | 1.3.6.1.4.1.9.9.340.1.1.1 |
| clreCpePortTable | 1.3.6.1.4.1.9.9.340.1.2.1 |
END OF TOC
1.3.6.1.4.1.9.9.340.1.1.1
Index: dot1dTpFdbAddress
A table that supplements the information from the BRIDGE-MIB. The BRIDGE-MIB tracks the MAC address to switch interface mapping in the dot1dTpFdbTable. On the long reach ethernet switch, CPE devices connect to the switch interfaces. Each CPE device has one or more ports. This table maps a MAC address on the switch to an interface associated with a CPE port.
from BRIDGE-MIB
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
Reference: IEEE 802.1D-1998: clause 7.9.1, 7.9.2
A unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.9.9.340.1.1.1.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The value of the instance of the ifIndex object, define in MIB-II, for the interface corresponding to this CPE port. The Forwarding database on the switch tracks a MAC address and its associated switch interface in the dot1dTpFdbTable table. This object adds information about which port on the CPE the MAC address was learnt on.
1.3.6.1.4.1.9.9.340.1.2.1
Index: ifIndex
A list of LRE CPE port entries. The number of entries is determined by the number of Long Reach Ethernet interfaces (to which the CPE attaches) on the switch and the number of Fast Ethernet ports each CPE supports.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.340.1.2.1.1.1
INTEGER1 = up2 = down3 = testing · Integer32
The desired state of the CPE port. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all CPE ports start with clreCpePortAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, clreCpePortAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).
1.3.6.1.4.1.9.9.340.1.2.1.1.2
INTEGER1 = autoDetect10000000 = s10000000100000000 = s100000000 · Integer32
This object controls the speed of this CPE Fast Ethernet port. When set to autoDetect(1), the CPE port negotiates with its peer for the optimum speed, either s10000000(10000000) or s100000000(100000000). If the peer does not support the autoDetect(1) capability, the CPE port speed defaults to s10000000(10000000).
1.3.6.1.4.1.9.9.340.1.2.1.1.3
INTEGER1 = autoDetect2 = fullDuplex3 = halfDuplex · Integer32
This object controls the duplex of this CPE Fast Ethernet port. When set to autoDetect(1), the CPE port negotiates with its peer for the optimum duplex setting, either fullDuplex(2) or halfDuplex(3). If the peer does not support the autoDetect(1) capability, this CPE port's duplex defaults to halfDuplex(3).
1.3.6.1.4.1.9.9.340.1.2.1.1.4
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object configures a CPE Fast Ethernet port as a protected port when its value is set to true. Data traffic is disallowed between two CPE ports configured as protected ports. When the value of this object is set to false, the protected port property of this CPE port is removed. The value of this object can be set to true only on those CPE ports that support the protected port function.Note that the value of this object represents the desired state of the port. The actual state of the port may have a different value.
1.3.6.1.4.1.9.9.340.1.2.1.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
The value represented by this object is the actual protected port state of the CPE port. The object value is true when this CPE port is configured as a protected port. Data packets are not forwarded between two CPE ports configured as protected ports.