csrlRateLimiterClassId
1.3.6.1.4.1.9.9.773.1.1.1.1.1
Unsigned32 (1..2147483647)
An arbitrary positive integer value that uniquely identifies a rate limiter class.
2011-05-16
This MIB module defines management objects for the Switch Rate Limiter features on Cisco Layer 2 and Layer 3 devices. Rate limits prevents redirected control packets for egress exceptions from overwhelming the supervisor module on a device.
Download CISCO-SWITCH-RATE-LIMITER-MIB.txt Open CISCO-SWITCH-RATE-LIMITER-MIB.txt in a new tab
| Name | OID |
|---|---|
| csrlRateLimiterClassTable | 1.3.6.1.4.1.9.9.773.1.1.1 |
| csrlGlobalRateLimiterTable | 1.3.6.1.4.1.9.9.773.1.2.1 |
| csrlLocalRateLimiterTable | 1.3.6.1.4.1.9.9.773.1.3.1 |
END OF TOC
1.3.6.1.4.1.9.9.773.1.1.1
Index: csrlRateLimiterClassId
A table containing descriptions of the rate limiter classes supported by the device.
1.3.6.1.4.1.9.9.773.1.1.1.1.1
Unsigned32 (1..2147483647)
An arbitrary positive integer value that uniquely identifies a rate limiter class.
1.3.6.1.4.1.9.9.773.1.1.1.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the description of the rate limiter class.
1.3.6.1.4.1.9.9.773.1.2.1
Index: csrlRateLimiterClassId
A table containing global configuration and statistics of rate limiter classes.
1.3.6.1.4.1.9.9.773.1.2.1.1.1
Integer32 (-1 | 0..2147483647) · packets per second
This object specifies the global rate limit configured for this rate limiter class. The global rate limit for this class is applied to every entity which does not have its local rate limit of same class configured, the value of the corresponding csrlLocalRateLimiterConfigured is -2. A value of -1 indicates that the global rate limit for this rate limiter class is disabled. A value of 0 indicates that the system does not allow any packets for this rate limiter class to go through the supervisor.
1.3.6.1.4.1.9.9.773.1.2.1.1.2
Counter64 (0..18446744073709551615) · packets
This object indicates the number of packets allowed globally for this rate limiter class. When the value of csrlGlobalRateLimiterConfigured is -1, the value of this object is always 0.
1.3.6.1.4.1.9.9.773.1.2.1.1.3
Counter64 (0..18446744073709551615) · packets
This object indicates the number of packets which have been dropped globally for this rate limiter class. When the value of csrlGlobalRateLimiterConfigured is -1, the value of this object is always 0.
1.3.6.1.4.1.9.9.773.1.2.1.1.4
Counter64 (0..18446744073709551615) · packets
This object indicates the total number of packets have been processed globally for this rate limiter class. When the value of csrlGlobalRateLimiterConfigured is -1, the value of this object is always 0.
1.3.6.1.4.1.9.9.773.1.3.1
Index: entPhysicalIndex · csrlRateLimiterClassId
A table containing local rate limiter configuration and statistics for a specific entity. For Example: A module on the device. A set of rate limiter class entries are added to this table when a rate limiter capable entity comes online. The same set of entries are deleted from this table when the entity goes offline.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.773.1.3.1.1.1
Integer32 (-2 | -1 | 0..2147483647) · packets per second
This object specifies the local rate limit configured for this rate limiter class on this entity. A value of -2 indicates that the entity does not have local rate limiter configured, and will pick up the configuration from csrlGlobalRateLimiterConfigured. A value of -1 indicates that this rate limiter class is disabled locally for this entity. A value of 0 indicates that the rate limiter does not allow any packets from this entity for this rate limiter class to go through the supervisor.
1.3.6.1.4.1.9.9.773.1.3.1.1.2
Counter64 (0..18446744073709551615) · packets
This object indicates the number of packets allowed on this entity for this rate limiter class. When the value of csrlLocalRateLimiterConfigured is -1, the value of this object is always 0.
1.3.6.1.4.1.9.9.773.1.3.1.1.3
Counter64 (0..18446744073709551615) · packets
This object indicates the number of packets dropped on this entity for this rate limiter class. When the value of csrlLocalRateLimiterConfigured is -1, the value of this object is always 0.
1.3.6.1.4.1.9.9.773.1.3.1.1.4
Counter64 (0..18446744073709551615) · packets
This object indicates the number of packets processed on this entity for this rate limiter class. When the value of csrlLocalRateLimiterConfigured is -1, the value of this object is always 0.