2004-04-06
The MIB module is for configuration of the switch virtual interface (SVI) autostate feature. Autostate feature is a mechanism to calculate the state of a SVI dynamically when some condition occurs such as a failure of a participating interface in that SVI.
Download CISCO-SVI-AUTOSTATE-MIB.txt Open CISCO-SVI-AUTOSTATE-MIB.txt in a new tab
| Name | OID |
|---|---|
| csaFeatureEnable | 1.3.6.1.4.1.9.9.376.1.1.1 |
| csaTrackedVlansLow | 1.3.6.1.4.1.9.9.376.1.1.2 |
| csaTrackedVlansHigh | 1.3.6.1.4.1.9.9.376.1.1.3 |
| Name | OID |
|---|---|
| csaIfConfigTable | 1.3.6.1.4.1.9.9.376.1.2.1 |
END OF TOC
1.3.6.1.4.1.9.9.376.1.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates whether the autostate feature is enabled. If it is set to 'false', the feature is disabled in the device and the value of csaInterfaceMode does not take effect.
1.3.6.1.4.1.9.9.376.1.1.2
OCTET STRING SIZE (0..256)
A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 0 to 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is tracked by the SVI autostate feature then the bit corresponding to that VLAN is set to '1'. A tracked VLAN, whose all interfaces having their cdsInterfaceMode object value of 'track' and not in forwarding state, will go down.
1.3.6.1.4.1.9.9.376.1.1.3
OCTET STRING SIZE (0..256)
A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 2048 to 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is tracked by the SVI autostate feature then the bit corresponding to that VLAN is set to '1'. A tracked VLAN, whose all interfaces having their cdsInterfaceMode object value of 'track' and not in forwarding state, will go down.
1.3.6.1.4.1.9.9.376.1.2.1
Index: ifIndex
This table contains information and configuration of interface mode regarding the SVI autostate feature.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.376.1.2.1.1.1
INTEGER1 = normal2 = exclude3 = track · Integer32
This object indicates the interface mode regarding SVI autostate feature. This object only takes effect if the value of csaFeatureEnable object is 'true'. 'normal' indicates that when SVI autostate feature is enabled, this interface will participate normally in the autostate calculation of the SVI which it associates. 'exclude' indicates that when SVI autostate feature is enabled, this interface will be excluded from the autostate calculation of the SVI which it associates. 'track' indicates that when SVI autostate feature is enabled, this interface will be tracked in the autostate calculation of the tracked SVI which it associates. If all tracked interfaces of this SVI go down, the corresponding SVI goes down.