2014-07-30
This MIB module defined managed objects that facilitates the management of switching fabric information in a Cisco switch.
Download CISCO-SWITCH-FABRIC-MIB.txt Open CISCO-SWITCH-FABRIC-MIB.txt in a new tab
SCALARS (3) · TABLES (1) · TRAPS (1)
| Name | OID |
|---|---|
| csfFabricCrcErrorNotifEnable | 1.3.6.1.4.1.9.9.803.1.2.1 |
| csfFabricCrcErrorEntPhysicalIndex | 1.3.6.1.4.1.9.9.803.1.3.1 |
| csfFabricCrcErrorDescr | 1.3.6.1.4.1.9.9.803.1.3.2 |
| Name | OID |
|---|---|
| csfFabricUtilTable | 1.3.6.1.4.1.9.9.803.1.1.1 |
| Name | OID |
|---|---|
| csfFabricCrcErrorNotif | 1.3.6.1.4.1.9.9.803.0.1 |
END OF TOC
1.3.6.1.4.1.9.9.803.1.2.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object specifies whether the system generates the cfsFabricCrcErrorNotif. A value of 'false' will prevent cfsFabricCrcErrorNotif notifications from being generated by this system.
1.3.6.1.4.1.9.9.803.1.3.1
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
This object indicates the entPhysicalIndex of the fabric entity on which fabric CRC error happens.
1.3.6.1.4.1.9.9.803.1.3.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the fabric CRC error description. A zero-length string indicates that the error description is not available.
1.3.6.1.4.1.9.9.803.1.1.1
Index: entPhysicalIndex · csfFabricUtilLinkType · csfFabricUtilIndex
A table containing fabric utilization information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.803.1.1.1.1.1
CsfFabricLinkType1 = other2 = qEngineFacingLcXbarLink3 = fabricXbarLink4 = fabricFacingLcXbarLink5 = lcXbarInterLink6 = fabricXbarInterLink7 = centralXbarLinkThe type of fabric link. other - none of the following qEngineFacingLcXbarLink - queue engine facing linecard crossbar link fabricXbarLink - fabric module crossbar link fabricFacingLcXbarLink - fabric module facing linecard crossbar link lcXbarInterLink - linecard crossbar interlink fabricXbarInterLink - fabric module crossbar interlink centralXbarLink - central fabric link · Integer32
This object indicates the type of fabric link on which fabric traffic utilization is monitored.
1.3.6.1.4.1.9.9.803.1.1.1.1.2
Unsigned32
This object indicates an arbitrary integer value which uniquely identifies the type of traffic utilization.
1.3.6.1.4.1.9.9.803.1.1.1.1.3
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the human-readable description of the type of fabric traffic utilization.
1.3.6.1.4.1.9.9.803.1.1.1.1.4
Unsigned32 · gigabits per second
This object indicates the bandwidth of the fabric link.
1.3.6.1.4.1.9.9.803.1.1.1.1.5
CsfPercentOrMinusOneAn integer that is in the range of a percent value. A value of -1 means that the percentage is not available. (-1 | 0..100) · Integer32 · hint d
This object indicates the utilization on the fabric link input.
1.3.6.1.4.1.9.9.803.1.1.1.1.6
CsfPercentOrMinusOneAn integer that is in the range of a percent value. A value of -1 means that the percentage is not available. (-1 | 0..100) · Integer32 · hint d
This object indicates the peak utilization on the fabric link input.
1.3.6.1.4.1.9.9.803.1.1.1.1.7
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This object indicates the time of the most recent change in the corresponding instance value of csfFabricUtilInPeak. This object contains value 0x0000010100000000 when the corresponding instance value of csfFabricUtilInPeak is '0 or '-1'.
1.3.6.1.4.1.9.9.803.1.1.1.1.8
CsfPercentOrMinusOneAn integer that is in the range of a percent value. A value of -1 means that the percentage is not available. (-1 | 0..100) · Integer32 · hint d
This object indicates the utilization on the fabric link output.
1.3.6.1.4.1.9.9.803.1.1.1.1.9
CsfPercentOrMinusOneAn integer that is in the range of a percent value. A value of -1 means that the percentage is not available. (-1 | 0..100) · Integer32 · hint d
This object indicates the peak utilization on the fabric link output.
1.3.6.1.4.1.9.9.803.1.1.1.1.10
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This object indicates the time of the most recent change in the corresponding instance value of csfFabricUtilOutPeak. This object contains value 0x0000010100000000 when the corresponding instance value of csfFabricUtilInPeak is '0 or '-1'.
1.3.6.1.4.1.9.9.803.0.1
A cfsFabricCrcErrorNotif is generated when fabric CRC errors are detected by the managed system.
1.3.6.1.4.1.9.9.803.1.3.1
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
This object indicates the entPhysicalIndex of the fabric entity on which fabric CRC error happens.
1.3.6.1.4.1.9.9.803.1.3.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the fabric CRC error description. A zero-length string indicates that the error description is not available.