EZ5 MIB Catalog

CISCO-VOICE-CARD-MIB

2002-02-15

The MIB module to configure voice-card specific parameters such as codec complexity in voice- enabled cisco routers.

Download CISCO-VOICE-CARD-MIB.txt Open CISCO-VOICE-CARD-MIB.txt in a new tab

TABLES (1)

Tables (1)

NameOID
cVoiceCardTable1.3.6.1.4.1.9.9.300576.1.1

END OF TOC

Table details

cVoiceCardTable

1.3.6.1.4.1.9.9.300576.1.1

Index: cVoiceCardIndex

A list of voice card entries. The number of entries is the number of slots in the router.

cVoiceCardIndex

1.3.6.1.4.1.9.9.300576.1.1.1.1

Unsigned32 (1..255)

A unique value, greater than zero, used to index the cVoiceCardTable.

cVoiceCardSlotNumber

1.3.6.1.4.1.9.9.300576.1.1.1.2

Unsigned32 (0..255)

The slot number of the slot containing this voice card.

cVoiceCardCodecComplexity

1.3.6.1.4.1.9.9.300576.1.1.1.3

INTEGER2 = hc4 = mc · Integer32

Determines whether the voice ports in the card can support all codecs or not. Medium complexity configuration can not support all codecs, while High Complexity configuration supports all codecs. The card may support all types of codecs listed, but the NMS setting a value will force the card only to use the codecs limited by the Codec Complexity configured.

cVoiceCardAdminStatus

1.3.6.1.4.1.9.9.300576.1.1.1.4

INTEGER1 = up2 = down · Integer32

Administrative status of the voice card. The voice card is administratively down if all voice ports are shut. The agent changes the status whenever the status of the voice card changes in the router. The voice card changes state immediately when the NMS changes the state of this object.

↑ To TOC