This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface link metrics specification.
Glossary
The following terms are used in the MIB definitions below.
Radio Interface: The interface that provides wireless communication
features.
Radio Link: The bi-directional wireless link between two
communicating wireless radios.
Radio PHY: Represents the transmission characteristics of the
Radio link.
Link Admin Up: This is the system time when the link is configured
to be 'administratively up'. The user can configure the link to be up either by executing a 'no shut' command via the CLI or by setting the ifAdminStatus object in the IF-MIB to 'up(1)' via SNMP.
Cisco Wireless MIB Organization
The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is divided into 2 main groups.
Head End: These objects are supported on the Head End only.
Subscriber Unit: These objects are supported on the Subscriber unit only.
This table contains the precision and scale values to be used when interpreting fixed point values in this MIB. This information is encapsulated in a table to accomodate for multiple cards in the same system having different precision values. This table is indexed by the ifIndex for the physical card (propDocsWirelessMaclayer). The user can refer to the entAliasMappingTable in the ENTITY-MIB to determine the upstream/downstream channels associated with each card.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
This variable indicates the exponent to apply to the fixed-point values.
p2mpLinkMetricsPrecision
1.3.6.1.4.1.9.9.181.1.1.1.2
CwrFixedPointPrecisionWhen in the range 1 to 9, CwrFixedPointPrecision is the number of decimal places in the fractional part of a fixed-point number.
CwrFixedPointPrecision is 0 for non-fixed-point numbers. (0..9) · Integer32
This variable indicates the number of decimal places used for precision when interpreting the fixed-point values.
p2mpSuLinkMetricsThreshTable
1.3.6.1.4.1.9.9.181.2.1
Index: ifIndex
This table contains threshold values that are the trigger points for controlling the collection of the Link Metrics such as Codeword Errored Seconds and others.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpSuLinkESThresh
1.3.6.1.4.1.9.9.181.2.1.1.1
Unsigned32
When the number of Codeword Errors detected in a single Operational second is greater than this value, that
second is counted as an Errored Second.
p2mpSuLinkDSThresh
1.3.6.1.4.1.9.9.181.2.1.1.2
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
When the percentage of codeword errors detected to the total codewords received in one second is equal to or greater than this value, and less than p2mpLinkSESThresh, the second is counted as a Codeword Degraded Second.
p2mpSuLinkSESThresh
1.3.6.1.4.1.9.9.181.2.1.1.3
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
When the percentage of codeword errors detected to the total codewords received in one second equals or exceeds this value, that second is counted as a Severely Errored Second.
p2mpSuLinkCSESThresh
1.3.6.1.4.1.9.9.181.2.1.1.4
Unsigned32
When the number of severely errored codewords detected consecutively in one second equals or exceeds this value, the second is counted as a Consecutively Severely Errored Second.
p2mpSuLink1HrESAlarmThresh
1.3.6.1.4.1.9.9.181.2.1.1.5
Unsigned32
This object specifies the one hour Codeword Error Second threshold. When the number of Codeword Error Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuErrSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
p2mpSuLink1HrSESAlarmThresh
1.3.6.1.4.1.9.9.181.2.1.1.6
Unsigned32
This object specifies the one hour Codeword Severely
Errored Seconds threshold. When the number of Codeword
Severely Errored Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuSevErrSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
p2mpSuLink1HrCSESAlarmThresh
1.3.6.1.4.1.9.9.181.2.1.1.7
Unsigned32
This object specifies the one hour Codeword Consecutively Severely Errored Seconds threshold. When the number of Codeword Severely Errored Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuConsecSevErrSecAlarmTrap trap will be generated.
Time measurement starts after the first operational
second.
p2mpSuLink1HrDCSAlarmThresh
1.3.6.1.4.1.9.9.181.2.1.1.8
Unsigned32
This object specifies the one hour Degraded Codeword Seconds threshold. When the number of Degraded Codeword Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuDegradedSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
p2mpSu1SecMetricsTable
1.3.6.1.4.1.9.9.181.2.2
Index: ifIndex · p2mpSu1SecIndex
This table contains metrics collected over the duration of one second.
This table will have a maximum of 60 entries providing cumulative status of the link, identified by ifIndex of propDocsWirelessDownstream, over the past one minute.
This table is updated once every second. After 60 seconds, only the latest 60 entries will be stored in the table.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpSu1SecIndex
1.3.6.1.4.1.9.9.181.2.2.1.1
Integer32 (1..60)
This object, along with ifIndex, identifies exactly one entry in the table.
p2mpSu1SecUpdateTime
1.3.6.1.4.1.9.9.181.2.2.1.2
CwrUpdateTimeThis is used to report statistics values measured on the wireless link with a 1 second granularity insted of timeTicks. (0..2147483647) · Integer32 · seconds
This object represents time in seconds since system power up at which time this entry was last updated.
This object identifies the nature of the measured second.
p2mpSu1SecTotalCodewords
1.3.6.1.4.1.9.9.181.2.2.1.4
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total number of codewords received by this radio link from the last Link Admin Up time until the current operational second.
p2mpSu1SecTotalErrCodewords
1.3.6.1.4.1.9.9.181.2.2.1.5
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total number of errored codewords received by this radio link from the last Link Admin Up time until the current operational second.
p2mpSu1SecValidDataPkt
1.3.6.1.4.1.9.9.181.2.2.1.6
Counter32
This variable indicates the number of data packets received without any bit errors from the last Link Admin Up time until the current operational second.
p2mpSu1MinMetricsTable
1.3.6.1.4.1.9.9.181.2.3
Index: ifIndex · p2mpSu1MinIndex
This table contains metrics collected over the duration of one minute.
This table will have a maximum of 60 entries providing cumulative statistics of the link, identified by ifIndex of propDocsWirelessDownstream, over the past one hour.
This table is updated once every minute.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpSu1MinIndex
1.3.6.1.4.1.9.9.181.2.3.1.1
Integer32 (1..60)
This object, along with ifIndex, identifies exactly one entry in the table.
p2mpSu1MinUpdateTime
1.3.6.1.4.1.9.9.181.2.3.1.2
CwrUpdateTimeThis is used to report statistics values measured on the wireless link with a 1 second granularity insted of timeTicks. (0..2147483647) · Integer32 · seconds
This object represents time in seconds since system power up until the time this entry was last updated.
p2mpSu1MinTotalCodewords
1.3.6.1.4.1.9.9.181.2.3.1.3
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the cumulative sum of received codewords from the last Link Admin Up time until the current operational second.
p2mpSu1MinTotalErrCodewords
1.3.6.1.4.1.9.9.181.2.3.1.4
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the cumulative sum of received errored codewords from the last Link Admin Up time until the current operational second.
p2mpSu1MinValidDataPkt
1.3.6.1.4.1.9.9.181.2.3.1.5
Counter32
This variable indicates the number of data packets received without any bit errors from the last Link Admin Up time until the current operational second.
p2mpSu1MinErrorFreeSeconds
1.3.6.1.4.1.9.9.181.2.3.1.6
CwrCwErrorFreeSecondA Codeword Error Free Second (EFS) is defined as 1 second when the radio link was synchronized and no codeword errors detected on the link. · Gauge32
This object represents the cumulative Codeword Error Free Seconds (EFS) detected from the last Link Admin Up time until the current operational second.
p2mpSu1MinErroredSeconds
1.3.6.1.4.1.9.9.181.2.3.1.7
CwrCwErroredSecondA Codeword Errored Second (ES) is defined as 1 second when the radio link was synchronized and 1 or more codeword errors were detected on the link. · Gauge32
This object represents the cumulative Codeword Errored Seconds (ES) detected from the last Link Admin Up time until the current operational second.
p2mpSu1MinDegradedSeconds
1.3.6.1.4.1.9.9.181.2.3.1.8
CwrCwDegradedSecondA Codeword Degraded Second (DS) is defined as a 1 second interval during which the CER was between cwrLinkLowCwErrThresh and cwrLinkHighCwErrThresh. · Gauge32
This object represents the cumulative Codeword Degraded Seconds (DS) detected from the last Link Admin Up time until the current operational second.
p2mpSu1MinSevErroredSeconds
1.3.6.1.4.1.9.9.181.2.3.1.9
CwrCwSeverelyErroredSecondA Codeword Severely Errored Second (SES) is defined as 1 second when the radio link was synchronized and the codeword error rate (CER) was greater than the threshold specified by cwrLinkHighCwErrThresh. · Gauge32
This object represents the cumulative Codeword Severely Errored Seconds (SES) detected from the last Link Admin Up time until the current operational second.
p2mpSu1MinConsecSevErrSeconds
1.3.6.1.4.1.9.9.181.2.3.1.10
CwrCwConsecutiveSevErrSecondA Codeword Consecutively Severely Errored Seconds (CSES) is defined as the metric that measures the number of times a sequence of Codeword Severely Errored Seconds(SES) crosses the cwrLinkCSESThresh value. It is independent of the length of the SES sequence. In other words this counter is incremented by one and only one for every such occurrence. · Gauge32
This object represents the cumulative Codeword Consecutively Severely Errored Seconds (CSES) detected from the last Link Admin Up time until the current operational second.
p2mpSu1MinSyncLossSeconds
1.3.6.1.4.1.9.9.181.2.3.1.11
Counter32
This object represents the cumulative number of seconds from the last Link Admin Up time to the current operational minute the link was out of synchronization.
p2mpSu1MinTxPowerMax
1.3.6.1.4.1.9.9.181.2.3.1.12
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable represents the maximum transmit power of the subscriber unit measured during the current operational minute. This is not a cumulative value.
p2mpSu1MinTxPowerMin
1.3.6.1.4.1.9.9.181.2.3.1.13
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the minimum transmit power of the subscriber unit measured during the current operational minute. This is not a cumulative value.
p2mpSu1MinTxPowerAvg
1.3.6.1.4.1.9.9.181.2.3.1.14
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the average measured transmit power of the subscriber unit measured during the current operational minute. This is not a cumulative value.
p2mpSu1MinMainAntRxPowerMax
1.3.6.1.4.1.9.9.181.2.3.1.15
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the maximum receive power measured at the main antenna during the current operational minute. This is not a cumulative value.
p2mpSu1MinMainAntRxPowerMin
1.3.6.1.4.1.9.9.181.2.3.1.16
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the minimum receive power measured at the main antenna during the current operational minute. This is not a cumulative value.
p2mpSu1MinMainAntRxPowerAvg
1.3.6.1.4.1.9.9.181.2.3.1.17
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the average receive power measured at the main antenna during the current operational minute. This is not a cumulative value.
p2mpSu1MinDivAntRxPowerMax
1.3.6.1.4.1.9.9.181.2.3.1.18
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the maximum receive power measured at the diversity antenna during the current operational minute. This is not a cumulative value.
p2mpSu1MinDivAntRxPowerMin
1.3.6.1.4.1.9.9.181.2.3.1.19
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the minimum receive power measured at the diversity antenna during the current operational minute. This is not a cumulative value.
p2mpSu1MinDivAntRxPowerAvg
1.3.6.1.4.1.9.9.181.2.3.1.20
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the average received power measured at the diversity antenna during the current operational minute. This is not a cumulative value.
p2mpSu1HrMetricsTable
1.3.6.1.4.1.9.9.181.2.4
Index: ifIndex · p2mpSu1HrIndex
This table contains metrics collected over the duration of one hour.
This table will have a maximum of 24 entries providing cumulative status of the link, identified by ifIndex, over the past 24 hours.
This table is updated once every hour.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpSu1HrIndex
1.3.6.1.4.1.9.9.181.2.4.1.1
Integer32 (1..24)
This object, along with ifIndex, identifies exactly one entry in the table.
p2mpSu1HrUpdateTime
1.3.6.1.4.1.9.9.181.2.4.1.2
CwrUpdateTimeThis is used to report statistics values measured on the wireless link with a 1 second granularity insted of timeTicks. (0..2147483647) · Integer32 · seconds
This object represents time in seconds since system power up at which time this entry was last updated.
p2mpSu1HrTotalCodewords
1.3.6.1.4.1.9.9.181.2.4.1.3
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total received codewords detected from the last Link Admin Up time until the current operational hour.
p2mpSu1HrTotalErrCodewords
1.3.6.1.4.1.9.9.181.2.4.1.4
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total number of errored codewords received from the last Link Admin Up time until the current operational hour.
p2mpSu1HrValidDataPkt
1.3.6.1.4.1.9.9.181.2.4.1.5
Counter32
This variable indicates the number of data packets received without any bit errors from the last Link Admin Up time until the current operational hour.
p2mpSu1HrErrorFreeSeconds
1.3.6.1.4.1.9.9.181.2.4.1.6
CwrCwErrorFreeSecondA Codeword Error Free Second (EFS) is defined as 1 second when the radio link was synchronized and no codeword errors detected on the link. · Gauge32
This object represents the cumulative Codeword Error Free Seconds (EFS) detected from the last Link Admin Up time until the current operational hour.
p2mpSu1HrErroredSeconds
1.3.6.1.4.1.9.9.181.2.4.1.7
CwrCwErroredSecondA Codeword Errored Second (ES) is defined as 1 second when the radio link was synchronized and 1 or more codeword errors were detected on the link. · Gauge32
This object represents the cumulative Codeword Errored Seconds (ES) detected from the last Link Admin Up time until the current operational hour
p2mpSu1HrSevErroredSeconds
1.3.6.1.4.1.9.9.181.2.4.1.8
CwrCwSeverelyErroredSecondA Codeword Severely Errored Second (SES) is defined as 1 second when the radio link was synchronized and the codeword error rate (CER) was greater than the threshold specified by cwrLinkHighCwErrThresh. · Gauge32
This object represents the cumulative Codeword Severely Errored Seconds (SES) detected from the last Link Admin Up time until the current operational hour
p2mpSu1HrConsecSvErrSeconds
1.3.6.1.4.1.9.9.181.2.4.1.9
CwrCwConsecutiveSevErrSecondA Codeword Consecutively Severely Errored Seconds (CSES) is defined as the metric that measures the number of times a sequence of Codeword Severely Errored Seconds(SES) crosses the cwrLinkCSESThresh value. It is independent of the length of the SES sequence. In other words this counter is incremented by one and only one for every such occurrence. · Gauge32
This object represents the cumulative Codeword Consecutive Severely Errored Seconds (CSES) detected from the last Link Admin Up time until the current operational hour
p2mpSu1HrSyncLossSeconds
1.3.6.1.4.1.9.9.181.2.4.1.10
Counter32
This object represents the cumulative number of seconds from the last Link Admin Up time to the current operational hour the link was out of synchronization.
p2mpSu1HrDegradedSeconds
1.3.6.1.4.1.9.9.181.2.4.1.11
CwrCwDegradedSecondA Codeword Degraded Second (DS) is defined as a 1 second interval during which the CER was between cwrLinkLowCwErrThresh and cwrLinkHighCwErrThresh. · Gauge32
This object represents the cumulative Codeword Degraded Seconds detected from the last Link Admin Up time until the current operational hour
p2mpSu1HrTxPowerMax
1.3.6.1.4.1.9.9.181.2.4.1.12
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the maximum transmit power measured during the current operational hour. This is not a cumulative value.
p2mpSu1HrTxPowerMin
1.3.6.1.4.1.9.9.181.2.4.1.13
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the minimum transmit power measured during the current operational hour. This is not a cumulative value.
p2mpSu1HrTxPowerAvg
1.3.6.1.4.1.9.9.181.2.4.1.14
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the average transmit power measured during the current operational hour. This is not a cumulative value.
p2mpSu1HrMainAntRxPowerMax
1.3.6.1.4.1.9.9.181.2.4.1.15
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the maximum receive power measured at the main antenna during the current operational hour. This is not a cumulative value.
p2mpSu1HrMainAntRxPowerMin
1.3.6.1.4.1.9.9.181.2.4.1.16
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the minimum receive power measured at the main antenna during the current operational hour. This is not a cumulative value.
p2mpSu1HrMainAntRxPowerAvg
1.3.6.1.4.1.9.9.181.2.4.1.17
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the average received power measured at the main antenna during the current operational hour. This is not a cumulative value.
p2mpSu1HrDivAntRxPowerMax
1.3.6.1.4.1.9.9.181.2.4.1.18
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the maximum receive power measured at the diversity antenna during the current operational hour. This is not a cumulative value.
p2mpSu1HrDivAntRxPowerMin
1.3.6.1.4.1.9.9.181.2.4.1.19
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the minimum receive power measured at the diversity antenna during the current operational hour. This is not a cumulative value.
p2mpSu1HrDivAntRxPowerAvg
1.3.6.1.4.1.9.9.181.2.4.1.20
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32 · dBm - decibel milliwatts
This variable indicates the average received power measured at the diversity antenna during the current operational hour. This is not a cumulative value.
p2mpSuCumulativeLinkMetricsTable
1.3.6.1.4.1.9.9.181.2.6
Index: ifIndex
This table contains metrics used to measure the quality of the radio link identified by the ifIndex. The metrics in this table are cumulated since the last Link Admin Up time.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpSuAvailableSeconds
1.3.6.1.4.1.9.9.181.2.6.1.1
Counter32
This object represents the total number of Available Seconds since the last Link Admin Up time. It is equal to: Error Free Seconds + Errored Seconds - Severely Errored Seconds
p2mpSuUnAvailableSeconds
1.3.6.1.4.1.9.9.181.2.6.1.2
Counter32
This object represents the total number of seconds since the last Link Admin Up time that the link was not available for use. It is equal to: Severely Errored Seconds + Sync Loss Seconds.
p2mpSuPctAvailSeconds
1.3.6.1.4.1.9.9.181.2.6.1.3
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
This object represents the ratio of cumulative Available seconds to Link Admin Up seconds, expressed as a percentage.
p2mpSuSyncLossSeconds
1.3.6.1.4.1.9.9.181.2.6.1.4
Counter32
This object represents the number of seconds since the last Link Admin Up time during which the radio link was out of sync with the remote end.
p2mpSuPctErrorFreeSeconds
1.3.6.1.4.1.9.9.181.2.6.1.5
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
This object represents the ratio of cumulative Codeword Error Free Seconds (EFS) to Link Admin Up seconds, expressed as a percentage.
p2mpSuPctErroredSeconds
1.3.6.1.4.1.9.9.181.2.6.1.6
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
This object represents the ratio of cumulative Codeword Errored Seconds (ES) to Link Admin Up seconds, expressed as a percentage.
p2mpSuPctSevErroredSeconds
1.3.6.1.4.1.9.9.181.2.6.1.7
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
This object represents the ratio of cumulative Codeword Severely Errored Seconds (SES) to Link Admin Up seconds, expressed as a percentage.
p2mpSuPctDegradedSeconds
1.3.6.1.4.1.9.9.181.2.6.1.8
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
This object represents the ratio of degraded seconds (DS) to Link Admin Up seconds, expressed as a percentage.
p2mpSuInitialSyncSeconds
1.3.6.1.4.1.9.9.181.2.6.1.9
Counter32
Time spent in acquiring sync for the first time after the link is administratively configured up
p2mpSuSyncSuccessCount
1.3.6.1.4.1.9.9.181.2.6.1.10
Counter32
This object represents the number of times the subscriber unit successfully synchronized with the head end.
p2mpSuLastSyncSuccessTime
1.3.6.1.4.1.9.9.181.2.6.1.11
TimeIntervalA period of time, measured in units of 0.01 seconds. (0..2147483647) · Integer32
This object represents elapsed time since the subscriber unit last successfully synchronized with the head end.
p2mpSuSyncFailureCount
1.3.6.1.4.1.9.9.181.2.6.1.12
Counter32
This object represents the number of times the subscriber unit attempted, but failed, to synchronize with the head end.
p2mpSuLastSyncFailTime
1.3.6.1.4.1.9.9.181.2.6.1.13
TimeIntervalA period of time, measured in units of 0.01 seconds. (0..2147483647) · Integer32
This object represents elapsed time since the subscriber unit last lost synchronization with the remote end.
p2mpSuSyncMedEffort
1.3.6.1.4.1.9.9.181.2.6.1.14
Counter32
This object indicates how many times sync was regained (since Link Admin Up time) without the subscriber unit having to scan through the channels.
p2mpSuSyncHighEffort
1.3.6.1.4.1.9.9.181.2.6.1.15
Counter32
This object indicates how many times the channels were scanned due to sync loss (after first sync at Link Admin Up time).
p2mpSuEffectiveDataRate
1.3.6.1.4.1.9.9.181.2.6.1.16
Gauge32
Represents the effective data throughput while the link was last synchronized. For a given bandwidth and throughput selection, it represents the data throughput being achieved.
p2mpSuPercentEfficiency
1.3.6.1.4.1.9.9.181.2.6.1.17
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
Represents the ratio of total good codewords received to the total number of codewords received since Link Admin Up, stated as a percentage
p2mpHeLinkMetricsThreshTable
1.3.6.1.4.1.9.9.181.3.1
Index: ifIndex
This table contains thresholds that are the trigger points to determine if an excessive number of errored codewords are being transmitted.
The thresholds can be set for each upstream channel. This helps determine if a particular upstream channel is experiencing excessive errors.
The thresholds can also be set for all the subscriber units communicating with the head end. These thresholds will not be set on a per subscriber basis. Instead, there is only one entry in this table for all the subscriber units.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpHe1HrMinTotalCWThresh
1.3.6.1.4.1.9.9.181.3.1.1.1
Unsigned32
This object specifies the threshold for the minimum number of total codewords that should be transmitted in an operational hour before the percentage of errored codewords is evaluated against the p2mpHe1HrPctErrCWThresh.
p2mpHe1HrPctErrCWThresh
1.3.6.1.4.1.9.9.181.3.1.1.2
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
This object represents the threshold for the acceptable ratio of errored codewords to the total codewords transmitted in an operational hour.
For an Upstream Channel: When the percentage of errored codewords to total codewords transmitted on a upstream channel crosses this threshold, the p2mpHeChPctErrCWThreshTrap is sent out (provided the number of total codewords transmitted on the upstream channel in an operational hour, exceeds the value represented by p2mpHe1HrMinTotalCWThresh).
For a Subscriber Unit (SU): When the percentage of errored codewords to total codewords transmitted by a SU crosses this threshold, the SU is added to a list of SU's that have also crossed this threshold (provided the number of total codewords transmitted by the SU exceed the value represented by p2mpHe1HrMinTotalCWThresh). The head end sends out the p2mpHeMacPctErrCWThreshTrap to indicate that an SU has been added to the 'bad SU list'.
p2mpHeBadSuTable
1.3.6.1.4.1.9.9.181.3.2
Index: ifIndex · p2mpBadSuIndex
This table lists all the subscriber units who have either failed to transmit a minimum number of codewords in an operational hour OR have transmitted a total number of codewords equal to or greater than p2mpHe1HrMinTotalCWThresh but have a codeword error percentage (ratio of errored codewords to the total number of codewords transmitted) greater than p2mpHe1HrPctErrCWThresh.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpBadSuIndex
1.3.6.1.4.1.9.9.181.3.2.1.1
Integer32 (1..2147483647)
This object, along with the ifIndex of the MAC layer, identifies exactly one entry in the table.
p2mpBadSuUpdateTime
1.3.6.1.4.1.9.9.181.3.2.1.2
CwrUpdateTimeThis is used to report statistics values measured on the wireless link with a 1 second granularity insted of timeTicks. (0..2147483647) · Integer32 · seconds
This object represents time in seconds since system power up at which time this entry was last updated.
p2mpBadSuMacAddress
1.3.6.1.4.1.9.9.181.3.2.1.3
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object identifies the subscriber unit that either failed to transmit a minimum number of codewords in an operational hour OR whose percentage of errored codewords transmitted exceeded the threshold.
p2mpTotalErroredCodewords
1.3.6.1.4.1.9.9.181.3.2.1.4
Unsigned32
This object represents the total errored codewords transmitted by this subscriber unit in the current operational hour.
p2mpPctErroredCodewords
1.3.6.1.4.1.9.9.181.3.2.1.5
Unsigned32
This object represent the percentage of errored codewords to total codewords transmitted by the subscriber unit in the current operational hour.
This table contains codeword error history for the past 24 hours, at 1 hour intervals, on a per subscriber basis.
This table will have a maximum of 24 entries providing cumulative status of the link, identified by ifIndex, over the past 24 hours.
This table is updated once every hour.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpSuMacAddress
1.3.6.1.4.1.9.9.181.3.3.1.1
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object is used to index this table. It indicates the MAC address of the subscriber unit.
p2mpHeCWErrorIndex
1.3.6.1.4.1.9.9.181.3.3.1.2
Integer32 (1..24)
This object identifies exactly one entry in the table.
p2mpHeCWErrorUpdateTime
1.3.6.1.4.1.9.9.181.3.3.1.3
CwrUpdateTimeThis is used to report statistics values measured on the wireless link with a 1 second granularity insted of timeTicks. (0..2147483647) · Integer32 · seconds
This object represents time in seconds since system power up at which time this entry was last updated.
p2mpTotalCodewords
1.3.6.1.4.1.9.9.181.3.3.1.4
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total received codewords detected on the subscriber unit identified by p2mpSuMacAddress from Link Admin Up time until the current operational hour.
p2mpErroredCodewords
1.3.6.1.4.1.9.9.181.3.3.1.5
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total received errored codewords detected on the subscriber unit identified by p2mpSuMacAddress from Link Admin Up time until the current operational hour.
p2mpSINR
1.3.6.1.4.1.9.9.181.3.3.1.6
CwrFixedPointValueThis represents a fixed point number. Use values -2147483648 and +2147483647 to indicate underflow and overflow respectively. Use CwrFixedPointPrecision to indicate how many fractional digits the CwrFixedPointValue has. · Integer32
This object represents the ratio of signal to (interference + noise) from Link Admin Up time until the current operational hour.
p2mpHe1SecMetricsTable
1.3.6.1.4.1.9.9.181.3.4
Index: ifIndex · p2mpHe1SecIndex
This table contains metrics collected over the duration of one second.
This table will have a maximum of 60 entries providing cumulative status of the upstream channel, identified by ifIndex of propDocsWirelessUpstream, over the past one minute.
This table is updated once every second.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpHe1SecIndex
1.3.6.1.4.1.9.9.181.3.4.1.1
Integer32 (1..60)
This object, along with ifIndex, identifies exactly one entry in the table.
p2mpHe1SecUpdateTime
1.3.6.1.4.1.9.9.181.3.4.1.2
CwrUpdateTimeThis is used to report statistics values measured on the wireless link with a 1 second granularity insted of timeTicks. (0..2147483647) · Integer32 · seconds
This object represents time in seconds since system power up at which time this entry was last updated.
p2mpHe1SecTotalCodewords
1.3.6.1.4.1.9.9.181.3.4.1.3
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total number of codewords received on a channel from the last Link Admin Up time until the current operational second.
p2mpHe1SecErroredCodewords
1.3.6.1.4.1.9.9.181.3.4.1.4
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total number of errored codewords received on a channel from the last Link Admin Up time until the current operational second.
p2mpHe1MinMetricsTable
1.3.6.1.4.1.9.9.181.3.5
Index: ifIndex · p2mpHe1MinIndex
This table contains metrics collected over the duration of one minute.
This table will have a maximum of 60 entries providing cumulative status of the upstream channel, identified by ifIndex of propDocsWirelessUpstream, over the past one hour.
This table is updated once every minute.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpHe1MinIndex
1.3.6.1.4.1.9.9.181.3.5.1.1
Integer32 (1..60)
This object, along with ifIndex, identifies exactly one entry in the table.
p2mpHe1MinUpdateTime
1.3.6.1.4.1.9.9.181.3.5.1.2
CwrUpdateTimeThis is used to report statistics values measured on the wireless link with a 1 second granularity insted of timeTicks. (0..2147483647) · Integer32 · seconds
This object represents time in seconds since system power up at which time this entry was last updated.
p2mpHe1MinTotalCodewords
1.3.6.1.4.1.9.9.181.3.5.1.3
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the cumulative sum of codewords received on a channel from the last Link Admin Up time until the current operational minute.
p2mpHe1MinErroredCodewords
1.3.6.1.4.1.9.9.181.3.5.1.4
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the cumulative sum of errored codewords received on a channel from the last Link Admin Up time until the current operational minute.
p2mpHe1HrMetricsTable
1.3.6.1.4.1.9.9.181.3.6
Index: ifIndex · p2mpHe1HrIndex
This table contains metrics collected over the duration of one hour.
This table will have a maximum of 24 entries providing cumulative status of the upstream channel, identified by ifIndex of propDocsWirelessUpstream, over the past 24 hours.
This table is updated once every hour.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
p2mpHe1HrIndex
1.3.6.1.4.1.9.9.181.3.6.1.1
Integer32 (1..24)
This object, along with ifIndex, identifies exactly one entry in the table.
p2mpHe1HrUpdateTime
1.3.6.1.4.1.9.9.181.3.6.1.2
CwrUpdateTimeThis is used to report statistics values measured on the wireless link with a 1 second granularity insted of timeTicks. (0..2147483647) · Integer32 · seconds
This object represents time in seconds since system power up at which time this entry was last updated.
p2mpHe1HrTotalCodewords
1.3.6.1.4.1.9.9.181.3.6.1.3
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total number of codewords received on this channel at the time this entry was updated.
p2mpHe1HrErroredCodewords
1.3.6.1.4.1.9.9.181.3.6.1.4
WirelessGauge64This is a temporary textual convention that will be deleted from this MIB when all references to this TC have been changed to use 'CounterBasedGauge64' defined in RFC 2856 (0..18446744073709551615) · Counter64
This object represents the total number of errored codewords received on this channel in the last 1 hour.
Trap details
p2mpHeChPctErrCWThreshTrap
1.3.6.1.4.1.9.9.181.1.2.0.1
The p2mpHe1HrPctErrCWThresh for an upstream channel was exceeded.
p2mpHe1HrPctErrCWThresh
1.3.6.1.4.1.9.9.181.3.1.1.2
CwrPercentageValueThis object can be used to represent percentage values for codeword errors, available seconds, etc. The UNITS clause associated with each object will indicate the degree of precison. (0..10000000) · Gauge32 · 0.00001 percent
This object represents the threshold for the acceptable ratio of errored codewords to the total codewords transmitted in an operational hour.
For an Upstream Channel: When the percentage of errored codewords to total codewords transmitted on a upstream channel crosses this threshold, the p2mpHeChPctErrCWThreshTrap is sent out (provided the number of total codewords transmitted on the upstream channel in an operational hour, exceeds the value represented by p2mpHe1HrMinTotalCWThresh).
For a Subscriber Unit (SU): When the percentage of errored codewords to total codewords transmitted by a SU crosses this threshold, the SU is added to a list of SU's that have also crossed this threshold (provided the number of total codewords transmitted by the SU exceed the value represented by p2mpHe1HrMinTotalCWThresh). The head end sends out the p2mpHeMacPctErrCWThreshTrap to indicate that an SU has been added to the 'bad SU list'.
p2mpHeMacPctErrCWThreshTrap
1.3.6.1.4.1.9.9.181.1.2.0.2
The p2mpHe1HrPctErrCWThresh for the subscriber unit was exceeded. The subscriber unit was added to the p2mpHeBadSuTable.
p2mpBadSuMacAddress
1.3.6.1.4.1.9.9.181.3.2.1.3
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object identifies the subscriber unit that either failed to transmit a minimum number of codewords in an operational hour OR whose percentage of errored codewords transmitted exceeded the threshold.
p2mpTotalErroredCodewords
1.3.6.1.4.1.9.9.181.3.2.1.4
Unsigned32
This object represents the total errored codewords transmitted by this subscriber unit in the current operational hour.
p2mpPctErroredCodewords
1.3.6.1.4.1.9.9.181.3.2.1.5
Unsigned32
This object represent the percentage of errored codewords to total codewords transmitted by the subscriber unit in the current operational hour.
p2mpSuErrSecAlarmTrap
1.3.6.1.4.1.9.9.181.1.2.0.3
The p2mpSuLink1HrESAlarmThresh was exceeded.
p2mpSuLink1HrESAlarmThresh
1.3.6.1.4.1.9.9.181.2.1.1.5
Unsigned32
This object specifies the one hour Codeword Error Second threshold. When the number of Codeword Error Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuErrSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
p2mpSuSevErrSecAlarmTrap
1.3.6.1.4.1.9.9.181.1.2.0.4
The p2mpSuLink1HrSESAlarmThresh was exceeded.
p2mpSuLink1HrSESAlarmThresh
1.3.6.1.4.1.9.9.181.2.1.1.6
Unsigned32
This object specifies the one hour Codeword Severely
Errored Seconds threshold. When the number of Codeword
Severely Errored Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuSevErrSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
p2mpSuConsecSevErrSecAlarmTrap
1.3.6.1.4.1.9.9.181.1.2.0.5
The p2mpSuLink1HrCSESAlarmThresh was exceeded.
p2mpSuLink1HrCSESAlarmThresh
1.3.6.1.4.1.9.9.181.2.1.1.7
Unsigned32
This object specifies the one hour Codeword Consecutively Severely Errored Seconds threshold. When the number of Codeword Severely Errored Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuConsecSevErrSecAlarmTrap trap will be generated.
Time measurement starts after the first operational
second.
p2mpSuDegradedSecAlarmTrap
1.3.6.1.4.1.9.9.181.1.2.0.6
The p2mpSuLink1HrDCSAlarmThresh was exceeded.
p2mpSuLink1HrDCSAlarmThresh
1.3.6.1.4.1.9.9.181.2.1.1.8
Unsigned32
This object specifies the one hour Degraded Codeword Seconds threshold. When the number of Degraded Codeword Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuDegradedSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.