ciscoMrpDomainIndex
1.3.6.1.4.1.9.9.850.1.1.1.1
Unsigned32
The index of the entry
CISCO-MRP-MIB
2017-09-12
The CISCO-MRP-MIB is used to monitor the Media Redundancy Protocol (MRP) domains and notifying their state change. MRP is a recovery protocol based on a ring topology, and the redundant interconnection of MRP rings/domains.
Download CISCO-MRP-MIB.txt Open CISCO-MRP-MIB.txt in a new tab
Tables (1)
| Name | OID |
|---|---|
| ciscoMrpDomainTable | 1.3.6.1.4.1.9.9.850.1.1 |
Traps (1)
| Name | OID |
|---|---|
| ciscoMrpRingOpen | 1.3.6.1.4.1.9.9.850.0.1 |
END OF TOC
Table details
ciscoMrpDomainTable
1.3.6.1.4.1.9.9.850.1.1
Index: ciscoMrpDomainIndex
Every entry in this table contains information about a Media Redundancy Protocol (MRP) domain.
ciscoMrpDomainID
1.3.6.1.4.1.9.9.850.1.1.1.2
OCTET STRING SIZE (16)
Universally unique identifier belongs to the MRP domain which represents a ring. The IEC 61158-5-10 defines the structure of the UUID as a data type numeric identifier 1025.
ciscoMrpDomainName
1.3.6.1.4.1.9.9.850.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A logical name for the MRP domain to ease the management of MRP domains.
ciscoMrpDomainState
1.3.6.1.4.1.9.9.850.1.1.1.4
Unsigned32 (0..2)
Operational status of the MRP entity. undefined(0) Value is not valid. All higher bits are invalid and shall be reset. ringOpen(1) MRP ring redundancy lost. All higher bits are invalid and shall be reset. ringclose(2) MRP ring redundancy achieved. All higher bits are invalid and shall be reset.
Trap details
ciscoMrpRingOpen
1.3.6.1.4.1.9.9.850.0.1
A ciscoMrpRingOpen trap signifies that a specific MRP ring is open.
ciscoMrpDomainID
1.3.6.1.4.1.9.9.850.1.1.1.2
OCTET STRING SIZE (16)
Universally unique identifier belongs to the MRP domain which represents a ring. The IEC 61158-5-10 defines the structure of the UUID as a data type numeric identifier 1025.
ciscoMrpDomainName
1.3.6.1.4.1.9.9.850.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A logical name for the MRP domain to ease the management of MRP domains.
ciscoMrpDomainState
1.3.6.1.4.1.9.9.850.1.1.1.4
Unsigned32 (0..2)
Operational status of the MRP entity. undefined(0) Value is not valid. All higher bits are invalid and shall be reset. ringOpen(1) MRP ring redundancy lost. All higher bits are invalid and shall be reset. ringclose(2) MRP ring redundancy achieved. All higher bits are invalid and shall be reset.