This MIB module is used for getting the ifIndex values given physical location and/or logical information. The physical information includes the slot, back-card and physical line, IMA group ID, MFR (Multilink Frame Relay) bundle etc. The logical information includes the logical interface or virtual interface number.
In this MIB back card, bay, line module are used to refer to the back card.
This table contains one or more rows, representing mappings of physical or logical interfaces to ifIndex values.
cmimModuleIndex
1.3.6.1.4.1.351.150.7.1.1.1.1.1
Unsigned32
An index value that uniquely identifies the location of the module or a physical line. It has the information on slot number, back card and physical line number. Following is the mapping used for this object.
Mapping used when cmimIfType is physicalLine(1), atm(3), adjCardApsLine(6), imaGrpAtmPhy(9) and mfrBundle(21)
Bits 0-7 : Ignored
Bits 8-15 : Back Card Number (0 - Ignored, 1-Top Back card
2 - Bottom Back card) Bits 16-23 : Logical slot number Bits 24-31 : Shelf number (1 - Currently, only value 1 is supported)
Mapping used when cmimIfType is set to ds1Inds3(5), sonetVT(8), sonetPath(12), ds3SonetPath(13), atmSonetPath(14), atmDs3SonetPath(15), ds1VTPath(18), ds1Ds3SonetPath(19) and lapd(24)
Bits 0-7 : DS3/E3/Sonet/Sdh physical line number
Bits 8-15 : Back Card Number (0 - Ignored, 1-Top Back card
2 - Bottom Back card. Bits 16-23 : Logical slot number Bits 24-31 : Shelf number (1 - Currently, only value 1 is supported)
Mapping used when cmimIfType is set to propAtm(7), frameRelayPort(16), ces(17), atmVciEndPt(20), ppplink(22) and pppMpbundle(23).
Bits 0-7 : 0 Ignored
Bits 8-15 : 0 Ignored
Bits 16-23 : Logical slot number Bits 24-31 : Shelf number (1 - only value 1 is supported)
Mapping used when cmimIfType is set to srmBertLine(10) or srmBertPort(11)
Bits 0-7 : 0 Ignored
Bits 8-15 : Logical slot number of NBSM
Bits 16-23 : Logical slot number of SRM Bits 24-31 : Shelf number (1 - only value 1 is supported)
cmimIfNumber
1.3.6.1.4.1.351.150.7.1.1.1.1.2
Unsigned32
An index value uniquely identifies the interface number (physical, logical) of the module. The value specified depends on the value specified in cmimIfType.
cmimIfType cmimIfNumber
---------- ------------
physicalLine(1) physical line number
atm(3) physical line number for atm phy
number
ds1Inds3(5) DS1/E1 line number in a DS3/E3
adjCardApsLine(6) adjacent card APS line number
propAtm(7) set to 1, this is the only value
supported at this time
sonetVT(8) DSxN tributary in a sonet/sdh line
imaGrpAtmPhy(9) atm ima group for atm phy number
srmBertLine(10) physical line number of NBSM
srmBertPort(11) logical port number of NBSM.
sonetPath(12) STS-1/AU-3 Path Number
atmSonetPath(14) STS-1/AU-3 Path Number
ds3SonetPath(13) Bits 0..15 : STS-1/AU-3 Path Number
Bits 16..31: 1 for STS-1/AU-3 or DS3 Number within AU-4
atmDs3SonetPath(15) Bits 0..15 : STS-1/AU-3 Path Number
Bits 16..31: 1 for STS-1/AU-3 or DS3 Number within AU-4
frameRelayPort(16) logical port number for frame
interface
ces(17) logical port number of circuit
emulation service interface
ds1InVT(18) Bits 0..7 : VT Number
Bits 8..15: VT group number
Bits 16..31: STS-1/AU-3 Path Number
ds1Ds3SonetPath(19) Bits 0..7 : ds1 Number
Bits 8..15: ds3 Number
Bits 16..31: STS Path Number
atmVciEndPt(20) Bits 0..15 : VCI
Bits 16..27: VPI Bits 28..31: Port(ATM)
mfrBundle(21) Multilink Frame Relay bundle number
ppplink(22) ppp index of the ppp interface
pppMpbundle(23) mpbundle index of the mpbundle
interface
lapd(24) Bits 0..7 : ds0 number
Bits 8..15 : VT number or ds1 number Bits 16..23: VT group (DS3 ignore it) Bits 24..31: STS or DS3 path
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to the INDEXes specified in the table.
Note that the values returned for cmimIfType=srmBertLine(10) and cmimIfType=srmBertPort(11) will not have any entries in the IF-TABLE.