CISCO-SP-MIB

CSpLinksetIdThe configured name associated with an Sp Linkset. SIZE (1..19) · OCTET STRING

The name of the linkset.

CSpPointCodeThe SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. (0..16777216) · Unsigned32

The point code to which this linkset is connected.

CSpOsiState1 = active2 = inactive3 = inhibited4 = uninhibited5 = shut6 = noshutThe list of possible link/linkset statuses. 'active' : Traffic may flow over this link/linkset 'inactive' : Traffic cannot flow over this link/linkset. 'inhibited' : Traffic cannot flow over this link/linkset. This state was reached as a result of administrative action. 'uninhibited': The link/linkset is available at the MTP3 layer. 'shut ': The link/linkset has been forced to an unavailable state by an administrative action. 'noshut ': The link/linkset has been removed from an unavailable state by an administrative action. · Integer32

The status of this linkset.

CSpAclIdAn numeric Identifier used to specify and access list used to permit and deny packets based on MTP3 information. (0..2999) · Unsigned32

Packets are filtered against this access control list before they are passed to the routing function. A value of zero indicates that no access control list is present.

CSpAclIdAn numeric Identifier used to specify and access list used to permit and deny packets based on MTP3 information. (0..2999) · Unsigned32

Packets are filtered against this access control list after they have passed through the routing function. A value of zero indicates that no access control list is present.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for signalling network management messages.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for signalling network test and maintenance messages.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

This routing table has been defined as a spare routing table by the standards committee.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for SS7 Signaling Connection Control Part(SCCP) messages.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for Telephone User Part(TUP) messages.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for ISDN User Part messages.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for Data User Part (call and circuit-related messages).

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for Data User Part (facility registration and cancellation messages).

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for MTP Testing User Part messages.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for Broadband ISDN User Part(BISUP) messages.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

The routing table for Satellite ISDN User Part(SISUP) messages.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

This routing table has been defined as a spare routing table by the standards committee.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

This routing table has been defined as a spare routing table by the standards committee.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

This routing table has been defined as a spare routing table by the standards committee.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

This routing table has been defined as a spare routing table by the standards committee.

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

Reference: ITU Q.704 Signalling network functions and messages, section 14.2.1.

This routing table has been defined as a spare routing table by the standards committee.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This indicates if accounting for this linkset is enabled. 'true' Indicates that the accounting function is enabled for this linkset and is being accumulated in cSpAccountingTable. 'false' Indicates that the accounting function is disabled.

Unsigned32

The number of links in this linkset.

Counter32 · packets

The number of packets(message signal units) transmitted by this linkset(Q752/3.3).

Counter64 (0..18446744073709551615) · packets

The number of packets(message signal units) transmitted by this linkset(Q752/3.3). This is the 64-bit version of cSpLinksetPacketsSent.

Counter32 · packets

The number of packets(message signal units) received by this linkset(Q752/3.5).

Counter64 (0..18446744073709551615) · packets

The number of packets(message signal units) received by this linkset(Q752/3.5). This is the 64-bit version of cSpLinksetPacketsRcvd.

Counter32 · bytes

The number of bytes transmitted by this linkset(Q752/3.1).

Counter64 (0..18446744073709551615) · bytes

The number of bytes transmitted by this linkset(Q752/3.1). This is the 64-bit version of cSpLinksetBytesSent.

Counter32 · bytes

The number of bytes received by this linkset(Q752/3.4).

Counter64 (0..18446744073709551615) · bytes

The number of bytes received by this linkset(Q752/3.4). This is the 64-bit version of cSpLinksetBytesRcvd.

TimeTicks

Time linkset was providing service related to Q752/Table 4.2.

TimeTicks

Time linkset was Out-of-Service as required for Q752/Table 4.2.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Alignment ready timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Proving period timer normal timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Proving period timer emergency timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.

Unsigned32 · milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Sending SIB timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.

Unsigned32 · 100 milli-seconds.

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Remote congestion timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.

Unsigned32 · 100 milli-seconds.

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Excessive delay of acknowledgement timer. The default and valid range is dependant on the value of cSpSs7Variant The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.

Unsigned32

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Interval timer for error interval monitor. Note that this timer is only applicable if cSpLinkType is serial.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Delay to avoid message mis-sequencing on changeover.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for changeover acknowledgement.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Time controlled diversion-delay to avoid mis-sequencing on change back.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for change back acknowledgement (first attempt).

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for change back acknowledgement (second attempt).

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Delay to avoid message mis-sequencing on controlled rerouting.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for signalling data link connection acknowledgement.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Transfer prohibited inhibition timer (transient solution).

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting to repeat signalling routeset test message.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.).

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for uninhibit acknowledgement.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for force uninhibit.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for inhibition acknowledgement.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting to start signalling routeset congestion test.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for routeset congestion status update.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Delay to avoid oscillation of initial alignment failure and link restart.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer within a signalling point whose MTP restarts, for supervising link and linkset activation as well as the receipt of routing information.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Supervision timer during MTP restart to avoid possible ping-pong of TFP, TFR2) and TRA messages.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Overall MTP restart timer at the signalling point whose MTP restarts. Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Local inhibit test timer.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Remote inhibit test timer.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Stabilizing timer after removal of local processor outage, used in LPO latching to RPO (national option)

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer at restarting SP waiting to repeat traffic restart waiting message.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Minimum duration of unavailability for full restart.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer at SP adjacent to restarting SP waiting for traffic restart waiting message.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer started when TRA sent in response to unexpected TRA or TRW.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

False link congestion detection timer.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Link oscillation timer - Procedure A.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Probation timer for link oscillation - Procedure B.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Suspension timer for link oscillation - Procedure B.

CSpLinkSLCThe Signalling Link Code. This is the link identifier within a linkset. (0..15) · Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

The Signalling Link Code for this link.

CSpOsiState1 = active2 = inactive3 = inhibited4 = uninhibited5 = shut6 = noshutThe list of possible link/linkset statuses. 'active' : Traffic may flow over this link/linkset 'inactive' : Traffic cannot flow over this link/linkset. 'inhibited' : Traffic cannot flow over this link/linkset. This state was reached as a result of administrative action. 'uninhibited': The link/linkset is available at the MTP3 layer. 'shut ': The link/linkset has been forced to an unavailable state by an administrative action. 'noshut ': The link/linkset has been removed from an unavailable state by an administrative action. · Integer32

The status of this link.

CSpLinkType1 = other2 = serial3 = sctpIpThe link types. 'other' : This link is of some type not listed below. 'serial' : This link is an serial link transporting SS7 traffic. 'sctpIp' : This a SCTP/IP link. · Integer32

Reference: For SCTP see RFC 2960.

The link type.

InterfaceIndexOrZeroEither the value 0, or the ifIndex value of an interface in the ifTable. (0..2147483647) · Integer32

Reference: RFC1213.txt

If the link type specified by cSpLinkType is serial, this is the ifIndex specified in MIB-2, otherwise no significance is to be placed on this value.

Integer32 (-1..65535)

If the link type specified by cSpLinkType is sctpIp, this is the sctpAssocId defined in the CISCO-SCTP-MIB. Where value greater than or equal to zero indicates a valid association and negative one indicates an invalid association. This value will always be set to negative one when cSpLinkType is set to the two value.

Counter32 · packets

The number of MTP3 packets received by this link. This measurement is specified in Q752/3.5

Counter32 · packets

The number of MTP3 packets sent by this link. This measurement is specified in Q752/3.3

Counter64 (0..18446744073709551615) · bytes

The number of MTP3 packets received by this link. This is the 64-bit version of cSpLinkMtp3PacketsRcvd. This measurement is specified in Q752/3.5

Counter64 (0..18446744073709551615) · bytes

The number of MTP3 packets sent by this link. This is the 64-bit version of cSpLinkMtp3PacketsSent. This measurement is specified in Q752/3.3

Counter32 · bytes

The number of MTP3 bytes received by this link. This measurement is specified in Q752/3.4

Counter32 · bytes

The number of MTP3 bytes sent by this link. This measurement is specified in Q752/3.1

Counter64 (0..18446744073709551615) · bytes

The number of MTP3 bytes received by this link. This is the 64-bit version of cSpLinkMtp3BytesRcvd. This measurement is specified in Q752/3.4

Counter64 (0..18446744073709551615) · bytes

The number of MTP3 bytes sent by this link. This is the 64-bit version of cSpLinkMtp3BytesSent. This measurement is specified in Q752/3.1

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Alignment ready timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType value is equal to 'serial'. A get on this object will return a zero if cSpLinkType is not serial.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Proving period timer normal timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.

Unsigned32 · 100 milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Proving period timer emergency timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.

Unsigned32 · milli-seconds

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Sending SIB timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.

Unsigned32 · 100 milli-seconds.

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Remote congestion timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.

Unsigned32 · 100 milli-seconds.

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Excessive delay of acknowledgement timer. The default and valid range is dependant on the value of cSpSs7Variant The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.

Unsigned32

Reference: ITU Q.703 Signalling Link. ANSI T1.111.3 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Interval timer for error interval monitor. Note that this timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Delay to avoid message mis-sequencing on changeover.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for changeover acknowledgement.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Time controlled diversion-delay to avoid mis-sequencing on change back.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for change back acknowledgement (first attempt).

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for change back acknowledgement (second attempt).

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Delay to avoid message mis-sequencing on controlled rerouting.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for signalling data link connection acknowledgement.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Transfer prohibited inhibition timer (transient solution).

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting to repeat signalling routeset test message.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.).

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for uninhibit acknowledgement.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for force uninhibit.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for inhibition acknowledgement.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting to start signalling routeset congestion test.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Waiting for routeset congestion status update.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Delay to avoid oscillation of initial alignment failure and link restart.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer within a signalling point whose MTP restarts, for supervising link and linkset activation as well as the receipt of routing information.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Supervision timer during MTP restart to avoid possible ping-pong of TFP, TFR2) and TRA messages.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Overall MTP restart timer at the signalling point whose MTP restarts. Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Local inhibit test timer.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Remote inhibit test timer.

Unsigned32

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Stabilizing timer after removal of local processor outage, used in LPO latching to RPO (national option)

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer at restarting SP waiting to repeat traffic restart waiting message.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Minimum duration of unavailability for full restart.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer at SP adjacent to restarting SP waiting for traffic restart waiting message.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer started when TRA sent in response to unexpected TRA or TRW.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

False link congestion detection timer.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Link oscillation timer - Procedure A.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Probation timer for link oscillation - Procedure B.

Unsigned32

Reference: ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Message Transfer Part (MTP).

Suspension timer for link oscillation - Procedure B.

Gauge32

Number of packets waiting to be sent over this link.

Unsigned32

This is the maximum number of packets waiting to be sent over this link since the last time this value was reset as indicated by cSpLinkXmitQueueDepthHighReset. Resetting this object is achieved by setting this object to 0. Attempting to set this object to any other value will result in a wrongValue error.

TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks

This indicates when cSpLinkXmitQueueDepthHigh was set to 0.

Unsigned32 (0..3)

Reference: ITU Q.704 Signalling network functions and messages. ANSI T1.111 Telecommunications - Signaling system No. 7 (SS7)-Signalling network functions and messages 2.3.5.2.

The signalling link congestion status of this link. 0 is the least congestion level, 3 is the highest congestion level.

Unsigned32

Threshold used to abate congestion level 1.

Unsigned32

Threshold used to abate congestion level 2.

Unsigned32

Threshold used to abate congestion level 3.

Unsigned32

Threshold used to mark onset of congestion level 1.

Unsigned32

Threshold used to mark onset of congestion level 2.

Unsigned32

Threshold used to mark onset of congestion level 3.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

Indicated if signalling link test is enabled on this link. true : signalling link test is enabled. false : signalling link test not enabled.

TimeTicks

Duration of link in the In-Service state Q752/1.1.

Counter32

Count of Signalling Link failures - All reasons Q752/1.2.

Counter32

Count of Signalling Link failures - Abnormal FIBR/BSNR Q752/1.4.

Counter32

Count of Signalling Link failures - Excessive delay of acknowledgement Q752/1.4.

Counter32

Count of Signalling Link failures - Excessive error rate Q752/1.5.

Counter32

Count of Signalling Link failures - Excessive duration of congestion Q752/1.6.

Counter32

Count of alignment or proving errors Q752/1.7.

Counter32

Count of signal units received in error Q752/1.8.

Counter32

Count of negative acknowledgements received Q752/1.9.

Counter32

Count of 'local automatic changeover' events Q752/1.10.

Counter32

Count of 'local automatic changeback' events Q752/1.11.

TimeTicks

Duration of Signalling Link unavailable(for any reason) Q752/2.1.

TimeTicks

Duration of Signalling Link unavailable due to local management actions Q752/2.5.

TimeTicks

Duration of Signalling Link unavailable due to remote management actions Q752/2.6.

TimeTicks

Duration of Signalling Link unavailable due to link failure Q752/2.7.

TimeTicks

Duration of Signalling Link unavailable due to remote processor outage Q752/2.9.

Counter32

Count of 'remote processor outage' events Q752/2.10 and Q752/2.11. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.

TimeTicks

Duration of local busy Q752/2.15.

Counter32

Count of local inhibition Q752/2.16 and Q752/2.17. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.

Counter32

Count of remote inhibition Q752/2.18 and Q752/2.19. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.

Counter32 · packets

The number of MTP3 packets retransmitted on this link. This measurement is specified in Q752/3.2

Counter32 · bytes

The number of MTP3 bytes retransmitted on this link. This measurement is specified in Q752/3.2

Counter32 · events

The number times this signalling link was marked congested. This measurement is specified in Q752/3.6

TimeTicks

Cumulative duration of signalling link congestion Q752/3.7.

Counter32 · Packets

The number of packets(MSUs) discarded due to signalling link level 1 congestion Q752/3.10

Counter32 · Packets

The number of packets(MSUs) discard due to signalling link level 2 congestion Q752/3.10

Counter32 · Packets

The number of packets(MSUs) discard due to signalling link level 3 congestion Q752/3.10

Counter32 · bytes

The number times this signalling link entered congestion level 1 and packets were discarded. This measurement is specified in Q752/3.11

Counter32 · bytes

The number times this signalling link entered congestion level 2 and packets were discarded. This measurement is specified in Q752/3.11

Counter32 · bytes

The number times this signalling link entered congestion level 3 and packets were discarded. This measurement is specified in Q752/3.11

CSpRouteTableNameThe configured name associated with an SP Route Table. SIZE (1..19) · OCTET STRING

The configured name for this route table.

CSpPointCodeThe SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. (0..16777216) · Unsigned32

The destination point code.

Unsigned32 (1..9)

The cost assigned to this linkset matching this route. Higher numbers represent higher cost.

CSpLinksetIdThe configured name associated with an Sp Linkset. SIZE (1..19) · OCTET STRING

The linkset that the packet is to be forwarded to on matching this route.

Unsigned32

The mask used to define which part of cSpRouteDpc is significant when comparing the cSpRouteDpc to the destination code point in the packet to be routed.

CSpRouteStatus1 = available2 = restricted3 = unavailableThe status of the route from the perspective of the SP. 'available' : Route is available for routing of packets. 'restricted' : Route has been restricted from routing. 'unavailable' : Route is unavailable for routing of packets. · Integer32

The status of the route from the perspective of the Signaling Point.

CSpAclIdAn numeric Identifier used to specify and access list used to permit and deny packets based on MTP3 information. (0..2999) · Unsigned32

The identifier for this ACL.

Unsigned32

An numeric value assigned to each access list entry. The values start with zero and increase by one.

INTEGER1 = dpc2 = opc3 = pattern4 = sio · Integer32

This indicates which columns are used in determining the matching criteria for this access control. 'dpc' : cSpAclDpc and cSpAclDpcMask are the relevant columns. The packet is compared to cSpAclDpc in conjunction with cSpAclDpcMask to determine if the packet matches this access control. 'opc' : cSpAclOpc and cSpAclOpcMask are the relevant columns. The packet is compared to cSpAclOpc in conjunction with cSpAclOpcMask to determine if the packet matches this access control. 'pattern' : cSpAclPattern and cSpAclOffset are the relevant columns. The matching criteria is based on matching the pattern specified by cSpAclPattern at offset cSpAclOffset from the start of the packet. 'sio' : cSpAclSi is the relevant column. The SIO field of the packet is compared to cSpAclSi and a match is based on equality.

CSpPointCodeThe SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. (0..16777216) · Unsigned32

The destination point code specified for this ACL.

Unsigned32

The mask used to define which part of the point code in the packet is significant when comparing the destination point code with cSpAclDpc.

CSpPointCodeThe SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. (0..16777216) · Unsigned32

The origin point code specified in this ACL.

Unsigned32

The mask used to define which part of the origin point code in the packet is significant when comparing the origin point code with cSpAclDpc.

CSpAclSiThe list of possible Service Indicator values. This identifies the type of SS7 packet. The service indicator codes for the international signalling network are allocated as follows: 0 Signalling network management messages (SNMM) 1 Signalling network testing and maintenance messages (SNTM) 2 Spare 2 3 SCCP 4 Telephone User Part (TUP) 5 ISDN User Part (ISUP) 6 Data User Part, call and circuit-related messages (DUPC) 7 Data User Part, facility registration and cancellation messages (DUPF) 8 Reserved for MTP Testing User Part (MTUP) 9 Broadband ISDN User Part (BISUP) 10 Satellite ISDN User Part (SISUP) 11 Spare 12 Spare 13 Spare 14 Spare 15 Spare Reference: ITU Q.704 Signalling network functions and messages section 14.2.1 Service indicator. (0..15) · Unsigned32

The Service Indicator Octet.

DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a

The pattern used to match a packet at offset cSpAclOffset.

Unsigned32

The offset into the packet were we begin matching the pattern specified by cSpAclPattern is to start.

CSpAclAction1 = accept2 = discardThe list of possible actions to be performed on a packet who's point code matches an access control. 'accept' : The matching packet is accepted for further processing. 'discard' : The matching packet is to be discarded without any further processing on this packet. · Integer32

The action to be performed on the packet that matched this access control.

INTEGER1 = passed2 = violation · Integer32

The accounting table identifier. 'passed' : signifies that this table instance represents statistics for packets that matched an ACL in the linkset's inbound ACL and in the outbound ACL. 'violation' : signifies that this table instance represents statistics for packets that did not match an ACL in the linkset's inbound ACL and in the outbound ACL.

CSpPointCodeThe SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. (0..16777216) · Unsigned32

The destination point code.

CSpPointCodeThe SS7 network node address as specified in the International Telecommunication Union standard Q.708: Specifications of Signalling System No. 7 - Numbering of International Signalling Point Codes, and by ANSI T1.111.8 Numbering of Signalling Point Codes. (0..16777216) · Unsigned32

The origin point code.

Counter32 · packets

Sum of all received packets for this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Sum of all received packets for this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccRcvdPackets .

Counter32 · packets

Sum of all transmitted packets for this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Sum of all transmitted packets for this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSentPackets .

Counter32 · bytes

Sum of all received bytes for this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Sum of all received bytes for this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccRcvdBytes .

Counter32 · bytes

Sum of all transmitted bytes for this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Sum of all transmitted bytes for this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSentBytes .

Counter32 · packets

Count of Signalling Network Management (SNM) packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Signalling Network Management (SNM) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSnmmRcvdPackets .

Counter32 · bytes

Count of bytes contained in the Signalling Network Management (SNM) messages received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes contained in the Signalling Network Management (SNM) messages received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSnmmRcvdBytes .

Counter32 · packets

Count of Signalling Network Management (SNM) packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Signalling Network Management (SNM) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSnmmSentPackets .

Counter32 · bytes

Count of Signalling Network Management (SNM) bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Signalling Network Management (SNM) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSnmmSentBytes .

Counter32 · packets

Count of Signalling Network Testing and maintenance (MTN) packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Signalling Network Testing and maintenance (MTN) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSntmRcvdPackets .

Counter32 · bytes

Count of Signalling Network Testing and maintenance (MTN) bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Signalling Network Testing and maintenance (MTN) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSntmRcvdBytes .

Counter32 · packets

Count of Signalling Network Testing and maintenance (MTN) packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Signalling Network Testing and maintenance (MTN) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSntmSentPackets .

Counter32 · bytes

Count of Signalling Network Testing and maintenance (MTN) bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Signalling Network Testing and maintenance (MTN) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSntmSentBytes .

Counter32 · packets

Count of packets with Service Indicator value 2 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 2 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare2RcvdPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 2 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 2 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare2RcvdBytes .

Counter32 · packets

Count of packets with Service Indicator value 2 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 2 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare2SentPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 2 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 2 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare2SentBytes .

Counter32 · packets

Count of Signaling Connection Control Part (SCCP) packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Signaling Connection Control Part (SCCP) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSccpRcvdPackets .

Counter32 · bytes

Count of Signaling Connection Control Part (SCCP) bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Signaling Connection Control Part (SCCP) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSccpRcvdBytes .

Counter32 · packets

Count of Signaling Connection Control Part (SCCP) packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Signaling Connection Control Part (SCCP) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSccpSentPackets .

Counter32 · bytes

Count of Signaling Connection Control Part (SCCP) bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Signaling Connection Control Part (SCCP) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSccpSentBytes .

Counter32 · packets

Count of Telephone User Part (TUP) packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Telephone User Part (TUP) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccTupRcvdPackets .

Counter32 · bytes

Count of Telephone User Part (TUP) bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Telephone User Part (TUP) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccTupRcvdBytes .

Counter32 · packets

Count of Telephone User Part (TUP) packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Telephone User Part (TUP) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccTupSentPackets .

Counter32 · bytes

Count of Telephone User Part (TUP) bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Telephone User Part (TUP) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccTupSentBytes .

Counter32 · packets

Count of ISDN User Part (ISUP) packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of ISDN User Part (ISUP) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccIsupRcvdPackets .

Counter32 · bytes

Count of ISDN User Part (ISUP) bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of ISDN User Part (ISUP) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccIsupRcvdBytes .

Counter32 · packets

Count of ISDN User Part (ISUP) packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of ISDN User Part (ISUP) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccIsupSentPackets .

Counter32 · bytes

Count of ISDN User Part (ISUP) bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of ISDN User Part (ISUP) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccIsupSentBytes .

Counter32 · packets

Count of Data User Part (call and circuit-related messages) - Dupc packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Data User Part (call and circuit-related messages) - Dupc packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupcRcvdPackets .

Counter32 · bytes

Count of Dupc bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Dupc bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupcRcvdBytes .

Counter32 · packets

Count of Dupc packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Dupc packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupcSentPackets .

Counter32 · bytes

Count of Dupc bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Dupc bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupcSentBytes .

Counter32 · packets

Count of Data User Part (facility registration and cancellation messages) - Dupf packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Data User Part (facility registration and cancellation messages) - Dupf packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupfRcvdPackets .

Counter32 · bytes

Count of Dupf bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Dupf bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupfRcvdBytes .

Counter32 · packets

Count of Dupf packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Dupf packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupfSentPackets .

Counter32 · bytes

Count of Dupf bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Dupf bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupfSentBytes .

Counter32 · packets

Count of Reserved for MTP Testing User Part (Mtup) packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Reserved for MTP Testing User Part (Mtup) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccMtupRcvdPackets .

Counter32 · bytes

Count of Reserved for MTP Testing User Part (Mtup) bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Reserved for MTP Testing User Part (Mtup) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccMtupRcvdBytes .

Counter32 · packets

Count of Reserved for MTP Testing User Part (Mtup) packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Reserved for MTP Testing User Part (Mtup) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccMtupSentPackets .

Counter32 · bytes

Count of Reserved for MTP Testing User Part (Mtup) bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Reserved for MTP Testing User Part (Mtup) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccMtupSentBytes .

Counter32 · packets

Count of Broadband ISDN User Part (Bisup) packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Broadband ISDN User Part (Bisup) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccBisupRcvdPackets .

Counter32 · bytes

Count of Broadband ISDN User Part (Bisup) bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Broadband ISDN User Part (Bisup) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccBisupRcvdBytes .

Counter32 · packets

Count of Broadband ISDN User Part (Bisup) packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Broadband ISDN User Part (Bisup) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccBisupSentPackets .

Counter32 · bytes

Count of Broadband ISDN User Part (Bisup) bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Broadband ISDN User Part (Bisup) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccBisupSentBytes .

Counter32 · packets

Count of Satellite ISDN User Part (Sisup) packets received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Satellite ISDN User Part (Sisup) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSisupRcvdPackets .

Counter32 · bytes

Count of Satellite ISDN User Part (Sisup) bytes received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Satellite ISDN User Part (Sisup) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSisupRcvdBytes .

Counter32 · packets

Count of Satellite ISDN User Part (Sisup) packets transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of Satellite ISDN User Part (Sisup) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSisupSentPackets .

Counter32 · bytes

Count of Satellite ISDN User Part (Sisup) bytes transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of Satellite ISDN User Part (Sisup) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSisupSentBytes .

Counter32 · packets

Count of packets with Service Indicator value 11 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 11 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare11RcvdPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 11 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 11 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare11RcvdBytes .

Counter32 · packets

Count of packets with Service Indicator value 11 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 11 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare11SentPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 11 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 11 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare11SentBytes .

Counter32 · packets

Count of packets with Service Indicator value 12 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 12 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare12RcvdPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 12 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 12 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare12RcvdBytes .

Counter32 · packets

Count of packets with Service Indicator value 12 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 12 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare12SentPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 12 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 12 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare12SentBytes .

Counter32 · packets

Count of packets with Service Indicator value 13 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 13 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare13RcvdPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 13 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 13 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare13RcvdBytes .

Counter32 · packets

Count of packets with Service Indicator value 13 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 13 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare13SentPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 13 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 13 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare13SentBytes .

Counter32 · packets

Count of packets with Service Indicator value 14 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 14 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare14RcvdPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 14 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 14 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare14RcvdBytes .

Counter32 · packets

Count of packets with Service Indicator value 14 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 14 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare14SentPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 14 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15SentBytes .

Counter32 · packets

Count of packets with Service Indicator value 15 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 15 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15RcvdPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 15 received on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 15 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15RcvdBytes .

Counter32 · packets

Count of packets with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · packets

Count of packets with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15SentPackets .

Counter32 · bytes

Count of bytes with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination.

Counter64 (0..18446744073709551615) · bytes

Count of bytes with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15SentBytes .