CISCO-USP-MIB

DateAndTimeA date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. SIZE (8 | 11) · OCTET STRING · hint 2d-1d-1d,1d:1d:1d.1d,1a1d:1d

This object gives the time stamp in date and time when the call counter was last reset. All counters related to calls, CPS and messages would be reset when counter is reset.

INTEGER1 = up2 = down · Integer32

This object gives the CUSP system state. 'up' - System is up. 'down' - System is either offline or going down.

TimeStampThe value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset to zero as a result of a re- initialization of the network management (sub)system, then the values of all TimeStamp objects are also reset. However, after approximately 497 days without a re- initialization, the sysUpTime object will reach 2^^32-1 and then increment around to zero; in this case, existing values of TimeStamp objects do not change. This can lead to ambiguities in the value of TimeStamp objects. · TimeTicks

This object gives the CUSP system up time information.

Unsigned32 (0..10000) · CPS

This object gives the maximum licensed CPS limit value. Calls will be rejected if the license limit is exceeded.

INTEGER1 = waiting2 = overage3 = outofcompliance4 = notapplicable5 = invalidtag6 = invalid7 = init8 = incompliance9 = evalexpired10 = eval11 = disabled12 = authorizedperiodexpired · Integer32

This object gives the current license state of the CUSP. 'waiting' - The initial state after an entitlement request while waiting for the authorization request response. 'overage' - The entitlement is in overage. 'outofcompliance' - Requested entitlement is more than the available count. All calls will be rejected. 'notapplicable' - Enforcement mode is not applicable. 'invalidtag' - The entitlement tag is invalid. 'invalid' - Error condition state. 'init' - The initial state after the instance is created but before the entitlement is requested with. 'incompliance' - License registration and entitlement succeeded. 'evalexpired' - Evaluation period has expired. 'eval' - CUSP is using the evaluation period for this entitlement. 'disabled' - Smart Licensing has been deactivated or disabled. 'authorizedperiodexpired' - The authorized period has expired.

INTEGER1 = unconfigured2 = unidentified3 = evalexpired4 = registered5 = outofcomplaince6 = authorized7 = authorizationexpiry8 = transient · Integer32

This object gives the current license state of the Smart License Agent. 'unconfigured' - Smart licensing agent is not enabled and and all calls will be rejected in this state. 'unidentified' - Smart licensing is enabled and entitlement information is sent to the agent. Calls will be allowed in this state. 'evalexpired' - Smart agent will move to this state when evaluation period expires. All calls will be rejected in this state. 'transient' - Smart agent is in transient state. 'registered' - CUSP registered with the cloud server but license not yet authorized. 'outofcompliance' - Requested entitlement is more than the available count. All calls will be rejected. 'authorized' - License registration and entitlement succeeded. 'authorizationexpiry' - Renew request failed for more than 90 days. All calls will be rejected.

Unsigned32 · MegaByte

This object gives the total memory (RAM) in MB(MegaByte) configured on CUSP.

Unsigned32 · MegaByte

This object gives the CUSP current memory (RAM) usage information in MB (MegaByte).

Integer32

This object gives the current disk utilization of CUSP in MB (Mega Byte).

Counter32

This object gives the total number of calls since the last counter reset.

Counter32

This object gives the total number of failed calls since last counter reset.

Unsigned32 · CPS

This object gives the current running Calls Per Second (CPS) information.

Unsigned32 · CPS

This object gives the average CPS (Calls Per Second) in the last one minute.

Unsigned32 · CPS

This object gives the Maximum value of CPS (Calls Per Second) in the last one minute.

Unsigned32

This object gives the count on number of calls dropped in the last one second.

Unsigned32

This object gives the average of 'dropped calls per second' in the last one minute.

Unsigned32

This object gives the Maximum of 'dropped calls per second' in the last one minute.

Unsigned32

This object gives the number of calls routed through CUSP in last one second.

Unsigned32

This object gives the average of 'calls routed per second' in last one minute.

Unsigned32

This object gives the maximum of 'calls routed per second' in the last one minute.

Unsigned32 · CPS

This object gives the total calls dropped due to exceeding license limit.

Unsigned32 · Messages

This object gives the number of stray messages information. Stray messages are messages for which CUSP doesn't have a transaction.

Unsigned32

This object gives the total number of messages received.

Integer32 (1..100)

The percentage threshold value configured by the user. If the percentage disk space utilization exceeds this limit then cuspDiskSpaceThresholdAlert notification is sent.

Integer32 (1..100)

The percentage threshold value configured by the user. If the percentage memory utilization exceeds this limit then cuspMemoryThresholdAlert notification is sent.

INTEGER1 = error2 = warning3 = informational · Integer32

The classification on the event severity. 'error' - Significant problem. 'warning' - Not immediately significant. 'informational' - Information only.

OCTET STRING SIZE (0..255)

This object gives the detailed information on error encountered.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls generation of cuspSystemStateAlert. When this is 'true', generation of Notification is enabled and when this variable is 'false', generation of Notification is disabled.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspServerGroupAlert.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspServerGroupElementAlert

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspLicenseExceededAlert.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspLicenseStateAlert.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspExtensiveLoggingAlert.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspDiskSpaceThresholdAlert.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspMemoryThresholdAlert.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspBackupProcessFailAlert notification.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspConnectionExceptionAlert.

TruthValue1 = true2 = falseRepresents a boolean value. · Integer32

This variable controls the generation of cuspSipMessageQueueOverflowAlert

This notification is generated when the CUSP system goes up/down. This notification can be enabled/disabled by setting cuspSystemStateAlertEnable.

This notification is generated when server group element status changes. This notification can be enabled/disabled by setting cuspServerGroupElementAlertEnable.

This notification is generated when all the elements in the server group goes down or when any one element in the server group comes up after all the elements in the group were down. This notification can be enabled/disabled by setting cuspServerGroupAlertEnable.

This notification is generated when CUSP memory usage exceeds the cuspMemoryThresholdValue. This notification can be enabled/disabled by setting cuspMemoryThresholdAlertEnable.

This notification is generated when average CPS exceeds cuspLicenseLimit. This notification can be enabled/disabled by setting cuspLicenseExceededAlertEnable.

This notification is generated when CUSP license state changes. This notification can be enabled/disabled by setting cuspLicenseStateAlertEnable.

This notification is generated when extensive debug level logging is enabled in CUSP. Extensive logging might impact the performance and system stability. This notification can be enabled/disabled by setting cuspExtensiveLoggingAlertEnable.

This notification is generated when the CUSP Disk usage exceeds the cuspDiskSpaceThresholdValue. This notification can be enabled/disabled by setting cuspDiskSpaceThresholdAlertEnable.

This notification is generated when back up process fails. This notification can be enabled/disabled by setting cuspBackupProcessFailAlertEnable.

This notification is generated when a connection exception occurs. This notification can be enabled/disabled by setting cuspConnectionExceptionAlertEnable.

This notification is generated when CUSP system queues gets full. Queue full indicates CUSP is either over loaded or encountering network issues. This notification can be enabled/disabled by setting cuspSipMessageQueueOverflowAlertEnable.