ciscoPrpChannelIndex
1.3.6.1.4.1.9.9.866.1.1.1.1
Unsigned32
Prp table entry index value.
CISCO-PRP-MIB
2019-09-11
Parallel Redundancy Protocol (PRP) is defined in the International Standard IEC 62439-3. PRP is designed to provide hitless redundancy (zero recovery time after failures) in Ethernet networks. PRP uses a scheme, where the end nodes implement redundancy (instead of network elements) by connecting two network interfaces to two independent, disjointed, parallel networks (LAN-A and LAN-B). Each of these Dually Attached Nodes (DANs) then have redundant paths to all other DANs in the network.
Download CISCO-PRP-MIB.txt Open CISCO-PRP-MIB.txt in a new tab
Tables (1)
| Name | OID |
|---|---|
| ciscoPrpChannelTable | 1.3.6.1.4.1.9.9.866.1.1 |
Traps (3)
| Name | OID |
|---|---|
| ciscoPrpChannelStateChange | 1.3.6.1.4.1.9.9.866.0.1 |
| ciscoPrpLanAStateChange | 1.3.6.1.4.1.9.9.866.0.2 |
| ciscoPrpLanBStateChange | 1.3.6.1.4.1.9.9.866.0.3 |
END OF TOC
Table details
ciscoPrpChannelTable
1.3.6.1.4.1.9.9.866.1.1
Index: ciscoPrpChannelIndex
Every entry in the table specifies information about the PRP channel.
ciscoPrpChannelId
1.3.6.1.4.1.9.9.866.1.1.1.2
Unsigned32
Specifies the PRP channel id.
ciscoPrpChannelName
1.3.6.1.4.1.9.9.866.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
PRP channel name.
ciscoPrpChannelStatus
1.3.6.1.4.1.9.9.866.1.1.1.4
PrpStatus0 = undefined1 = stateUp2 = stateDownOperational status of the DLR Device. undefined(0) Value is not valid. stateUp(1) PRP channel or LAN state UP. stateDown(2) PRP channel or LAN state DOWN. stateReference: Prp channel or LAN status · Integer32
Operational status of the PRP channel.
ciscoPrpChannelLanAStatus
1.3.6.1.4.1.9.9.866.1.1.1.5
PrpStatus0 = undefined1 = stateUp2 = stateDownOperational status of the DLR Device. undefined(0) Value is not valid. stateUp(1) PRP channel or LAN state UP. stateDown(2) PRP channel or LAN state DOWN. stateReference: Prp channel or LAN status · Integer32
Operational status of the PRP Lan A connection status.
ciscoPrpChannelLanBStatus
1.3.6.1.4.1.9.9.866.1.1.1.6
PrpStatus0 = undefined1 = stateUp2 = stateDownOperational status of the DLR Device. undefined(0) Value is not valid. stateUp(1) PRP channel or LAN state UP. stateDown(2) PRP channel or LAN state DOWN. stateReference: Prp channel or LAN status · Integer32
A ciscoPrpLanBStateChange notification is generated when the value of ciscoPrpChannelLanBStatus is changed to Up or Down. The notification contains information of ciscoPrpChannelId, ciscoPrpChannelName, ciscoPrpChannelLanBStatus.
Trap details
ciscoPrpChannelStateChange
1.3.6.1.4.1.9.9.866.0.1
A ciscoPrpChannelStateChange notification is generated when the value of ciscoPrpChannelStatus is changed to Up or Down. The notification contains information of ciscoPrpChannelId, ciscoPrpChannelName, ciscoPrpChannelStatus.
ciscoPrpChannelId
1.3.6.1.4.1.9.9.866.1.1.1.2
Unsigned32
Specifies the PRP channel id.
ciscoPrpChannelName
1.3.6.1.4.1.9.9.866.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
PRP channel name.
ciscoPrpChannelStatus
1.3.6.1.4.1.9.9.866.1.1.1.4
PrpStatus0 = undefined1 = stateUp2 = stateDownOperational status of the DLR Device. undefined(0) Value is not valid. stateUp(1) PRP channel or LAN state UP. stateDown(2) PRP channel or LAN state DOWN. stateReference: Prp channel or LAN status · Integer32
Operational status of the PRP channel.
ciscoPrpLanAStateChange
1.3.6.1.4.1.9.9.866.0.2
A ciscoPrpLanAStateChange notification is generated when the value of ciscoPrpChannelLanAStatus is changed to Up or Down. The notification contains information of ciscoPrpChannelId, ciscoPrpChannelName, ciscoPrpChannelLanAStatus.
ciscoPrpChannelId
1.3.6.1.4.1.9.9.866.1.1.1.2
Unsigned32
Specifies the PRP channel id.
ciscoPrpChannelName
1.3.6.1.4.1.9.9.866.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
PRP channel name.
ciscoPrpChannelLanAStatus
1.3.6.1.4.1.9.9.866.1.1.1.5
PrpStatus0 = undefined1 = stateUp2 = stateDownOperational status of the DLR Device. undefined(0) Value is not valid. stateUp(1) PRP channel or LAN state UP. stateDown(2) PRP channel or LAN state DOWN. stateReference: Prp channel or LAN status · Integer32
Operational status of the PRP Lan A connection status.
ciscoPrpLanBStateChange
1.3.6.1.4.1.9.9.866.0.3
Object to notify change in Lan B status of a PRP channel.
ciscoPrpChannelId
1.3.6.1.4.1.9.9.866.1.1.1.2
Unsigned32
Specifies the PRP channel id.
ciscoPrpChannelName
1.3.6.1.4.1.9.9.866.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
PRP channel name.
ciscoPrpChannelLanBStatus
1.3.6.1.4.1.9.9.866.1.1.1.6
PrpStatus0 = undefined1 = stateUp2 = stateDownOperational status of the DLR Device. undefined(0) Value is not valid. stateUp(1) PRP channel or LAN state UP. stateDown(2) PRP channel or LAN state DOWN. stateReference: Prp channel or LAN status · Integer32
A ciscoPrpLanBStateChange notification is generated when the value of ciscoPrpChannelLanBStatus is changed to Up or Down. The notification contains information of ciscoPrpChannelId, ciscoPrpChannelName, ciscoPrpChannelLanBStatus.