2016-08-17
This MIB module defines the managed objects for hardware capacity of Cisco switching devices. The hardware capacity information covers the following but not limited to features: forwarding, rate-limiter ... The following terms are used throughout the MIB: CAM: Content Addressable Memory. TCAM: Ternary Content Addressable Memory. FIB: Forwarding Information Base. VPN: Virtual Private Network. QoS: Quality of Service. CPU rate-limiter: Mechanism to rate-limit or restrict undesired traffic to the CPU. MPLS: Multiprotocol Label Switching.
Download CISCO-SWITCH-HARDWARE-CAPACITY-MIB.txt Open CISCO-SWITCH-HARDWARE-CAPACITY-MIB.txt in a new tab
END OF TOC
1.3.6.1.4.1.9.9.663.1.1.1.1
Index: entPhysicalIndex
This table contains MAC table capacity for each switching engine, as specified by entPhysicalIndex in ENTITY-MIB, capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.1.1.1.1
Counter32
This object indicates the number of Ethernet frames whose source MAC address the switching engine failed to learn while constructing its MAC table.
1.3.6.1.4.1.9.9.663.1.1.1.1.1.2
Unsigned32
This object indicates the number of MAC table entries that are currently in use for this switching engine.
1.3.6.1.4.1.9.9.663.1.1.1.1.1.3
Unsigned32
This object indicates the total number of MAC table entries available for this switching engine.
1.3.6.1.4.1.9.9.663.1.1.1.1.1.4
Unsigned32
This object indicates the total number of multicast MAC table entries on this switching engine.
1.3.6.1.4.1.9.9.663.1.1.1.1.1.5
Unsigned32
This object indicates the total number of unicast MAC table entries on this switching engine.
1.3.6.1.4.1.9.9.663.1.1.1.1.1.6
Unsigned32
This object indicates the total number of MAC table lines on this switching engine. The MAC table is organized as multiple MAC entries per line.
1.3.6.1.4.1.9.9.663.1.1.1.1.1.7
Unsigned32
This object indicates the total number of MAC table lines full on this switching engine. A line full means all the MAC entries on the line are occupied.
1.3.6.1.4.1.9.9.663.1.1.1.2
Index: entPhysicalIndex
This table contains VPN CAM capacity for each entity, as specified by entPhysicalIndex in ENTITY-MIB, capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.1.2.1.1
Unsigned32
This object indicates the number of VPN CAM entries that are currently in use.
1.3.6.1.4.1.9.9.663.1.1.1.2.1.2
Unsigned32
This object indicates the total number of VPN CAM entries.
1.3.6.1.4.1.9.9.663.1.1.2.1
Index: entPhysicalIndex
This table contains FIB TCAM capacity for each entity, as specified by entPhysicalIndex in ENTITY-MIB, capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.2.1.1.1
Unsigned32
This object indicates the number of 72 bits FIB TCAM entries that are currently in use.
1.3.6.1.4.1.9.9.663.1.1.2.1.1.2
Unsigned32
This object indicates the total number of 72 bits FIB TCAM entries available.
1.3.6.1.4.1.9.9.663.1.1.2.1.1.3
Unsigned32
This object indicates the number of 144 bits FIB TCAM entries that are currently in use.
1.3.6.1.4.1.9.9.663.1.1.2.1.1.4
Unsigned32
This object indicates the total number of 144 bits FIB TCAM entries available.
1.3.6.1.4.1.9.9.663.1.1.2.1.1.5
Unsigned32
This object indicates the number of 288 bits FIB TCAM entries that are currently in use.
1.3.6.1.4.1.9.9.663.1.1.2.1.1.6
Unsigned32
This object indicates the total number of 288 bits FIB TCAM entries available.
1.3.6.1.4.1.9.9.663.1.1.2.2
Index: entPhysicalIndex · cshcProtocolFibTcamProtocol
This table contains FIB TCAM usage per specified Layer 3 protocol on an entity capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.2.2.1.1
INTEGER1 = ipv42 = mpls3 = eom4 = ipv65 = ipv4Multicast6 = ipv6Multicast7 = l2VpnPeer8 = l2VpnIpv4Multicast9 = l2VpnIpv6Multicast10 = fcoe11 = mplsVpn12 = fcMpls13 = ipv6LocalLink14 = allProtocols · Integer32
This object indicates the Layer 3 protocol utilizing FIB TCAM resource. 'ipv4' - indicates Internet Protocol version 4. 'mpls' - indicates Multiprotocol Label Switching. 'eom' - indicates Ethernet over MPLS. 'ipv6' - indicates Internet Protocol version 6. 'ipv4Multicast' - indicates Internet Protocol version 4 for multicast traffic. 'ipv6Multicast' - indicates Internet Protocol version 6 for multicast traffic. 'l2VpnPeer' - indicates Layer 2 VPN Peer traffic. 'l2VpnIpv4Multicast' - indicates Internet Protocol version 4 for multicast traffic on Layer 2 VPN. 'l2VpnIpv6Multicast' - indicates Internet Protocol version 6 for multicast traffic on Layer 2 VPN. 'fcoe' - indicates Fibre Channel over Ethernet. 'mplsVpn' - indicates MPLS Layer 3 VPN aggregate labels. 'fcMpls' - indicates Fibre Channel over MPLS tunnels. 'ipv6LocalLink' - indicates Internet Protocol version 6 Local Link. 'allProtocols' - indicates all protocols within the entPhysicalIndex.
1.3.6.1.4.1.9.9.663.1.1.2.2.1.2
Unsigned32
This object indicates the number of FIB TCAM entries that are currently in use for the protocol denoted by cshcProtocolFibTcamProtocol.
1.3.6.1.4.1.9.9.663.1.1.2.2.1.3
Unsigned32
This object indicates the total number of FIB TCAM entries are currently allocated for the protocol denoted by cshcProtocolFibTcamProtocol. A value of zero indicates that the total number of FIB TCAM for the protocol denoted by cshcProtocolFibTcamProtocol is not available.
1.3.6.1.4.1.9.9.663.1.1.2.2.1.4
Unsigned32
This object indicates the number of logical FIB TCAM entries that are currently in use for the protocol denoted by cshcProtocolFibTcamProtocol.
1.3.6.1.4.1.9.9.663.1.1.2.2.1.5
Unsigned32
This object indicates the total number of logical FIB TCAM entries that are currently allocated for the protocol denoted by cshcProtocolFibTcamProtocol. A value of zero indicates that the total number of logical FIB TCAM for the protocol denoted by cshcProtocolFibTcamProtocol is not available.
1.3.6.1.4.1.9.9.663.1.1.2.2.1.6
INTEGER1 = singleWidth2 = doubleWidth3 = quadWidth · Integer32
This object indicates the entry width type for the protocol denoted by cshcProtocolFibTcamProtocol. 'singleWidth' - indicates each logical entry is using one physical entry. 'doubleWidth' - indicates each logical entry is using two physical entries. 'quadWidth' - indicates each logical entry is using four physical entries.
1.3.6.1.4.1.9.9.663.1.1.2.3
Index: entPhysicalIndex
This table contains adjacency capacity for each entity capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.2.3.1.1
Unsigned32
This object indicates the number of adjacency entries that are currently in use.
1.3.6.1.4.1.9.9.663.1.1.2.3.1.2
Unsigned32
This object indicates the total number of adjacency entries available.
1.3.6.1.4.1.9.9.663.1.1.2.4
Index: entPhysicalIndex
This table contains Layer 3 forwarding load information for each switching engine capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.2.4.1.1
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64 · pps
This object indicates the forwarding rate of Layer 3 packets.
1.3.6.1.4.1.9.9.663.1.1.2.4.1.2
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64 · pps
This object indicates the peak forwarding rate of Layer 3 packets.
1.3.6.1.4.1.9.9.663.1.1.2.4.1.3
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This object describes the time when the peak forwarding rate of Layer 3 packets denoted by cshcForwardingLoadPktPeakRate occurs. This object will contain 0-1-1,00:00:00.0 if the peak time information is not available.
1.3.6.1.4.1.9.9.663.1.1.2.5
Index: entPhysicalIndex · cshcAdjacencyResourceIndex
This table contains adjacency capacity per resource type and its usage for each entity capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.2.5.1.1
Unsigned32
This object indicates a unique value that identifies an adjacency resource.
1.3.6.1.4.1.9.9.663.1.1.2.5.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates a description of the adjacency resource.
1.3.6.1.4.1.9.9.663.1.1.2.5.1.3
Unsigned32
This object indicates the number of adjacency entries that are currently in use.
1.3.6.1.4.1.9.9.663.1.1.2.5.1.4
Unsigned32
This object indicates the total number of adjacency entries available.
1.3.6.1.4.1.9.9.663.1.1.2.6
Index: entPhysicalIndex · cshcMetResourceIndex
This table contains information regarding Multicast Expansion Table (MET) resource usage and utilization for a switching engine capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.2.6.1.1
Unsigned32
An arbitrary positive integer value that uniquely identifies a Met resource.
1.3.6.1.4.1.9.9.663.1.1.2.6.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates a description of the MET resource.
1.3.6.1.4.1.9.9.663.1.1.2.6.1.3
Gauge32
This object indicates the number of MET entries used by this MET resource.
1.3.6.1.4.1.9.9.663.1.1.2.6.1.4
Gauge32
This object indicates the total number of MET entries available for this MET resource.
1.3.6.1.4.1.9.9.663.1.1.2.6.1.5
Integer32 (-1..2147483647)
This object indicates the number of the multicast group for this MET resource. A value of -1 indicates that this object is not applicable on this MET feature.
1.3.6.1.4.1.9.9.663.1.1.2.7
Index: entPhysicalIndex · cshcForwardingResourceIndex
This table contains information regarding forwarding resource for each entity capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.1.2.7.1.1
Unsigned32 (1..2147483647)
An arbitrary positive integer value that uniquely identifies a forwarding table resource.
1.3.6.1.4.1.9.9.663.1.1.2.7.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the description of a forwarding table resource.
1.3.6.1.4.1.9.9.663.1.1.2.7.1.3
Unsigned32
This object indicates the value of a forwarding table resource.
1.3.6.1.4.1.9.9.663.1.2.1
Index: entPhysicalIndex
This table contains interface drops information on each module capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.2.1.1.1
Counter64 (0..18446744073709551615)
This object indicates the total dropped outbound packets on all physical interfaces of this module.
1.3.6.1.4.1.9.9.663.1.2.1.1.2
Counter64 (0..18446744073709551615)
This object indicates the total dropped inbound packets on all physical interfaces of this module.
1.3.6.1.4.1.9.9.663.1.2.1.1.3
InterfaceIndexOrZeroThis textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits the additional value of zero. the value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where interface was unknown, or when none or all interfaces need to be referenced. (0..2147483647) · Integer32 · hint d
This object indicates the ifIndex value of the interface that has the largest number of total dropped outbound packets among all the physical interfaces on this module. If there were no dropped outbound packets on any physical interfaces of this module, this object has the value 0. If there are multiple physical interfaces of this module having the same largest number of total dropped outbound packets, the ifIndex of the first such interfaces will be assigned to this object.
1.3.6.1.4.1.9.9.663.1.2.1.1.4
InterfaceIndexOrZeroThis textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits the additional value of zero. the value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where interface was unknown, or when none or all interfaces need to be referenced. (0..2147483647) · Integer32 · hint d
This object indicates the ifIndex value of the interface that has the largest number of total dropped inbound packets among all the physical interfaces of this module. If there were no dropped inbound packets on any physical interfaces of this module, this object has the value 0. If there are multiple physical interfaces of this module having the same largest number of total dropped inbound packets, the ifIndex of the first such interfaces will be assigned to this object.
1.3.6.1.4.1.9.9.663.1.2.1.1.5
CiscoInterfaceIndexListThis textual convention contains a list of ifIndex values. Each ifIndex value is represented by four octets. Every set of four octets represents a value of an instance of ifIndex object, defined in IF-MIB, corresponding to a particular interface. For example, the first octet to the fourth octet represent a value of the instance of ifIndex object for the first interface in the list. The fifth octet to the eighth octet represent a value of the instance of ifIndex object for the second interface in the list. Up to 64 interfaces can be represented by this textual convention. SIZE (0..256) · OCTET STRING
This object indicates the ifIndex values of the list of interfaces that have the largest number of total dropped outbound packets among all the physical interfaces of this module.
1.3.6.1.4.1.9.9.663.1.2.1.1.6
CiscoInterfaceIndexListThis textual convention contains a list of ifIndex values. Each ifIndex value is represented by four octets. Every set of four octets represents a value of an instance of ifIndex object, defined in IF-MIB, corresponding to a particular interface. For example, the first octet to the fourth octet represent a value of the instance of ifIndex object for the first interface in the list. The fifth octet to the eighth octet represent a value of the instance of ifIndex object for the second interface in the list. Up to 64 interfaces can be represented by this textual convention. SIZE (0..256) · OCTET STRING
This object indicates the ifIndex values of the list of interfaces that have the largest number of total dropped inbound packets among all the physical interfaces of this module.
1.3.6.1.4.1.9.9.663.1.2.2
Index: ifIndex
This table contains buffer capacity information for each physical interface capable of providing this information.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.663.1.2.2.1.1
Unsigned32 · bytes
The aggregate buffer size of all the transmit queues on this interface.
1.3.6.1.4.1.9.9.663.1.2.2.1.2
Unsigned32 · bytes
The aggregate buffer size of all the receive queues on this interface.
1.3.6.1.4.1.9.9.663.1.2.3
Index: entPhysicalIndex · cshcIntlChnlType
This table contains information for each internal channel interface on each physical entity, such as a module, capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.2.3.1.1
CshcInternalChannelType1 = eobc2 = ibcAn enumerated value indicating the type of an internal channel. eobc - ethernet out-of-band channel. ibc - in-band channel. · Integer32
The type of this internal channel.
1.3.6.1.4.1.9.9.663.1.2.3.1.2
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64 · packets per second
Five minute exponentially-decayed moving average of inbound packet rate for this channel.
1.3.6.1.4.1.9.9.663.1.2.3.1.3
Counter64 (0..18446744073709551615)
The total number of the inbound packets accounted for this channel.
1.3.6.1.4.1.9.9.663.1.2.3.1.4
Counter64 (0..18446744073709551615)
The number of dropped inbound packets for this channel.
1.3.6.1.4.1.9.9.663.1.2.3.1.5
CounterBasedGauge64The CounterBasedGauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615 decimal), and the minimum value can not be smaller than 0. The value of a CounterBasedGauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the CounterBasedGauge64 also decreases (increases). Note that this TC is not strictly supported in SMIv2, because the 'always increasing' and 'counter wrap' semantics associated with the Counter64 base type are not preserved. It is possible that management applications which rely solely upon the (Counter64) ASN.1 tag to determine object semantics will mistakenly operate upon objects of this type as they would for Counter64 objects. This textual convention represents a limited and short-term solution, and may be deprecated as a long term solution is defined and deployed to replace it. (0..18446744073709551615) · Counter64 · packets per second
Five minute exponentially-decayed moving average of outbound packet rate for this channel.
1.3.6.1.4.1.9.9.663.1.2.3.1.6
Counter64 (0..18446744073709551615)
The total number of the outbound packets accounted for this channel.
1.3.6.1.4.1.9.9.663.1.2.3.1.7
Counter64 (0..18446744073709551615)
The number of dropped outbound packets for this channel.
1.3.6.1.4.1.9.9.663.1.3.1
Index: cshcCPURateLimiterNetworkLayer
This table contains information regarding CPU rate limiters resources.
1.3.6.1.4.1.9.9.663.1.3.1.1.1
INTEGER1 = layer22 = layer33 = layer2Input4 = layer2Output · Integer32
This object indicates the network layer for which the CPU rate limiters are applied. 'layer2' - Layer 2. 'layer3' - Layer 3. 'layer2Input' - Ingress Layer 2. Applicable for devices which support CPU rate limiters on the Ingress Layer 2 traffic. 'layer2Output' - Egress Layer 2. Applicable for devices which support CPU rate limiters on the Egress Layer 2 traffic.
1.3.6.1.4.1.9.9.663.1.3.1.1.2
Unsigned32
This object indicates the total number of CPU rate limiters avaiable.
1.3.6.1.4.1.9.9.663.1.3.1.1.3
Unsigned32
This object indicates the number of CPU rate limiters that is currently in use.
1.3.6.1.4.1.9.9.663.1.3.1.1.4
Unsigned32
This object indicates the number of CPU rate limiters which is reserved by the switching device.
1.3.6.1.4.1.9.9.663.1.4.1
Index: entPhysicalIndex
This table contains information regarding ICAM (Internal Content Addressable Memory) Resource usage and utilization for a switching engine capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.4.1.1.1
Unsigned32
This object indicates the total number of ICAM entries created.
1.3.6.1.4.1.9.9.663.1.4.1.1.2
Unsigned32
This object indicates the number of ICAM entries which failed to be created.
1.3.6.1.4.1.9.9.663.1.4.1.1.3
PercentAn integer that is in the range of a percent value. (0..100) · Integer32
This object indicates the ICAM utlization in percentage in this switching engine.
1.3.6.1.4.1.9.9.663.1.5.1
Index: cshcNetflowFlowMaskAddrType · cshcNetflowFlowMaskIndex
This table contains information regarding Netflow flow mask features supported.
1.3.6.1.4.1.9.9.663.1.5.1.1.1
InetAddressType0 = unknown1 = ipv42 = ipv63 = ipv4z4 = ipv6z16 = dnsA value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address that is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Each definition of a concrete InetAddressType value must be accompanied by a definition of a textual convention for use with that InetAddressType. To support future extensions, the InetAddressType textual convention SHOULD NOT be sub-typed in object type definitions. It MAY be sub-typed in compliance statements in order to require only a subset of these address types for a compliant implementation. Implementations must ensure that InetAddressType objects and any dependent objects (e.g., InetAddress objects) are consistent. An inconsistentValue error must be generated if an attempt to change an InetAddressType object would, for example, lead to an undefined InetAddress value. In particular, InetAddressType/InetAddress pairs must be changed together if the address type changes (e.g., from ipv6(2) to ipv4(1)). · Integer32
This object indicates Internet address type for this flow mask.
1.3.6.1.4.1.9.9.663.1.5.1.1.2
Unsigned32
This object indicates the unique flow mask number for a specific Internet address type.
1.3.6.1.4.1.9.9.663.1.5.1.1.3
INTEGER1 = null2 = srcOnly3 = destOnly4 = srcDest5 = interfaceSrcDest6 = fullFlow7 = interfaceFullFlow8 = interfaceFullFlowOrFullFlow9 = atleastInterfaceSrcDest10 = atleastFullFlow11 = atleastInterfaceFullFlow12 = atleastSrc13 = atleastDst14 = atleastSrcDst15 = shortest16 = lessThanFullFlow17 = exceptFullFlow18 = exceptInterfaceFullFlow19 = interfaceDest20 = atleastInterfaceDest21 = interfaceSrc22 = atleastInterfaceSrc23 = srcOnlyCR24 = dstOnlyCR25 = fullFlowCR26 = interfaceFullFlowCR27 = max28 = conflict29 = err30 = unused31 = fullFlow132 = fullFlow233 = fullFlow334 = vlanFullFlow135 = vlanFullFlow236 = vlanFullFlow337 = reserved · Integer32
This object indicates the type of flow mask.
1.3.6.1.4.1.9.9.663.1.5.1.1.4
BITS
This object indicates the features supported by this flow mask.
1.3.6.1.4.1.9.9.663.1.6.1
Index: entPhysicalIndex · cshcNetflowResourceUsageIndex
This table contains information regarding Netflow resource usage and utilization for a switching engine capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.6.1.1.1
Unsigned32 (1..2147483647)
An arbitrary positive integer value that uniquely identifies a Netflow resource.
1.3.6.1.4.1.9.9.663.1.6.1.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates a description of the Netflow resource.
1.3.6.1.4.1.9.9.663.1.6.1.1.3
PercentAn integer that is in the range of a percent value. (0..100) · Integer32
This object indicates the Netflow resource usage in percentage value.
1.3.6.1.4.1.9.9.663.1.6.1.1.4
Gauge32
This object indicates the number of Netflow entries used by this Netflow resource.
1.3.6.1.4.1.9.9.663.1.6.1.1.5
Gauge32
This object indicates the number of Netflow entries available for this Netflow resource.
1.3.6.1.4.1.9.9.663.1.6.1.1.6
Integer32 (-1 | 0..2147483647)
This object indicates the number of Netflow entries which were failed to be created for this Netflow resource. A value of -1 indicates that this resource does not maintain this counter.
1.3.6.1.4.1.9.9.663.1.7.1
Index: entPhysicalIndex · cshcQosResourceType
This table contains QoS capacity per resource type and its usage for each entity capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.663.1.7.1.1.1
INTEGER1 = aggregatePolicers2 = distributedPolicers3 = policerProfiles · Integer32
This object indicates the QoS resource type.
1.3.6.1.4.1.9.9.663.1.7.1.1.2
Unsigned32
This object indicates the number of QoS entries that are currently in use.
1.3.6.1.4.1.9.9.663.1.7.1.1.3
Unsigned32
This object indicates the total number of QoS entries available.