This class contains a single policy instance that identifies the current incarnation of the PIB and the PDP that installed this incarnation. The instance of this class is reported to the PDP at client connect time so that the PDP can (attempt to) ascertain the current state of the PIB.
qosDeviceIncarnationId
1.3.6.1.4.1.9.18.2.1.2.1.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosDevicePdpName
1.3.6.1.4.1.9.18.2.1.2.1.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The name of the PDP that installed the current incarnation of the PIB into the device. By default it is the zero length string.
qosDevicePibIncarnation
1.3.6.1.4.1.9.18.2.1.2.1.1.3
OCTET STRING SIZE (128)
An octet string to identify the current incarnation. It has meaning to the PDP that installed the PIB and perhaps its standby PDPs. By default the empty string.
qosDevicePibTtl
1.3.6.1.4.1.9.18.2.1.2.1.1.4
Unsigned32
The number of seconds after a client close or TCP timeout for which the PEP continues to enforce the policy in the PIB. After this interval, the PIB is consired expired and the device no longer enforces the policy installed in the PIB.
qosDeviceAttributeTable
1.3.6.1.4.1.9.18.2.1.2.2
Index: qosDeviceAttributeId
The single instance of this class indicates specific attributes of the device. These include configuration values such as the configured PDP addresses, the maximum message size, and specific device capabilities. The latter include input port-based and output port-based classification and/or policing, support for flow based policing, aggregate based policing, traffic shaping capabilities, etc.
qosDeviceAttributeId
1.3.6.1.4.1.9.18.2.1.2.2.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosDevicePepDomain
1.3.6.1.4.1.9.18.2.1.2.2.1.2
DisplayStringRepresents textual information taken from the NVT ASCII
character set, as defined in pages 4, 10-11 of RFC 854.
To summarize RFC 854, the NVT ASCII repertoire specifies:
- the use of character codes 0-127 (decimal)
- the graphics characters (32-126) are interpreted as US ASCII
- NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854
- the other 25 codes have no standard interpretation
- the sequence 'CR LF' means newline
- the sequence 'CR NUL' means carriage-return
- an 'LF' not preceded by a 'CR' means moving to the same column on the next line.
- the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.)
Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
The QoS domain that this device belongs to. This is configured locally on the device (perhaps by some management protocol such as SNMP). By default, it is the zero-length string.
qosDevicePrimaryPdp
1.3.6.1.4.1.9.18.2.1.2.2.1.3
IpAddress SIZE (4)
The address of the PDP configured to be the primary PDP for the device.
qosDeviceSecondaryPdp
1.3.6.1.4.1.9.18.2.1.2.2.1.4
IpAddress SIZE (4)
The address of the PDP configured to be the secondary PDP for the device. An address of zero indicates no secondary is configured.
qosDeviceMaxMessageSize
1.3.6.1.4.1.9.18.2.1.2.2.1.5
Unsigned32
The maximum size message that this PEP is capable of receiving in bytes. A value of zero means that the maximum message size is unspecified (but does not mean it is unlimited). A message greater than this maximum results in a MessageTooBig error on a 'no commit' REP.
qosDeviceCapabilities
1.3.6.1.4.1.9.18.2.1.2.2.1.6
BITS
An enumeration of device capabilities. Used by the PDP to select policies and configuration to push to the PEP.
qosInterfaceTypeTable
1.3.6.1.4.1.9.18.2.1.2.3
Index: qosInterfaceTypeId
This class describes the interface types of the interfaces that exist on the device. It includes the queue type, role combination and capabilities of interfaces. The PEP does not report which specific interfaces have which characteristics.
qosInterfaceTypeId
1.3.6.1.4.1.9.18.2.1.2.3.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosInterfaceQueueType
1.3.6.1.4.1.9.18.2.1.2.3.1.2
QosInterfaceQueueType1 = oneQ1t2 = oneQ2t3 = oneQ4t4 = oneQ8t5 = twoQ1t6 = twoQ2t7 = twoQ4t8 = twoQ8t9 = threeQ1t10 = threeQ2t11 = threeQ4t12 = threeQ8t13 = fourQ1t14 = fourQ2t15 = fourQ4t16 = fourQ8t17 = eightQ1t18 = eightQ2t19 = eightQ4t20 = eightQ8t21 = sixteenQ1t22 = sixteenQ2t23 = sixteenQ4t24 = sixtyfourQ1t25 = sixtyfourQ2t26 = sixtyfourQ4t27 = oneP1Q0t28 = oneP1Q4t29 = oneP1Q8t30 = oneP2Q1t31 = oneP2Q2t32 = oneP3Q1t33 = oneP7Q8t34 = oneP3Q8t35 = sixteenQ8t36 = oneP15Q8t37 = oneP15Q1t38 = oneP7Q1t39 = oneP31Q1t40 = thirtytwoQ1t41 = thirtytwoQ8t42 = oneP31Q8t43 = oneP7Q4t44 = oneP3Q4t45 = oneP7Q2tAn enumerated type for all the known interface types. The interface types are currently limited to a predefined combination of queues and thresholds such that the product of queues and thresholds does not exceed 64 (i.e., the total number of DSCPs. · Integer32
The interface type in terms of number of queues and thresholds.
qosInterfaceTypeRoles
1.3.6.1.4.1.9.18.2.1.2.3.1.3
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
A combination of roles on at least one interface of type qosInterfaceType.
qosInterfaceTypeCapabilities
1.3.6.1.4.1.9.18.2.1.2.3.1.4
QosInterfaceTypeCapabilitiesAn enumeration of interface capabilities. Used by the PDP to select policies and configuration to push to the PEP. · BITS
An enumeration of interface capabilities. Used by the PDP to select policies and configuration to push to the PEP.
qosDiffServMappingTable
1.3.6.1.4.1.9.18.2.1.3.1
Index: qosDscp
Maps each DSCP to a marked-down DSCP. Also maps each DSCP to an IP precedence and QosLayer2Cos. When configured for the first time, all 64 entries of the table must be specified. Thereafter, instances may be modified (with a delete and install in a single decision) but not deleted unless all instances are deleted.
qosDscp
1.3.6.1.4.1.9.18.2.1.3.1.1.1
DscpAn integer that is in the range of the DiffServ codepoint values. (0..63) · Integer32
A DSCP for which this entry contains mappings.
qosMarkedDscp
1.3.6.1.4.1.9.18.2.1.3.1.1.2
DscpAn integer that is in the range of the DiffServ codepoint values. (0..63) · Integer32
The DSCP to use instead of the qosDscp when the packet is out of profile and hence marked as such.
qosL2Cos
1.3.6.1.4.1.9.18.2.1.3.1.1.3
QosLayer2CosAn integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values. (0..7) · Integer32
The L2 CoS value to use when mapping this DSCP to layer 2 CoS.
qosCosToDscpTable
1.3.6.1.4.1.9.18.2.1.3.2
Index: qosCosToDscpCos
Maps each of eight CoS values to a DSCP. When configured for the first time, all 8 entries of the table must be specified. Thereafter, instances may be modified (with a delete and install in a single decision) but not deleted unless all instances are deleted.
qosCosToDscpCos
1.3.6.1.4.1.9.18.2.1.3.2.1.1
QosLayer2CosAn integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values. (0..7) · Integer32
The L2 CoS value that is being mapped.
qosCosToDscpDscp
1.3.6.1.4.1.9.18.2.1.3.2.1.2
DscpAn integer that is in the range of the DiffServ codepoint values. (0..63) · Integer32
The DSCP value to use when mapping the L2 CoS to a DSCP.
qosUnmatchedPolicyTable
1.3.6.1.4.1.9.18.2.1.4.1
Index: qosUnmatchedPolicyId
A policy class that specifies what QoS to apply to a packet that does not match any other policy configured for this role combination for a particular direction of traffic.
qosUnmatchedPolicyId
1.3.6.1.4.1.9.18.2.1.4.1.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosUnmatchedPolicyRole
1.3.6.1.4.1.9.18.2.1.4.1.1.2
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
Role combination for which this instance applies.
qosUnmatchedPolicyDirection
1.3.6.1.4.1.9.18.2.1.4.1.1.3
INTEGER0 = in1 = out · Integer32
The direction of packet flow at the interface in question to which this instance applies.
qosUnmatchedPolicyDscp
1.3.6.1.4.1.9.18.2.1.4.1.1.4
DscpAn integer that is in the range of the DiffServ codepoint values. (0..63) · Integer32
The DSCP to classify the unmatched packet with. This must be specified even if qosUnmatchedPolicyDscpTrusted is true.
qosUnmatchedPolicyDscpTrusted
1.3.6.1.4.1.9.18.2.1.4.1.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored) unless this is a non-IP packet and arrives untagged. The packet is still policed as part of its micro flow and its aggregate flow.
When a trusted action is applied to an input interface, the Dscp (for an IP packet) or CoS (for a non-IP packet) associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing.
qosUnmatchPolMicroFlowPolicerId
1.3.6.1.4.1.9.18.2.1.4.1.1.6
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An index identifying the instance of policer to apply to unmatched packets. It must correspond to the integer index of an instance of class qosPolicerTable or be zero. If zero, the microflow is not policed.
qosUnmatchedPolicyAggregateId
1.3.6.1.4.1.9.18.2.1.4.1.1.7
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and is not policed as part of any aggregate.
qosPolicerTable
1.3.6.1.4.1.9.18.2.1.5.1
Index: qosPolicerId
A class specifying policing parameters for both microflows and aggregate flows. This table is designed for policing according to a token bucket scheme where an average rate and burst size is specified.
qosPolicerId
1.3.6.1.4.1.9.18.2.1.5.1.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosPolicerRate
1.3.6.1.4.1.9.18.2.1.5.1.1.2
Unsigned64An unsigned 64 bit integer. We use SYNTAX Counter64 for the enconding rules. (0..18446744073709551615) · Counter64
The token rate. It is specified in units of bit/s. A rate of zero means that all packets will be out of profile. If the qosPolicerAction is set to drop then this effectively denies any service to packets policed by this policer.
qosPolicerNormalBurst
1.3.6.1.4.1.9.18.2.1.5.1.1.3
Unsigned32
The normal size of a burst in terms of bits.
qosPolicerExcessBurst
1.3.6.1.4.1.9.18.2.1.5.1.1.4
Unsigned32
The excess size of a burst in terms of bits.
qosPolicerAction
1.3.6.1.4.1.9.18.2.1.5.1.1.5
INTEGER0 = drop1 = mark2 = shape · Integer32
An indication of how to handle out of profile packets. When the shape action is chosen then traffic is shaped to the rate specified by qosPolicerRate.
qosAggregateTable
1.3.6.1.4.1.9.18.2.1.5.2
Index: qosAggregateId
Instances of this class identify aggregate flows and the policer to apply to each.
qosAggregateId
1.3.6.1.4.1.9.18.2.1.5.2.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosAggregatePolicerId
1.3.6.1.4.1.9.18.2.1.5.2.1.2
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An index identifying the instance of policer to apply to the aggregate. It must correspond to the integer index of an instance of class qosPolicerTable.
qosMacClassificationTable
1.3.6.1.4.1.9.18.2.1.6.1
Index: qosMacClassificationId
A class of MAC/Vlan tuples and their associated CoS values.
qosMacClassificationId
1.3.6.1.4.1.9.18.2.1.6.1.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosDstMacVlan
1.3.6.1.4.1.9.18.2.1.6.1.1.2
INTEGER (1..4095) · Integer32
The VLAN of the destination MAC address of the L2 frame.
qosDstMacAddress
1.3.6.1.4.1.9.18.2.1.6.1.1.3
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
The destination MAC address of the L2 frame.
qosDstMacCos
1.3.6.1.4.1.9.18.2.1.6.1.1.4
QosLayer2CosAn integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values. (0..7) · Integer32
The CoS to assign the packet with the associated MAC/VLAN tuple. Note that this CoS is overridden by the policies to classify the frame at layer 3 if there are any.
qosIpAceTable
1.3.6.1.4.1.9.18.2.1.7.1
Index: qosIpAceId
ACE definitions.
qosIpAceId
1.3.6.1.4.1.9.18.2.1.7.1.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIpAceDstAddr
1.3.6.1.4.1.9.18.2.1.7.1.1.2
IpAddress SIZE (4)
The IP address to match against the packet's destination IP address.
qosIpAceDstAddrMask
1.3.6.1.4.1.9.18.2.1.7.1.1.3
IpAddress SIZE (4)
A mask for the matching of the destination IP address.
qosIpAceSrcAddr
1.3.6.1.4.1.9.18.2.1.7.1.1.4
IpAddress SIZE (4)
The IP address to match against the packet's source IP address.
qosIpAceSrcAddrMask
1.3.6.1.4.1.9.18.2.1.7.1.1.5
IpAddress SIZE (4)
A mask for the matching of the source IP address.
qosIpAceDscpMin
1.3.6.1.4.1.9.18.2.1.7.1.1.6
DscpAn integer that is in the range of the DiffServ codepoint values. (0..63) · Integer32
The minimum value that the DSCP in the packet can have and match this ACE.
qosIpAceDscpMax
1.3.6.1.4.1.9.18.2.1.7.1.1.7
DscpAn integer that is in the range of the DiffServ codepoint values. (0..63) · Integer32
The maximum value that the DSCP in the packet can have and match this ACE.
qosIpAceProtocol
1.3.6.1.4.1.9.18.2.1.7.1.1.8
INTEGER (0..255) · Integer32
The IP protocol to match against the packet's protocol. A value of zero means match all.
qosIpAceDstL4PortMin
1.3.6.1.4.1.9.18.2.1.7.1.1.9
INTEGER (0..65535) · Integer32
The minimum value that the packet's layer 4 dest port number can have and match this ACE.
qosIpAceDstL4PortMax
1.3.6.1.4.1.9.18.2.1.7.1.1.10
INTEGER (0..65535) · Integer32
The maximum value that the packet's layer 4 dest port number can have and match this ACE.
qosIpAceSrcL4PortMin
1.3.6.1.4.1.9.18.2.1.7.1.1.11
INTEGER (0..65535) · Integer32
The minimum value that the packet's layer 4 source port number can have and match this ACE.
qosIpAceSrcL4PortMax
1.3.6.1.4.1.9.18.2.1.7.1.1.12
INTEGER (0..65535) · Integer32
The maximum value that the packet's layer 4 source port number can have and match this ACE.
qosIpAcePermit
1.3.6.1.4.1.9.18.2.1.7.1.1.13
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If the packet matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this ACE (indirectly through the ACL) is applied to the packet. If the value of this attribute is false, then no more ACEs in this ACL are compared to this packet and matching continues with the first ACE of the next ACL.
qosIpAclDefinitionTable
1.3.6.1.4.1.9.18.2.1.7.2
Index: qosIpAclDefinitionId
A class that defines a set of ACLs each being an ordered list of ACEs.
qosIpAclDefinitionId
1.3.6.1.4.1.9.18.2.1.7.2.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIpAclId
1.3.6.1.4.1.9.18.2.1.7.2.1.2
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An index for this ACL. There will be one instance of policy class qosIpAclDefinition with this integer index for each ACE in the ACL per role combination.
qosIpAceOrder
1.3.6.1.4.1.9.18.2.1.7.2.1.3
Unsigned32
An integer that determines the position of this ACE in the ACL. An ACE with a given order is positioned in the access contol list before one with a higher order.
qosIpAclDefAceId
1.3.6.1.4.1.9.18.2.1.7.2.1.4
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
This attribute specifies the ACE in the qosIpAceTable that is in the ACL specified by qosIpAclId at the position specified by qosIpAceOrder.
qosIpAclActionTable
1.3.6.1.4.1.9.18.2.1.7.3
Index: qosIpAclActionId
A class that applies a set of ACLs to interfaces specifying, for each interface the order of the ACL with respect to other ACLs applied to the same interface and, for each ACL the action to take for a packet that matches a permit ACE in that ACL. Interfaces are specified abstractly in terms of interface role combinations.
qosIpAclActionId
1.3.6.1.4.1.9.18.2.1.7.3.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIpAclActAclId
1.3.6.1.4.1.9.18.2.1.7.3.1.2
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
The ACL associated with this action.
qosIpAclInterfaceRoles
1.3.6.1.4.1.9.18.2.1.7.3.1.3
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
The interfaces to which this ACL applies specified in terms of a set of roles.
qosIpAclInterfaceDirection
1.3.6.1.4.1.9.18.2.1.7.3.1.4
INTEGER0 = in1 = out · Integer32
The direction of packet flow at the interface in question to which this ACL applies.
qosIpAclOrder
1.3.6.1.4.1.9.18.2.1.7.3.1.5
Unsigned32
An integer that determines the order of this ACL in the list of ACLs applied to interfaces of the specified role combination. An ACL with a given order is positioned in the list before one with a higher order.
qosIpAclDscp
1.3.6.1.4.1.9.18.2.1.7.3.1.6
DscpAn integer that is in the range of the DiffServ codepoint values. (0..63) · Integer32
The DSCP to classify the packet with in the event that the packet matches an ACE in this ACL and the ACE is a permit.
qosIpAclDscpTrusted
1.3.6.1.4.1.9.18.2.1.7.3.1.7
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosIpAclDscp (qosIpAclDscp is ignored). The packet is still policed as part of its micro flow and its aggregate flow.
When a trusted action is applied to an input interface, the Dscp associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing.
qosIpAclMicroFlowPolicerId
1.3.6.1.4.1.9.18.2.1.7.3.1.8
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An index identifying the instance of policer to apply to the microflow. It must correspond to the integer index of an instance of class qosPolicerTableor be zero. If zero, the microflow is not policed.
qosIpAclAggregateId
1.3.6.1.4.1.9.18.2.1.7.3.1.9
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and is not policed as part of any aggregate.
qosIfSchedulingPreferencesTable
1.3.6.1.4.1.9.18.2.1.8.1
Index: qosIfSchedulingPreferenceId
This class specifies the scheduling preference an interface chooses if it supports multiple scheduling types. Higher values are preferred over lower values.
qosIfSchedulingPreferenceId
1.3.6.1.4.1.9.18.2.1.8.1.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIfSchedulingRoles
1.3.6.1.4.1.9.18.2.1.8.1.1.2
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
The combination of roles the interface must have for this policy instance to apply to that interface.
qosIfSchedulingPreference
1.3.6.1.4.1.9.18.2.1.8.1.1.3
INTEGER (1..16) · Integer32
The preference to use this scheduling discipline and queue type. A higher value means a higher preference. If two disciplines have the same preference the choice is a local decision.
An enumerate type for all the known scheduling disciplines.
qosIfSchedulingQueueType
1.3.6.1.4.1.9.18.2.1.8.1.1.5
QosInterfaceQueueType1 = oneQ1t2 = oneQ2t3 = oneQ4t4 = oneQ8t5 = twoQ1t6 = twoQ2t7 = twoQ4t8 = twoQ8t9 = threeQ1t10 = threeQ2t11 = threeQ4t12 = threeQ8t13 = fourQ1t14 = fourQ2t15 = fourQ4t16 = fourQ8t17 = eightQ1t18 = eightQ2t19 = eightQ4t20 = eightQ8t21 = sixteenQ1t22 = sixteenQ2t23 = sixteenQ4t24 = sixtyfourQ1t25 = sixtyfourQ2t26 = sixtyfourQ4t27 = oneP1Q0t28 = oneP1Q4t29 = oneP1Q8t30 = oneP2Q1t31 = oneP2Q2t32 = oneP3Q1t33 = oneP7Q8t34 = oneP3Q8t35 = sixteenQ8t36 = oneP15Q8t37 = oneP15Q1t38 = oneP7Q1t39 = oneP31Q1t40 = thirtytwoQ1t41 = thirtytwoQ8t42 = oneP31Q8t43 = oneP7Q4t44 = oneP3Q4t45 = oneP7Q2tAn enumerated type for all the known interface types. The interface types are currently limited to a predefined combination of queues and thresholds such that the product of queues and thresholds does not exceed 64 (i.e., the total number of DSCPs. · Integer32
The queue type of this preference.
qosIfDropPreferenceTable
1.3.6.1.4.1.9.18.2.1.8.2
Index: qosIfDropPreferenceId
This class specifies the preference of the drop mechanism an interface chooses if it supports multiple drop mechanisms. Higher values are preferred over lower values.
qosIfDropPreferenceId
1.3.6.1.4.1.9.18.2.1.8.2.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIfDropRoles
1.3.6.1.4.1.9.18.2.1.8.2.1.2
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
The combination of roles the interface must have for this policy instance to apply to that interface.
qosIfDropPreference
1.3.6.1.4.1.9.18.2.1.8.2.1.3
INTEGER (1..16) · Integer32
The preference to use this drop mechanism. A higher value means a higher preference. If two mechanisms have the same preference the choice is a local decision.
An enumerate type for all the known drop mechanisms.
qosIfDscpAssignmentTable
1.3.6.1.4.1.9.18.2.1.8.3
Index: qosIfDscpAssignmentId
The assignment of each DSCP to a queue and threshold for each interface queue type.
qosIfDscpAssignmentId
1.3.6.1.4.1.9.18.2.1.8.3.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIfDscpRoles
1.3.6.1.4.1.9.18.2.1.8.3.1.2
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
The role combination the interface must be configured with.
qosIfQueueType
1.3.6.1.4.1.9.18.2.1.8.3.1.3
QosInterfaceQueueType1 = oneQ1t2 = oneQ2t3 = oneQ4t4 = oneQ8t5 = twoQ1t6 = twoQ2t7 = twoQ4t8 = twoQ8t9 = threeQ1t10 = threeQ2t11 = threeQ4t12 = threeQ8t13 = fourQ1t14 = fourQ2t15 = fourQ4t16 = fourQ8t17 = eightQ1t18 = eightQ2t19 = eightQ4t20 = eightQ8t21 = sixteenQ1t22 = sixteenQ2t23 = sixteenQ4t24 = sixtyfourQ1t25 = sixtyfourQ2t26 = sixtyfourQ4t27 = oneP1Q0t28 = oneP1Q4t29 = oneP1Q8t30 = oneP2Q1t31 = oneP2Q2t32 = oneP3Q1t33 = oneP7Q8t34 = oneP3Q8t35 = sixteenQ8t36 = oneP15Q8t37 = oneP15Q1t38 = oneP7Q1t39 = oneP31Q1t40 = thirtytwoQ1t41 = thirtytwoQ8t42 = oneP31Q8t43 = oneP7Q4t44 = oneP3Q4t45 = oneP7Q2tAn enumerated type for all the known interface types. The interface types are currently limited to a predefined combination of queues and thresholds such that the product of queues and thresholds does not exceed 64 (i.e., the total number of DSCPs. · Integer32
The interface queue type to which this row applies.
qosIfDscp
1.3.6.1.4.1.9.18.2.1.8.3.1.4
DscpAn integer that is in the range of the DiffServ codepoint values. (0..63) · Integer32
The DSCP to which this row applies.
qosIfQueue
1.3.6.1.4.1.9.18.2.1.8.3.1.5
INTEGER (1..64) · Integer32
The queue to which the DSCP applies for the given interface type.
qosIfThresholdSet
1.3.6.1.4.1.9.18.2.1.8.3.1.6
INTEGER (1..8) · Integer32
The threshold set of the specified queue to which the DSCP applies for the given interface type.
qosIfRedTable
1.3.6.1.4.1.9.18.2.1.8.4
Index: qosIfRedId
A class of lower and upper values for each threshold set in a queue supporting WRED. If the size of the queue for a given threshold is below the lower value then packets assigned to that threshold are always accepted into the queue. If the size of the queue is above upper value then packets are always dropped. If the size of the queue is between the lower and the upper then packets are randomly dropped.
qosIfRedId
1.3.6.1.4.1.9.18.2.1.8.4.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIfRedRoles
1.3.6.1.4.1.9.18.2.1.8.4.1.2
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
The role combination the interface must be configured with.
qosIfRedNumThresholdSets
1.3.6.1.4.1.9.18.2.1.8.4.1.3
ThresholdSetRange0 = zeroT1 = oneT2 = twoT4 = fourT8 = eightTAn integer that is limited to the number of threshold sets per queue supported by the PIB. A threshold set is a collection of parameters describing queue threshold. The parameters of a threshold set depend on the drop mechanism the queue implements. For example, the threshold set for
tail-drop comprises a single parameter, the percentage of
queue size at which dropping occurs. The threshold set for WRED comprises two parameters; within the range of the two parameters packets are randomly dropped. · Integer32
The values in this entry apply only to queues with the number of thresholds specified by this attribute.
qosIfRedThresholdSet
1.3.6.1.4.1.9.18.2.1.8.4.1.4
INTEGER (1..8) · Integer32
The threshold set to which the lower and upper values apply. It must be in the range 1 through qosIfRedNumThresholdSets. There must be exactly one PRI for each value in this range.
qosIfRedThresholdSetLower
1.3.6.1.4.1.9.18.2.1.8.4.1.5
PercentAn integer that is in the range of a percent value. (0..100) · Integer32
The threshold value below which no packets are dropped.
qosIfRedThresholdSetUpper
1.3.6.1.4.1.9.18.2.1.8.4.1.6
PercentAn integer that is in the range of a percent value. (0..100) · Integer32
The threshold value above which all packets are dropped.
qosIfTailDropTable
1.3.6.1.4.1.9.18.2.1.8.5
Index: qosIfTailDropId
A class for threshold sets in a queue supporting tail drop. If the size of the queue for a given threshold set is at or below the specified value then packets assigned to that threshold set are always accepted into the queue. If the size of the queue is above the specified value then packets are always dropped.
qosIfTailDropId
1.3.6.1.4.1.9.18.2.1.8.5.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIfTailDropRoles
1.3.6.1.4.1.9.18.2.1.8.5.1.2
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
The role combination the interface must be configured with.
qosIfTailDropNumThresholdSets
1.3.6.1.4.1.9.18.2.1.8.5.1.3
ThresholdSetRange0 = zeroT1 = oneT2 = twoT4 = fourT8 = eightTAn integer that is limited to the number of threshold sets per queue supported by the PIB. A threshold set is a collection of parameters describing queue threshold. The parameters of a threshold set depend on the drop mechanism the queue implements. For example, the threshold set for
tail-drop comprises a single parameter, the percentage of
queue size at which dropping occurs. The threshold set for WRED comprises two parameters; within the range of the two parameters packets are randomly dropped. · Integer32
The value in this entry applies only to queues with the number of thresholds specified by this attribute.
qosIfTailDropThresholdSet
1.3.6.1.4.1.9.18.2.1.8.5.1.4
INTEGER (1..8) · Integer32
The threshold set to which the threshold value applies
qosIfTailDropThresholdSetValue
1.3.6.1.4.1.9.18.2.1.8.5.1.5
PercentAn integer that is in the range of a percent value. (0..100) · Integer32
The threshold value above which packets are dropped.
qosIfWeightsTable
1.3.6.1.4.1.9.18.2.1.8.6
Index: qosIfWeightsId
A class of scheduling weights for each queue of an interface that supports weighted round robin scheduling or a mix of priority queueing and weighted round robin. For a queue with N priority queues, the N highest queue numbers are the priority queues with the highest queue number having the highest priority. WRR is applied to the non-priority queues.
qosIfWeightsId
1.3.6.1.4.1.9.18.2.1.8.6.1.1
PolicyInstanceIdA textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance.
For any integer index that refers to another policy instance, that other policy instance must exist. Furthermore, it is an error to try to delete a policy instance that is referred to by another instance without first deleting the referring instance. · Unsigned32
An integer index to identify the instance of the policy class.
qosIfWeightsRoles
1.3.6.1.4.1.9.18.2.1.8.6.1.2
RoleCombinationA Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum. SIZE (0..255) · OCTET STRING
The role combination the interface must be configured with.
qosIfWeightsNumQueues
1.3.6.1.4.1.9.18.2.1.8.6.1.3
QueueRange1 = oneQ2 = twoQ3 = threeQ4 = fourQ8 = eightQ16 = sixteenQ32 = thirtyTwoQ64 = sixtyFourQAn integer that is limited to the number of queues per interface supported by the PIB. Limited to 64 which is the number of codepoints. · Integer32
The value of the weight in this instance applies only to interfaces with the number of queues specified by this attribute.
qosIfWeightsQueue
1.3.6.1.4.1.9.18.2.1.8.6.1.4
INTEGER (1..64) · Integer32
The queue to which the weight applies.
qosIfWeightsDrainSize
1.3.6.1.4.1.9.18.2.1.8.6.1.5
Unsigned32
The maximum number of bytes that may be drained from the queue in one cycle. The percentage of the bandwith allocated to this queue can be calculated from this attribute and the sum of the drain sizes of all the non-priority queues of the interface.
qosIfWeightsQueueSize
1.3.6.1.4.1.9.18.2.1.8.6.1.6
Unsigned32
The size of the queue in bytes. Some devices set queue size in terms of packets. These devices must calculate the queue size in packets by assuming an average packet size suitable for the particular interface.
Some devices have a fixed size buffer to be shared among all queues. These devices must allocate a fraction of the total buffer space to this queue calculated as the the ratio of the queue size to the sum of the queue sizes for the interface.