InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsSectionStatisticalAlarmSeverity
1.3.6.1.4.1.351.150.3.1.1.1.1.1
INTEGER1 = minor2 = major3 = none · Integer32
By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm.
cwsSectionCurrentESsThreshold
1.3.6.1.4.1.351.150.3.1.1.1.1.2
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for errored seconds(ES), for the current 15-min interval, above which alarm is generated.
cwsSectionTotalESsThreshold
1.3.6.1.4.1.351.150.3.1.1.1.1.3
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for errored seconds(ES), for the 24 hour interval, above which alarm is generated.
This object indicates the threshold for severely errored framing seconds(SEFS) for the 24 hour interval, above which alarm is generated.
cwsSectionCurrentCVsThreshold
1.3.6.1.4.1.351.150.3.1.1.1.1.8
Unsigned32 (0..2147483647) · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for coding violations(CV), above which alarm is generated.
cwsSectionTotalCVsThreshold
1.3.6.1.4.1.351.150.3.1.1.1.1.9
Unsigned32 (0..2147483647) · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for coding violations(CV) for 24 hour interval, above which alarm is generated.
cwsSectionStatAlarmStatus
1.3.6.1.4.1.351.150.3.1.1.1.1.10
Unsigned32 (1..511)
This variable indicates the status of the interface. When an alarm is raised, this would indicate which threshold was exceeded. This object is updated every 15-minutes. Once the current 15-min window has passed, and there are no errors in the current 15-min window, the object is cleared from the lower level sonet task. The cwsSectionStatAlarmStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. If none of the bits are set, it indicates no defect. The various bit positions are:
1 sonetSectionTotalESs
2 sonetSectionTotalSESs
3 sonetSectionTotalSEFSs
4 sonetSectionTotalCVs
5 sonetSectionCurrentESs
6 sonetSectionCurrentSESs
7 sonetSectionCurrentSEFSs
8 sonetSectionCurrentCVs
cwsSectionCurrent24HrTable
1.3.6.1.4.1.351.150.3.1.1.2
Index: ifIndex
Contains sonet section related current 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsSectionCurrent24HrTable table get reset to 0.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsSectionCurrent24HrESs
1.3.6.1.4.1.351.150.3.1.1.2.1.1
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of errored seconds encountered in current 24 hour interval.
cwsSectionCurrent24HrSESs
1.3.6.1.4.1.351.150.3.1.1.2.1.2
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of SESs encountered in current 24 hour interval.
cwsSectionCurrent24HrSEFSs
1.3.6.1.4.1.351.150.3.1.1.2.1.3
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored framing seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of SEFSs encountered in current 24 hour interval.
cwsSectionCurrent24HrCVs
1.3.6.1.4.1.351.150.3.1.1.2.1.4
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of CVs encountered in current 24 hour interval.
cwsSectionPrevious24HrTable
1.3.6.1.4.1.351.150.3.1.1.3
Index: ifIndex
Contains sonet section previous 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsSectionPrevious24HrTable table get reset to 0.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsSectionPrevious24HrESs
1.3.6.1.4.1.351.150.3.1.1.3.1.1
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of errored seconds encountered in previous 24 hour interval.
cwsSectionPrevious24HrSESs
1.3.6.1.4.1.351.150.3.1.1.3.1.2
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of SESs encountered in previous 24 hour interval.
cwsSectionPrevious24HrSEFSs
1.3.6.1.4.1.351.150.3.1.1.3.1.3
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored framing seconds
Reference: RFC2558 Section 3.5,GR-253-CORE
Number of SEFSs encountered in previous 24 hour interval.
cwsSectionPrevious24HrCVs
1.3.6.1.4.1.351.150.3.1.1.3.1.4
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of CVs encountered in previous 24 hour interval.
cwsLineAlarmTable
1.3.6.1.4.1.351.150.3.1.2.1
Index: ifIndex
The SONET/SDH Line Alarm table. This table contains objects which are thresholds that the user can set. Once the threshold is exceeded,
an alarm is flagged.Changing any threshold will affect both
the Near End and Far End(remote end of the line) threshold.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsLineStatisticalAlarmSeverity
1.3.6.1.4.1.351.150.3.1.2.1.1.1
INTEGER1 = minor2 = major3 = none · Integer32
By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm.
cwsLineCurrentESsThreshold
1.3.6.1.4.1.351.150.3.1.2.1.1.2
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for errored seconds(ES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineTotalESsThreshold
1.3.6.1.4.1.351.150.3.1.2.1.1.3
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for errored seconds(ES) for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineCurrentSESsThreshold
1.3.6.1.4.1.351.150.3.1.2.1.1.4
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the severely errored seconds(SES) threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineTotalSESsThreshold
1.3.6.1.4.1.351.150.3.1.2.1.1.5
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the severely errored seconds(SES) threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineCurrentCVsThreshold
1.3.6.1.4.1.351.150.3.1.2.1.1.6
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the Coding violations(CV) threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineTotalCVsThreshold
1.3.6.1.4.1.351.150.3.1.2.1.1.7
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the Coding violations(CV) threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineCurrentUASsThreshold
1.3.6.1.4.1.351.150.3.1.2.1.1.8
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the Unavailable Seconds(UAS) threshold for the current 15-min, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineTotalUASsThreshold
1.3.6.1.4.1.351.150.3.1.2.1.1.9
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the Unavailable Seconds(UAS) threshold for the 24 hour interval above which alarm is generated. This threshold is the same for Far End and Near End.
cwsLineStatAlarmStatus
1.3.6.1.4.1.351.150.3.1.2.1.1.10
Unsigned32
This variable indicates the status of the sonet line.
This object is updated every 15-minutes. Once the current 15-min window has passed, and there are no errors in the current 15-min window, the object is cleared from the lower level sonet task. The cwsLineStatAlarmStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. If none of the bits are set, it indicates no defect. The various bit-positions are:
1 sonetLineTotalESs
2 sonetLineTotalSESs
3 sonetLineTotalCVs
4 sonetLineTotalUASs
5 sonetLineCurrentESs
6 sonetLineCurrentSESs
7 sonetLineCurrentCVs
8 sonetLineCurrentUASs
9 sonetFarEndLineTotalESs
10 sonetFarEndLineTotalSESs 11 sonetFarEndLineTotalCVs 12 sonetFarEndLineTotalUASs 13 sonetFarEndLineCurrentESs 14 sonetFarEndLineCurrentSESs 15 sonetFarEndLineCurrentCVs 16 sonetFarEndLineCurrentUASs
cwsLineCurrent24HrTable
1.3.6.1.4.1.351.150.3.1.2.2
Index: ifIndex
Contains sonet line related current 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsLineCurrent24HrTable table get reset to 0.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsLineCurrent24HrESs
1.3.6.1.4.1.351.150.3.1.2.2.1.1
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of errored seconds encountered in current 24 hour interval.
cwsLineCurrent24HrSESs
1.3.6.1.4.1.351.150.3.1.2.2.1.2
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of SESs encountered in current 24 hour interval.
cwsLineCurrent24HrCVs
1.3.6.1.4.1.351.150.3.1.2.2.1.3
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of CVs encountered in current 24 hour interval.
cwsLineCurrent24HrUASs
1.3.6.1.4.1.351.150.3.1.2.2.1.4
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · Unavailable seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of UASs encountered in current 24 hour interval.
cwsFELineCurrent24HrESs
1.3.6.1.4.1.351.150.3.1.2.2.1.5
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end errored seconds encountered in current 24 hour interval.
cwsFELineCurrent24HrSESs
1.3.6.1.4.1.351.150.3.1.2.2.1.6
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end SESs encountered in current 24 hour interval.
cwsFELineCurrent24HrCVs
1.3.6.1.4.1.351.150.3.1.2.2.1.7
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end CVs encountered in current 24 hour interval.
cwsFELineCurrent24HrUASs
1.3.6.1.4.1.351.150.3.1.2.2.1.8
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · Unavailable seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end UASs encountered in current 24 hour interval.
cwsLinePrevious24HrTable
1.3.6.1.4.1.351.150.3.1.2.3
Index: ifIndex
Contains sonet line previous 24 hour counters. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsLinePrevious24HrTable table get reset to 0.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsLinePrevious24HrESs
1.3.6.1.4.1.351.150.3.1.2.3.1.1
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of errored seconds encountered in previous 24 hour interval.
cwsLinePrevious24HrSESs
1.3.6.1.4.1.351.150.3.1.2.3.1.2
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of SESs encountered in previous 24 hour interval.
cwsLinePrevious24HrCVs
1.3.6.1.4.1.351.150.3.1.2.3.1.3
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of CVs encountered in previous 24 hour interval.
cwsLinePrevious24HrUASs
1.3.6.1.4.1.351.150.3.1.2.3.1.4
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · Unavailable seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of UASs encountered in previous 24 hour interval.
cwsFELinePrevious24HrESs
1.3.6.1.4.1.351.150.3.1.2.3.1.5
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end errored seconds encountered in previous 24 hour interval.
cwsFELinePrevious24HrSESs
1.3.6.1.4.1.351.150.3.1.2.3.1.6
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end SESs encountered in previous 24 hour interval.
cwsFELinePrevious24HrCVs
1.3.6.1.4.1.351.150.3.1.2.3.1.7
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5,GR-253-CORE
Number of far end CVs encountered in previous 24 hour interval.
cwsFELinePrevious24HrUASs
1.3.6.1.4.1.351.150.3.1.2.3.1.8
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · Unavailable seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end UASs encountered in previous 24 hour interval.
cwsPathAlarmTable
1.3.6.1.4.1.351.150.3.1.3.1
Index: ifIndex
The SONET/SDH Path Alarm table. This table contains objects for thresholds which a user can set. When any threshold is exceeded, an alarm is set.
Changing any threshold will affect both the Near End and
Far End(remote end of the line) threshold.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsPathStatisticalAlarmSeverity
1.3.6.1.4.1.351.150.3.1.3.1.1.1
INTEGER1 = minor2 = major3 = none · Integer32
By setting this object to major or minor, a minor or major severity alarm is raised when any statistical threshold is exceeded. By default TCA crossing does not raise any alarm.
cwsPathCurrentESsThreshold
1.3.6.1.4.1.351.150.3.1.3.1.1.2
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for errored seconds(ES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End (remote end of the line) and Near End(this end of the line).
cwsPathTotalESsThreshold
1.3.6.1.4.1.351.150.3.1.3.1.1.3
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for errored seconds(ES) for the 24-hour interval, above which alarm is generated. This threshold is the same for Far End (remote end of the line) and Near End(this end of the line).
cwsPathCurrentSESsThreshold
1.3.6.1.4.1.351.150.3.1.3.1.1.4
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for severely errored seconds(SES) for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathTotalSESsThreshold
1.3.6.1.4.1.351.150.3.1.3.1.1.5
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This object indicates the threshold for severely errored seconds(SES) for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathCurrentCVsThreshold
1.3.6.1.4.1.351.150.3.1.3.1.1.6
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the coding violations threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathTotalCVsThreshold
1.3.6.1.4.1.351.150.3.1.3.1.1.7
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the coding violations threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathCurrentUASsThreshold
1.3.6.1.4.1.351.150.3.1.3.1.1.8
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the unavailable seconds threshold for the current 15-min interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathTotalUASsThreshold
1.3.6.1.4.1.351.150.3.1.3.1.1.9
Unsigned32 (0..2147483647)
Reference: RFC2558 Section 3.5, GR-253-CORE
This is the unavailable seconds threshold for the 24 hour interval, above which alarm is generated. This threshold is the same for Far End and Near End.
cwsPathStatAlarmStatus
1.3.6.1.4.1.351.150.3.1.3.1.1.10
Unsigned32
This variable indicates the status of the interface. The cwsPathStatAlarmStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. If none of the bits are set, it indicates no defect. The following ar the bit positions:
1 sonetPathTotalESs
2 sonetPathTotalSESs
3 sonetPathTotalCVs
4 sonetPathTotalUASs
5 sonetPathCurrentESs
6 sonetPathCurrentSESs
7 sonetPathCurrentCVs
8 sonetPathCurrentUASs
9 sonetFarEndPathTotalESs
10 sonetFarEndPathTotalSESs
11 sonetFarEndPathTotalCVs
12 sonetFarEndPathTotalUASs
13 sonetFarEndPathCurrentESs
14 sonetFarEndPathCurrentSESs
15 sonetFarEndPathCurrentCVs
16 sonetFarEndPathCurrentUASs
cwsPathCurrent24HrTable
1.3.6.1.4.1.351.150.3.1.3.2
Index: ifIndex
Contains sonet path related current 24 hour interval counter. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsPathCurrent24HrTable table get reset to 0.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsPathCurrent24HrESs
1.3.6.1.4.1.351.150.3.1.3.2.1.1
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of errored seconds encountered in current 24 hour interval.
cwsPathCurrent24HrSESs
1.3.6.1.4.1.351.150.3.1.3.2.1.2
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5,GR-253-CORE
Number of SESs encountered in current 24 hour interval.
cwsPathCurrent24HrCVs
1.3.6.1.4.1.351.150.3.1.3.2.1.3
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of CVs encountered in current 24 hour interval.
cwsPathCurrent24HrUASs
1.3.6.1.4.1.351.150.3.1.3.2.1.4
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · Unavailable seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of UASs encountered in current 24 hour interval.
cwsFEPathCurrent24HrESs
1.3.6.1.4.1.351.150.3.1.3.2.1.5
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end errored seconds encountered in current 24 hour interval.
cwsFEPathCurrent24HrSESs
1.3.6.1.4.1.351.150.3.1.3.2.1.6
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end SESs encountered in current 24 hour interval.
cwsFEPathCurrent24HrCVs
1.3.6.1.4.1.351.150.3.1.3.2.1.7
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end CVs encountered in current 24 hour interval.
cwsFEPathCurrent24HrUASs
1.3.6.1.4.1.351.150.3.1.3.2.1.8
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · Unavailable seconds
Reference: RFC2558 Section 3.5,GR-253-CORE
Number of far end UASs encountered in current 24 hour interval.
cwsPathPrevious24HrTable
1.3.6.1.4.1.351.150.3.1.3.3
Index: ifIndex
Contains sonet path previous 24 hour interval counter. A 24 hour interval starts at twelve midnight with reference to node time. In case of a manual change in node time all the counters in cwsPathPrevious24HrTable table get reset to 0.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
cwsPathPrevious24HrESs
1.3.6.1.4.1.351.150.3.1.3.3.1.1
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of errored seconds encountered in current 24 hour interval.
cwsPathPrevious24HrSESs
1.3.6.1.4.1.351.150.3.1.3.3.1.2
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of SESs encountered in current 24 hour interval.
cwsPathPrevious24HrCVs
1.3.6.1.4.1.351.150.3.1.3.3.1.3
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of CVs encountered in current 24 hour interval.
cwsPathPrevious24HrUASs
1.3.6.1.4.1.351.150.3.1.3.3.1.4
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · Unavailable seconds
Reference: RFC2558 Section 3.5,GR-253-CORE
Number of UASs encountered in current 24 hour interval.
cwsFEPathPrevious24HrESs
1.3.6.1.4.1.351.150.3.1.3.3.1.5
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32
Reference: RFC2558 Section 3.5,GR-253-CORE
Number of far end errored seconds encountered in previous 24 hour interval.
cwsFEPathPrevious24HrSESs
1.3.6.1.4.1.351.150.3.1.3.3.1.6
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · severely errored seconds
Reference: RFC2558 Section 3.5,GR-253-CORE
Number of far end SESs encountered in previous 24 hour interval.
cwsFEPathPrevious24HrCVs
1.3.6.1.4.1.351.150.3.1.3.3.1.7
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · coding violations
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end CVs encountered in previous 24 hour interval.
cwsFEPathPrevious24HrUASs
1.3.6.1.4.1.351.150.3.1.3.3.1.8
PerfIntervalCountA counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted. · Gauge32 · Unavailable seconds
Reference: RFC2558 Section 3.5, GR-253-CORE
Number of far end UASs encountered in previous 24 hour interval.