ciscoVdNtpSyncStatus
1.3.6.1.4.1.9.9.1051.2.3
Integer32 (-1..1)
It describe the Cisco Vision director NTP sync status 0 : Sync 1 : unsync -1 : Unknown
CISCO-VISION-MIB
2021-04-07
Cisco Vision MIB is to report the status of Cisco Vision Director.
Download CISCO-VISION-MIB.txt Open CISCO-VISION-MIB.txt in a new tab
SCALARS (14) · TABLES (2) · TRAPS (4)
Scalars (14)
Tables (2)
| Name | OID |
|---|---|
| ciscoVdServiceTable | 1.3.6.1.4.1.9.9.1051.2.1.1 |
| ciscoVdDmpStatusTable | 1.3.6.1.4.1.9.9.1051.2.2.1 |
Traps (4)
| Name | OID |
|---|---|
| ciscoVdServiceStatusNotifs | 1.3.6.1.4.1.9.9.1051.0.1 |
| ciscoVdBackupTaskNotifs | 1.3.6.1.4.1.9.9.1051.0.2 |
| ciscoVdNtpNotifs | 1.3.6.1.4.1.9.9.1051.0.3 |
| ciscoVdHdmiUpDwnNotifs | 1.3.6.1.4.1.9.9.1051.0.4 |
END OF TOC
Scalar details
ciscoVdBkpStatus
1.3.6.1.4.1.9.9.1051.2.4
Integer32 (-1..1)
It refers Cisco Vision director system backup status 0 : Success 1 : failure -1 : Unknown
ciscoVisionDmpTvOnOff
1.3.6.1.4.1.9.9.1051.3.1
Integer32 (-1..1)
This field represents the dmp Tv on Of status 0 : On 1 : Off -1 : Unknown
ciscoVisionDmpNtpStatus
1.3.6.1.4.1.9.9.1051.3.2
Integer32 (-1..1)
This field represents the NTP sync and Unsync 0 : sync 1 : Unsync -1 : Unknown
ciscoVisionDmpPTPstatus
1.3.6.1.4.1.9.9.1051.3.3.1
Integer32 (-1..1)
This field represents PTP sync status (freerun/master) 0 : sync 1 : Unsync -1 : Unknown
ciscoVisionDmpPTPMaster
1.3.6.1.4.1.9.9.1051.3.3.2
Integer32 (-1..1)
Mater or slave 0 : Master 1 : Slave
ciscoVisionDmpPTPDeviation
1.3.6.1.4.1.9.9.1051.3.3.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Deviation from master
ciscoVisionDmpInterfaceDesc
1.3.6.1.4.1.9.9.1051.3.4.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
A textual string containing information about the interface.
ciscoVisionDmpBytesIn
1.3.6.1.4.1.9.9.1051.3.4.2
Integer32
This field represents DMP Byte In for an interface.
ciscoVisionDmpBytesOut
1.3.6.1.4.1.9.9.1051.3.4.3
Integer32
The total number of bytes transmitted out of the interface, including framing characters
ciscoVisionDmpPktCnt
1.3.6.1.4.1.9.9.1051.3.4.4
Integer32
The total number of octets transmitted out of the interface, including framing characters
ciscoVisionDmpPktErrCnt
1.3.6.1.4.1.9.9.1051.3.4.5
Integer32
The total number Error of octets transmitted out of the interface, including framing characters
ssCpuRawUser
1.3.6.1.4.1.9.9.1051.3.5.1
Integer32
This field represents the cup raw user for DMP
ssCpuRawIdle
1.3.6.1.4.1.9.9.1051.3.5.2
Integer32
This field represents the cup raw Idle for DMP
Table details
ciscoVdServiceTable
1.3.6.1.4.1.9.9.1051.2.1.1
Index: ciscoVdDsdServiceName
This table consists of the status attribute of diffrent services inside DSD like config, control, monitor, localcontrol, broker, CMS and Menu.
ciscoVdDsdServiceName
1.3.6.1.4.1.9.9.1051.2.1.1.1.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..100) · OCTET STRING · hint 255a
Represents the name of one service within DSD
ciscoVdDsdServiceStatus
1.3.6.1.4.1.9.9.1051.2.1.1.1.2
Integer32 (-1..1)
The status of the each of the service in DSD. This status represents whether a service is running or is it down. 0 running 1 stopped -1 unknown
ciscoVdDsdServiceDesc
1.3.6.1.4.1.9.9.1051.2.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Represents the description of one service within DSD
ciscoVdDmpStatusTable
1.3.6.1.4.1.9.9.1051.2.2.1
Index: ciscoVdDmpIP
This table consists the attributes of DMPs that are required to be trackd. This includes HDMI up/down status ,DMP up/down status.
ciscoVdDmpIP
1.3.6.1.4.1.9.9.1051.2.2.1.1.1
IpAddress SIZE (4)
Represents the IP-Address of the individual DMP
ciscoVdHdmiUpDownStatus
1.3.6.1.4.1.9.9.1051.2.2.1.1.2
Integer32 (-1..1)
Represents the HDMI connectivity status to play the external video streams and content 1 On 0 Off -1 unknown
ciscoVdDmpStatus
1.3.6.1.4.1.9.9.1051.2.2.1.1.3
Integer32 (-1..1)
Represents if the DMP is in online of offline mode. 0 : Up 1 : Down -1 : unkonwn
ciscoVdDmpidentifier
1.3.6.1.4.1.9.9.1051.2.2.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Represents the identifier of the DMP
Trap details
ciscoVdServiceStatusNotifs
1.3.6.1.4.1.9.9.1051.0.1
This is notification for service status
ciscoVdDsdServiceStatus
1.3.6.1.4.1.9.9.1051.2.1.1.1.2
Integer32 (-1..1)
The status of the each of the service in DSD. This status represents whether a service is running or is it down. 0 running 1 stopped -1 unknown
ciscoVdDsdServiceDesc
1.3.6.1.4.1.9.9.1051.2.1.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Represents the description of one service within DSD
ciscoVdBackupTaskNotifs
1.3.6.1.4.1.9.9.1051.0.2
This is notification for user backup
ciscoVdBkpStatus
1.3.6.1.4.1.9.9.1051.2.4
Integer32 (-1..1)
It refers Cisco Vision director system backup status 0 : Success 1 : failure -1 : Unknown
ciscoVdNtpNotifs
1.3.6.1.4.1.9.9.1051.0.3
This is notification for NTP sync or unsync status
ciscoVdNtpSyncStatus
1.3.6.1.4.1.9.9.1051.2.3
Integer32 (-1..1)
It describe the Cisco Vision director NTP sync status 0 : Sync 1 : unsync -1 : Unknown
ciscoVdHdmiUpDwnNotifs
1.3.6.1.4.1.9.9.1051.0.4
This is notification for DMP HDMI TV On/Off
ciscoVdHdmiUpDownStatus
1.3.6.1.4.1.9.9.1051.2.2.1.1.2
Integer32 (-1..1)
Represents the HDMI connectivity status to play the external video streams and content 1 On 0 Off -1 unknown
ciscoVdDmpidentifier
1.3.6.1.4.1.9.9.1051.2.2.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
Represents the identifier of the DMP