csstConfigStatsMapSize
1.3.6.1.4.1.9.9.652.1.1.2
Unsigned32
Indicates the length of the csstConfigStatsMap object. This object value indicates the total number of traffic statistics options that can be configured in csstConfigStatsMap.
2013-01-30
The MIB module provides management information for configuration and monitoring of traffic statistics on Cisco's switching devices.
Download CISCO-SWITCH-STATS-MIB.txt Open CISCO-SWITCH-STATS-MIB.txt in a new tab
| Name | OID |
|---|---|
| csstConfigStatsMapSize | 1.3.6.1.4.1.9.9.652.1.1.2 |
| csstConfigStatsMap | 1.3.6.1.4.1.9.9.652.1.1.3 |
END OF TOC
1.3.6.1.4.1.9.9.652.1.1.2
Unsigned32
Indicates the length of the csstConfigStatsMap object. This object value indicates the total number of traffic statistics options that can be configured in csstConfigStatsMap.
1.3.6.1.4.1.9.9.652.1.1.3
OCTET STRING SIZE (0..256)
Specifies the sequence of the traffic statistics options that are configured to be collected by the device. The length of this object is specified by the csstConfigStatsMapSize object value, and the value of each octet in the instance value of this object shall be unique and can only be selected from the set of csstConfigStatsOptionIndex values currently populated in csstConfigStatsOptionTable. If a traffic statistics option is configured in this object, the corresponding network traffic statistics will be collected on all the applicable interfaces in this device. Setting this object to a different value will trigger the csstConfigStatsIfTable to be repopulated.
1.3.6.1.4.1.9.9.652.1.1.1
Index: csstConfigStatsOptionIndex
This table contains a list of network traffic statistics options capable to be configured in csstConfigStatsMap for the statistics collection by the device.
1.3.6.1.4.1.9.9.652.1.1.1.1.1
Unsigned32 (1..4294967295)
A unique value to indicate a specific traffic statistics option.
1.3.6.1.4.1.9.9.652.1.1.1.1.2
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
Indicates the description corresponding to a specific traffic statistics option.
1.3.6.1.4.1.9.9.652.1.1.4
Index: ifIndex
This table contains information about interface traffic statistics, which is configured through csstConfigStatsMap, for interfaces that are capable of providing such information. The total number of traffic statistics and the traffic statistics options populated in this table will be based on csstConfigStatsMapSize and csstConfigStatsMap. When the csstConfigStatsMap object value is changed to a different value, it will trigger this table to be repopulated.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.9.9.652.1.1.4.1.1
Counter64 (0..18446744073709551615) · packets
The total number of packets counted on this interface for the traffic statistics option that is specified by the first octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.2
Counter64 (0..18446744073709551615) · octets
The total number of octets counted on this interface for the traffic statistics option that is specified by the first octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.3
Counter64 (0..18446744073709551615) · packets
The total number of packets counted on this interface for the traffic statistics option that is specified by the second octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.4
Counter64 (0..18446744073709551615) · octets
The total number of octets counted on this interface for the traffic statistics option that is specified by the second octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.5
Counter64 (0..18446744073709551615) · packets
The total number of packets counted on this interface for the traffic statistics option that is specified by the third octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.6
Counter64 (0..18446744073709551615) · octets
The total number of octets counted on this interface for the traffic statistics option that is specified by the third octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.7
Counter64 (0..18446744073709551615) · packets
The total number of packets counted on this interface for the traffic statistics option that is specified by the fourth octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.8
Counter64 (0..18446744073709551615) · octets
The total number of octets counted on this interface for the traffic statistics option that is specified by the fourth octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.9
Counter64 (0..18446744073709551615) · packets
The total number of packets counted on this interface for the traffic statistics option that is specified by the fifth octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.10
Counter64 (0..18446744073709551615) · octets
The total number of octets counted on this interface for the traffic statistics option that is specified by the fifth octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.11
Counter64 (0..18446744073709551615) · packets
The total number of packets counted on this interface for the traffic statistics option that is specified by the sixth octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.12
Counter64 (0..18446744073709551615) · octets
The total number of octets counted on this interface for the traffic statistics option that is specified by the sixth octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.13
Counter64 (0..18446744073709551615) · packets
The total number of packets counted on this interface for the traffic statistics option that is specified by the seventh octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.14
Counter64 (0..18446744073709551615) · octets
The total number of octets counted on this interface for the traffic statistics option that is specified by the seventh octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.15
Counter64 (0..18446744073709551615) · packets
The total number of packets counted on this interface for the traffic statistics option that is specified by the eighth octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.1.4.1.16
Counter64 (0..18446744073709551615) · octets
The total number of octets counted on this interface for the traffic statistics option that is specified by the eighth octet value of the csstConfigStatsMap object.
1.3.6.1.4.1.9.9.652.1.2.1
Index: csstVlanIndex
This table provides specific traffic statistics information for VLANs that are capable of providing such statistics information.
1.3.6.1.4.1.9.9.652.1.2.1.1.1
VlanIndexA value used to index per-VLAN tables: values of 0 and 4095 are not permitted. If the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095, then it represents a VLAN with scope local to the particular agent, i.e., one without a global VLAN-ID assigned to it. Such VLANs are outside the scope of IEEE 802.1Q, but it is convenient to be able to manage them in the same way using this MIB. · Unsigned32 · hint d
Indicates the VLAN number.
1.3.6.1.4.1.9.9.652.1.2.1.1.2
Counter64 (0..18446744073709551615) · packets
The total number of bridged unicast packets, counted on this VLAN, with known MAC (Media Access Control) DA (destination address).
1.3.6.1.4.1.9.9.652.1.2.1.1.3
Counter64 (0..18446744073709551615) · octets
The total number of octets for the bridged unicast packets, counted on this VLAN, with known MAC DA.
1.3.6.1.4.1.9.9.652.1.2.1.1.4
Counter64 (0..18446744073709551615) · packets
The total number of bridged non-unicast packets, counted on this VLAN, with known MAC DA.
1.3.6.1.4.1.9.9.652.1.2.1.1.5
Counter64 (0..18446744073709551615) · octets
The total number of octets for the bridged non-unicast packets, counted on this VLAN, with known MAC DA.
1.3.6.1.4.1.9.9.652.1.3.1
Index: entPhysicalIndex
This table provides specific L2/L3 traffic statistics information of switching engines.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.652.1.3.1.1.1
Counter32 · packets
The total number of bridged packets on this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.2
Counter32 · packets
The total number of IPv4 Unicast packets, switched by the FIB (Forwarding Information Base) on this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.3
Counter32 · packets
The total number of IPv6 Unicast packets, switched by the FIB (Forwarding Information Base) on this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.4
Counter32 · packets
The total number of EoMPLS (Ethernet over MPLS) packets switched by the FIB Forwarding Information Base) on this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.5
Counter32 · packets
The total number of MPLS (Multiprotocol Label Switching) packets switched by the FIB Forwarding Information Base) on this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.6
Counter32 · packets
The total number of Multicast packets switched at Layer3 by this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.7
Counter32 · packets
The total number of IGMP MLD (Multicast Listener Discovery) packets switched by this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.8
Counter32 · packets
The total number of IPv4 Multicast packets switched at Layer3 by this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.9
Counter32 · packets
The total number of IPv6 Multicast packets switched at Layer3 by this switching engine.
1.3.6.1.4.1.9.9.652.1.3.1.1.10
Counter32 · packets
The total number of Multicast Reverse Path Forwarding (RPF) check failed packets which are leaked to the CPU for processing.
1.3.6.1.4.1.9.9.652.1.3.1.1.11
Counter32 · packets
The total number of Input ACL(Access Control List) Routed packets.
1.3.6.1.4.1.9.9.652.1.3.1.1.12
Counter32 · packets
The total number of Output ACL Routed packets.
1.3.6.1.4.1.9.9.652.1.3.1.1.13
Counter32 · packets
The total number of Input Netflow Switched packets.
1.3.6.1.4.1.9.9.652.1.3.1.1.14
Counter32 · packets
The total number of Output Netflow Switched packets.
1.3.6.1.4.1.9.9.652.1.3.1.1.15
Counter32 · packets
The total number of Input packets which are redirected to the CPU due to an exception.
1.3.6.1.4.1.9.9.652.1.3.1.1.16
Counter32 · packets
The total number of Output packets which are redirected to the CPU due to an exception.
1.3.6.1.4.1.9.9.652.1.3.1.1.17
Counter32 · packets
This object indicates the total number of Netflow switched packets.
1.3.6.1.4.1.9.9.652.1.3.1.1.18
Counter32 · packets
This object indicates the total number of ACL routed packets.
1.3.6.1.4.1.9.9.652.1.3.1.1.19
Counter32 · packets
This object indicates the total number of ACL deny packets.
1.3.6.1.4.1.9.9.652.1.4.1
Index: entPhysicalIndex · csstHwInternalStatsDeviceId · csstHwInternalStatsInstanceNum · csstHwInternalStatsDirection · csstHwInternalStatsType · csstHwInternalStatsIndex
This table contains a list of traffic statistics collection for internal devices of a specific physical entity that is capable of providing this information. Such physical entity is identified by the entPhysicalIndex in ENTITY-MIB.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.652.1.4.1.1.1
Unsigned32
This object indicates an arbitrary number which uniquely identifies a specific internal device.
1.3.6.1.4.1.9.9.652.1.4.1.1.2
Unsigned32
This object indicates an arbitrary number which uniquely identifies the instance number of a specific internal device.
1.3.6.1.4.1.9.9.652.1.4.1.1.3
INTEGER1 = ingressIn2 = ingressOut3 = egressIn4 = egressOut · Integer32
This object indicates the flow direction of a specific traffic statistics.
1.3.6.1.4.1.9.9.652.1.4.1.1.4
INTEGER1 = packetsPerSec2 = bytesPerSec · Integer32
This object indicates the flow type of a specific traffic statistics.
1.3.6.1.4.1.9.9.652.1.4.1.1.5
Unsigned32
This object indicates an arbitrary integer which uniquely identifies a specific traffic statistics.
1.3.6.1.4.1.9.9.652.1.4.1.1.6
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the internal device name and port list of a specific traffic statistics.
1.3.6.1.4.1.9.9.652.1.4.1.1.7
Gauge32
This object indicates the rate of a specific traffic statistics.
1.3.6.1.4.1.9.9.652.1.4.2
Index: entPhysicalIndex · csstHwInternalErrorDeviceId · csstHwInternalErrorCategory
This table contains a list of internal error statistics for internal devices of a specific physical entity that is capable of providing this information. Such physical entity is identified by the entPhysicalIndex in ENTITY-MIB.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.652.1.4.2.1.1
Unsigned32
This object indicates an arbitrary number which uniquely identifies a specific internal device.
1.3.6.1.4.1.9.9.652.1.4.2.1.2
INTEGER1 = error2 = congestion3 = qos · Integer32
This object indicates the statistics category.
1.3.6.1.4.1.9.9.652.1.4.2.1.3
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the name and role of a specific internal device.
1.3.6.1.4.1.9.9.652.1.4.2.1.4
DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d
This object indicates the most recent time the error statistics was cleared.
1.3.6.1.4.1.9.9.652.1.4.3
Index: entPhysicalIndex · csstHwInternalErrorDeviceId · csstHwInternalErrorCategory · csstHwInternalErrorInstNum · csstHwInternalErrorInstErrorId
This table contains a list of internal error instance management information for internal devices.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.652.1.4.3.1.1
Unsigned32
This object indicates an arbitrary number which uniquely identifies the instance number of a specific internal device.
1.3.6.1.4.1.9.9.652.1.4.3.1.2
Unsigned32
This object indicates an arbitrary number which uniquely identifies the internal error.
1.3.6.1.4.1.9.9.652.1.4.3.1.3
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the internal error description. A zero-length string indicates that the internal error description is not available.
1.3.6.1.4.1.9.9.652.1.4.3.1.4
Counter64 (0..18446744073709551615)
This object indicates the count of internal error.
1.3.6.1.4.1.9.9.652.1.4.3.1.5
SnmpAdminStringAn octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC3416]. Note that the size of an SnmpAdminString object is measured in octets, not characters. SIZE (0..255) · OCTET STRING · hint 255t
This object indicates the internal ports that generated the error. A zero-length string indicates that the internal ports information is not available.
1.3.6.1.4.1.9.9.652.1.5.1
Index: entPhysicalIndex · csstRewriteEngineChannelIndex
This table contains packet drop information for each channel of a rewrite engine on each physical entity, sush as a module capable of providing this information.
from ENTITY-MIB
PhysicalIndexAn arbitrary value that uniquely identifies the physical entity. The value should be a small positive integer. Index values for different physical entities are not necessarily contiguous. (1..2147483647) · Integer32 · hint d
The index for this entry.
1.3.6.1.4.1.9.9.652.1.5.1.1.1
Unsigned32
The channel number of a rewrtie engine on a given module.
1.3.6.1.4.1.9.9.652.1.5.1.1.2
Counter64 (0..18446744073709551615) · packets
This object indicates the total number of rewrite engine dropped packets.
1.3.6.1.4.1.9.9.652.1.5.1.1.3
Counter32
This object indicates the total number of counter overruns.