This MIB module defines management objects for monitoring information of Priority-based Flow Control. Deprecated ciscoPfcExtMIBCompliance2, which is replaced by ciscoPfcExtMIBCompliance3.
The following terms are used throughout the MIB:
PFC: Priority Flow Control
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cpfcIfRequests
1.3.6.1.4.1.9.9.813.1.1.1.1
Counter64 (0..18446744073709551615)
A count of the invoked PFC M_CONTROL.request primitives for a particular interface.
cpfcIfIndications
1.3.6.1.4.1.9.9.813.1.1.1.2
Counter64 (0..18446744073709551615)
A count of the received PFC M_CONTROL.indication primitives for a particular interface.
cpfcIfPriorityTable
1.3.6.1.4.1.9.9.813.1.2
Index: ifIndex · cpfcIfPriorityValue
A list of PFC informaton for each PFC priority of each interface in the system capable of providing such information.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cpfcIfPriorityValue
1.3.6.1.4.1.9.9.813.1.2.1.1
Integer32 (0..7)
This object indicates the priority value of the PFC capable interface.
cpfcIfPriorityRequests
1.3.6.1.4.1.9.9.813.1.2.1.2
Counter64 (0..18446744073709551615)
A count of invoked request premitives for a specific PFC priority of a particular interface.
cpfcIfPriorityIndications
1.3.6.1.4.1.9.9.813.1.2.1.3
Counter64 (0..18446744073709551615)
A count of the received indication primitives for a specific PFC priority of a particular interface.
cpfcWatchdogIfQueueInfoTable
1.3.6.1.4.1.9.9.813.1.3
Index: ifIndex · cpfcWatchdogIfQueueNumber
This table provides PFC Watchdog Timer related information for each queue of each watchdog timer capable interface.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cpfcWatchdogIfQueueNumber
1.3.6.1.4.1.9.9.813.1.3.1.1
QosQueueNumberAn integer indicates a queue number. · Unsigned32
This object indicates the queue number of the interface.
This object indicates the state of the PFC queue for the interface.
cpfcWatchdogIfQueueShutdowns
1.3.6.1.4.1.9.9.813.1.3.1.3
Counter64 (0..18446744073709551615)
This object indicates the number of times a given PFC queue was shutdown for the interface.
cpfcWatchdogIfQueueRestores
1.3.6.1.4.1.9.9.813.1.3.1.4
Counter64 (0..18446744073709551615)
This object indicates the number of times a given Priority Flow Control queue was restored for the interface.
cpfcWatchdogIfQueueTotalDropPkts
1.3.6.1.4.1.9.9.813.1.3.1.5
Counter64 (0..18446744073709551615)
This object indicates total number of packets that were dropped due to corrective action for a given PFC queue of the interface.
cpfcWatchdogIfQueueDropPkts
1.3.6.1.4.1.9.9.813.1.3.1.6
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases).
Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects.
This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
This object indicates total number of packets that have been dropped due to corrective action since last shutdown action for a given PFC queue of the interface.
cpfcWatchdogIfQueueDropInPkts
1.3.6.1.4.1.9.9.813.1.3.1.7
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases).
Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects.
This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
This object indicates total number of ingress packets that have been dropped due to corrective action since last shutdown action for a given PFC queue of the interface.
cpfcWatchdogIfQueueTotalDropInPkts
1.3.6.1.4.1.9.9.813.1.3.1.8
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases).
Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects.
This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64
This object indicates total number of ingress packets that have been dropped due to corrective action for a given PFC queue of the interface.
cpfcIfPriorityWaitTable
1.3.6.1.4.1.9.9.813.1.4
Index: ifIndex · cpfcIfPriorityWaitCoS
A collection of objects that provides the time value of the CoS which are paused for each interface.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cpfcIfPriorityWaitCoS
1.3.6.1.4.1.9.9.813.1.4.1.1
Integer32 (0..7)
This object indicates the priority value of the PFC capable interface.
cpfcIfPriorityWaitRx
1.3.6.1.4.1.9.9.813.1.4.1.2
Unsigned64An unsigned 64 bit integer. We use SYNTAX Counter64 for the encoding rules. (0..18446744073709551615) · Counter64 · micro-seconds
This object indicates the time in microseconds for which a link is not transmitting data which indicates the port is in conitnuous pause receiving state.
cpfcIfPriorityWaitTx
1.3.6.1.4.1.9.9.813.1.4.1.3
Unsigned64An unsigned 64 bit integer. We use SYNTAX Counter64 for the encoding rules. (0..18446744073709551615) · Counter64 · micro-seconds
This object indicates the time in microseconds for which a link is not receiving data which indicates the port is in continuous pause transmitting state.