stunIPAddr
1.3.6.1.4.1.9.9.30.1.1.1
IpAddress SIZE (4)
The configured IP address used for all serial tunnelling in this router.
CISCO-STUN-MIB
1995-08-21
The MIB module for serial Tunneling. Overview of STUN MIB MIB description The STUN MIB provides the configuration and operational information on Cisco's serial tunnelling implementation. The following entities are managed: 1) Global STUN information 2) STUN groups 3) STUN ports 4) STUN routes The following example configuration shows how the STUN MIB returns STUN information, from either CISCO A or CISCO B. HOST == SDLC == Cisco A == IP Network == Cisco B == SDLC == SDLC line line device 1) The STUN global entry identifies the IP address by which the router is known to other STUN peers. 2) The STUN group table identifies the STUN group number and protocol type that Cisco A and Cisco B use to route SDLC traffic over the IP network. The table contains an entry for each STUN group defined on the router. 3) The STUN port table identifies the serial interface to the SDLC line for which the router is doing serial tunnelling. The MIB also identifies the STUN group this interface is defined for, and identifies the default routing for unrecognized SDLC addresses. There is a port entry for each STUN-enabled interface on the router. 4) The STUN route table has an entry for each address defined for routing within the STUN group, and an entry for the default routing if the 'stun route all' command is configured. The route entry includes identification of the STUN peer, priority, state, whether local acknowledgment is enabled, and packet and byte counters.
Download CISCO-STUN-MIB.txt Open CISCO-STUN-MIB.txt in a new tab
SCALARS (1) · TABLES (3) · TRAPS (1)
Scalars (1)
| Name | OID |
|---|---|
| stunIPAddr | 1.3.6.1.4.1.9.9.30.1.1.1 |
Tables (3)
| Name | OID |
|---|---|
| stunGroupTable | 1.3.6.1.4.1.9.9.30.1.2.1 |
| stunPortTable | 1.3.6.1.4.1.9.9.30.1.3.1 |
| stunRouteTable | 1.3.6.1.4.1.9.9.30.1.4.1 |
Traps (1)
| Name | OID |
|---|---|
| stunPeerStateChangeNotification | 1.3.6.1.4.1.9.9.30.2.0.1 |
END OF TOC
Scalar details
Table details
stunGroupTable
1.3.6.1.4.1.9.9.30.1.2.1
Index: stunGroupIndex
A table of entries representing STUN groups configured on the router. Each STUN-enabled interface is assigned to a STUN group, and packets can only travel between STUN-enabled interfaces in the same group.
stunGroupIndex
1.3.6.1.4.1.9.9.30.1.2.1.1.1
INTEGER (1..255) · Integer32
The configured STUN group number.
stunProtocolType
1.3.6.1.4.1.9.9.30.1.2.1.1.2
INTEGER1 = basic2 = sdlc3 = sdlctg4 = custom · Integer32
The protocol type for this STUN group.
stunPortTable
1.3.6.1.4.1.9.9.30.1.3.1
Index: ifIndex
A list of STUN-enabled interfaces (ports).
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
stunPortGroupIndex
1.3.6.1.4.1.9.9.30.1.3.1.1.1
INTEGER (1..255) · Integer32
The group number to which the stun port belongs. Frames will only be routed to other ports (on this or another router) in the same stun group. This group must match a stunGroupIndex in the stunGroupTable.
stunPortDefaultPeerType
1.3.6.1.4.1.9.9.30.1.3.1.1.2
INTEGER1 = other2 = ip3 = direct4 = frameRelay · Integer32
The type of identification of the default partner for unrecognized addresses. If there is no default route then the stunRouteType field of stunPortDefaultRemote is 'other'. If ip then the value is in stunRouteIP; if serial or serialDirect then the value is in stunRouteSerial.
stunPortDefaultPeerIP
1.3.6.1.4.1.9.9.30.1.3.1.1.3
IpAddress SIZE (4)
The ip address of the remote default STUN partner, for unrecognized addresses. 0.0.0.0 is returned if the default route type is not ip.
stunPortDefaultPeerSerialInterface
1.3.6.1.4.1.9.9.30.1.3.1.1.4
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
If stunRouteType is serial then this is the serial interface index of the point-to-point link to the remote partner; if stunRouteType is serialDirect then the partner is in the local STUN. if stunRouteType is ip then this field is 0.
stunRouteTable
1.3.6.1.4.1.9.9.30.1.4.1
Index: stunGroupIndex · stunRouteStationAddress
A table containing information about specific SDLC addresses. There is one table entry for each SDLC address configured by the STUN ROUTE command.
stunRouteStationAddress
1.3.6.1.4.1.9.9.30.1.4.1.1.1
INTEGER (1..256) · Integer32
The poll address of the station. 256 indicates the ALL parameter on the STUN ROUTE command, which is the route for all unrecognized addresses.
stunRouteType
1.3.6.1.4.1.9.9.30.1.4.1.1.2
INTEGER1 = other2 = ip3 = direct4 = frameRelay · Integer32
The type of identification of the remote partner.
stunRouteRemoteIP
1.3.6.1.4.1.9.9.30.1.4.1.1.3
IpAddress SIZE (4)
The ip address of the remote STUN partner. 0.0.0.0 if partner type is not ip.
stunRouteSerialInterface
1.3.6.1.4.1.9.9.30.1.4.1.1.4
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
The local interface index to the remote partner. 0 is returned if the partner type is not direct or frameRelay.
stunRoutePriority
1.3.6.1.4.1.9.9.30.1.4.1.1.5
INTEGER1 = low2 = normal3 = medium4 = high · Integer32
The priority with which this station's traffic will be routed across the network.
stunRoutePeerState
1.3.6.1.4.1.9.9.30.1.4.1.1.6
INTEGER1 = dead2 = closed3 = opening4 = openWait5 = connected6 = direct · Integer32
The state of the peer connection through the STUN tunnel.
stunRouteLocalAck
1.3.6.1.4.1.9.9.30.1.4.1.1.7
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Indicates if the STUN connection is locally acknowledged. TRUE-> STUN connection is locally acknowledged FALSE-> STUN connection is not locally acknowledged
stunRouteRxPackets
1.3.6.1.4.1.9.9.30.1.4.1.1.8
Counter32
Count of frames received from the serial interface with this station's address.
stunRouteTxPackets
1.3.6.1.4.1.9.9.30.1.4.1.1.9
Counter32
Count of frames transmitted at the serial interface with this station's address.
stunRouteRxBytes
1.3.6.1.4.1.9.9.30.1.4.1.1.10
Counter32
Count of bytes received from the serial interface with this station's address.
stunRouteTxBytes
1.3.6.1.4.1.9.9.30.1.4.1.1.11
Counter32
Count of bytes transmitted at the serial interface with this station's address.
Trap details
stunPeerStateChangeNotification
1.3.6.1.4.1.9.9.30.2.0.1
This notification indicates that the state of a STUN route has transitioned to active (connected or direct) or inactive (dead or closed).
stunRoutePeerState
1.3.6.1.4.1.9.9.30.1.4.1.1.6
INTEGER1 = dead2 = closed3 = opening4 = openWait5 = connected6 = direct · Integer32
The state of the peer connection through the STUN tunnel.