A table contains a list of information about test on the device's interfaces. Note that entries will exist in this table when the corresponding interface is capable to run test.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
esCableDiagIfAction
1.3.6.1.4.1.171.17.58.1.1.1.1
INTEGER1 = noOp2 = test3 = clear · Integer32
This object control the action to be executed on the interface.
noOp(1) - No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned.
test(2) - Start the test on the interface.
clear(3) - Clear all the test results on the interface. The value of the following objects of the entry will become 'other'. -- esCableDiagResultPair1Status -- esCableDiagResultPair2Status -- esCableDiagResultPair3Status -- esCableDiagResultPair4Status The value of the following objects of the entry will become -1 (unavailable) -- esCableDiagResultPair1Length -- esCableDiagResultPair2Length -- esCableDiagResultPair3Length -- esCableDiagResultPair4Length The value of esCableDiagResultStatus of the entry will become 'notRun'.
esCableDiagResultTable
1.3.6.1.4.1.171.17.58.1.2
Index: ifIndex
A table contains a list of interface's cable situation. Note that entries will exist in this table when the corresponding interface is a copper Ethernet port.
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
esCableDiagResultPair1Status
1.3.6.1.4.1.171.17.58.1.2.1.1
DlinkCableDiagStatus0 = other1 = ok2 = open3 = short4 = openOrShort5 = crosstalk6 = unKnown7 = noCable8 = shutdownThe status of a pair of the cable. other(0) - Other status is not specified here. E.g. the diagnostics has never been performed, or the previous result is cleared.
ok(1) - The pair or cable has no error.
open(2) - The cable in the error pair does not have a connection
at the specified position. short(3) - The cable in the error pair has a short problem at the specified position. openOrShort(4) - The PHY has no capability to distinguish between open and short state. crosstalk(5)- The cable in the error pair has a crosstalk problem at the specified position. unKnown(6) - The diagnostics got an unknown status. noCable(7) - The port does not have any cable connection to the remote partner. shutdown(8)- The remote partner is powered off. · Integer32
This object indicates the status of pair 1 of the cable.
esCableDiagResultPair2Status
1.3.6.1.4.1.171.17.58.1.2.1.2
DlinkCableDiagStatus0 = other1 = ok2 = open3 = short4 = openOrShort5 = crosstalk6 = unKnown7 = noCable8 = shutdownThe status of a pair of the cable. other(0) - Other status is not specified here. E.g. the diagnostics has never been performed, or the previous result is cleared.
ok(1) - The pair or cable has no error.
open(2) - The cable in the error pair does not have a connection
at the specified position. short(3) - The cable in the error pair has a short problem at the specified position. openOrShort(4) - The PHY has no capability to distinguish between open and short state. crosstalk(5)- The cable in the error pair has a crosstalk problem at the specified position. unKnown(6) - The diagnostics got an unknown status. noCable(7) - The port does not have any cable connection to the remote partner. shutdown(8)- The remote partner is powered off. · Integer32
This object indicates the status of pair 2 of the cable.
esCableDiagResultPair3Status
1.3.6.1.4.1.171.17.58.1.2.1.3
DlinkCableDiagStatus0 = other1 = ok2 = open3 = short4 = openOrShort5 = crosstalk6 = unKnown7 = noCable8 = shutdownThe status of a pair of the cable. other(0) - Other status is not specified here. E.g. the diagnostics has never been performed, or the previous result is cleared.
ok(1) - The pair or cable has no error.
open(2) - The cable in the error pair does not have a connection
at the specified position. short(3) - The cable in the error pair has a short problem at the specified position. openOrShort(4) - The PHY has no capability to distinguish between open and short state. crosstalk(5)- The cable in the error pair has a crosstalk problem at the specified position. unKnown(6) - The diagnostics got an unknown status. noCable(7) - The port does not have any cable connection to the remote partner. shutdown(8)- The remote partner is powered off. · Integer32
This object indicates the status of pair 3 of the cable.
esCableDiagResultPair4Status
1.3.6.1.4.1.171.17.58.1.2.1.4
DlinkCableDiagStatus0 = other1 = ok2 = open3 = short4 = openOrShort5 = crosstalk6 = unKnown7 = noCable8 = shutdownThe status of a pair of the cable. other(0) - Other status is not specified here. E.g. the diagnostics has never been performed, or the previous result is cleared.
ok(1) - The pair or cable has no error.
open(2) - The cable in the error pair does not have a connection
at the specified position. short(3) - The cable in the error pair has a short problem at the specified position. openOrShort(4) - The PHY has no capability to distinguish between open and short state. crosstalk(5)- The cable in the error pair has a crosstalk problem at the specified position. unKnown(6) - The diagnostics got an unknown status. noCable(7) - The port does not have any cable connection to the remote partner. shutdown(8)- The remote partner is powered off. · Integer32
This object indicates the status of pair 4 of the cable.
esCableDiagResultPair1Length
1.3.6.1.4.1.171.17.58.1.2.1.5
Integer32 · meters
This object indicates the approximate length or length to the failure of pair 1 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
esCableDiagResultPair2Length
1.3.6.1.4.1.171.17.58.1.2.1.6
Integer32 · meters
This object indicates the approximate length or length to the failure of pair 2 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
esCableDiagResultPair3Length
1.3.6.1.4.1.171.17.58.1.2.1.7
Integer32 · meters
This object indicates the approximate length or length to the failure of pair 3 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
esCableDiagResultPair4Length
1.3.6.1.4.1.171.17.58.1.2.1.8
Integer32 · meters
This object indicates the approximate length or length to the failure of pair 4 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
Indicates the status of cable diagnostics on the interface.
notRun(0) - the cable diagnostics has never been run for this interface or the previous result is cleared.
processing(1) - the cable diagnostics is currently running on the interface.
lastTestOk(2) - the last cable diagnostics was performed successfully on the interface.
lastTestFailed(3) - the last cable diagnostics failed on the interface.