esErrDisIfStatusTableNum
1.3.6.1.4.1.171.17.45.1.2
Unsigned32
Indicates the number of entries present in the esErrDisIfStatusTable.
DLINKES-ERROR-DISABLE-MIB
2013-07-08
Download DLINKES-ERROR-DISABLE-MIB.txt Open DLINKES-ERROR-DISABLE-MIB.txt in a new tab
This MIB module defines objects for error disabled.
SCALARS (6) · TABLES (2) · TRAPS (4)
Scalars (6)
Tables (2)
| Name | OID |
|---|---|
| esErrDisRecoveryTable | 1.3.6.1.4.1.171.17.45.1.1 |
| esErrDisIfStatusTable | 1.3.6.1.4.1.171.17.45.1.3 |
Traps (4)
END OF TOC
Scalar details
esErrDisNotificationEnable
1.3.6.1.4.1.171.17.45.1.4
BITS
This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. errDisableAsserted(0) - Controls the notifications for a port/vlan entering into error disabled state. errDisableCleared(1) - Controls the notifications for a port/vlan exiting from error disabled state.
esErrDisNotifRate
1.3.6.1.4.1.171.17.45.1.5
Unsigned32 (0..1000) · notifications per minute
Expressed in the number of notifications can be generated per minute. This object configures the rate-limit of SNMP Notification for errDisable feature. A value of 0 indicates that an SNMP Notification is generated for every error disabled event.
esErrDisNotifyInfoPortIfIndex
1.3.6.1.4.1.171.17.45.1.6.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the port number of error disabled port.
esErrDisNotifyInfoLoopDetectedVID
1.3.6.1.4.1.171.17.45.1.6.2
VlanIdThe VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.Reference: IEEE Std 802.1Q 2003 Edition, Virtual Bridged Local Area Networks. (1..4094) · Integer32 · hint d
This object indicates the VLAN ID that has detected a loopback.
esErrDisNotifyInfoReasonID
1.3.6.1.4.1.171.17.45.1.6.3
EsErrDisReasonID1 = loopbackDetect2 = l2ptGuard3 = psecureViolation4 = stormControl5 = bpduProtect6 = arpRateLimit7 = dhcpRateLimit8 = ddm9 = scheduledShutdown10 = scheduledHibernation11 = duldAn integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving duld:D-LINK Unidirectional Link Detection · Integer32
This object indicates the condition which cause a port/vlan enter into error disabled state.
Table details
esErrDisRecoveryTable
1.3.6.1.4.1.171.17.45.1.1
Index: esErrDisRecoveryIndex
This table contains the recovery mechanism for the features with error-disable functionality. Transceiver monitoring module (the EsErrDisReasonID is 'ddm') can also put a SFP port which is in abnormal status in error disabled state. This error disable cannot be auto recovered but can only be manually recovered. As a result, there is no entry for error cause is 'ddm' in this table.
esErrDisRecoveryIndex
1.3.6.1.4.1.171.17.45.1.1.1.1
EsErrDisReasonID1 = loopbackDetect2 = l2ptGuard3 = psecureViolation4 = stormControl5 = bpduProtect6 = arpRateLimit7 = dhcpRateLimit8 = ddm9 = scheduledShutdown10 = scheduledHibernation11 = duldAn integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving duld:D-LINK Unidirectional Link Detection · Integer32
This object indicates the cause of error-disable. An integer-value assigned to various conditions that can error disable a system entity. loopbackDetect(1) - The error-disable reason is Loopback Detection. l2ptGuard(2) - The error-disable reason is L2 Protocol Tunneling. psecureViolation(3) - The error-disable reason is Port Security violation. stormControl(4) - The error-disable reason is (broadcast/multicast/unicast)storm control. bpduProtect(5) - The error-disable reason is BPDU protected. arpRateLimit(6) - The error-disable reason is ARP rate limit. dhcpRateLimit(7) - The error-disable reason is DHCP rate limit. ddm(8) - The error-disable reason is Digital Diagnostics Monitoring. scheduledShutdown(9) - The error-disable reason is Scheduled Port-shutdown by Power Saving. scheduledHibernation(10)- The error-disable reason is Scheduled Hibernation by Power Saving. duld(11) - The error-disable reason is D-LINK Unidirectional Link Detection.
esErrDisRecoveryEnable
1.3.6.1.4.1.171.17.45.1.1.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object specifies whether the system can automatically recover a system entity that has been disabled by the cause.
esErrDisRecoveryInterval
1.3.6.1.4.1.171.17.45.1.1.1.3
Integer32 (5..86400) · seconds
Specifies the error-recovery time interval on specific cause to recover the port/interface from the error disabled situation.
esErrDisIfStatusTable
1.3.6.1.4.1.171.17.45.1.3
Index: esErrDisIfStatusIfIndex · esErrDisIfStatusVlanIndex · esErrDisIfStatusDisReasonIndex
This table provides next recovery timeout information about an interface disabled by a feature.
esErrDisIfStatusIfIndex
1.3.6.1.4.1.171.17.45.1.3.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object is the interface index of the interface disabled by a feature.
esErrDisIfStatusVlanIndex
1.3.6.1.4.1.171.17.45.1.3.1.2
VlanIdOrNoneThe VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must refer either to a specific VLAN, or to no VLAN. Note that a MIB object that is defined using this TEXTUAL-CONVENTION should clarify the meaning of 'no VLAN' (i.e., the special value 0). (0 | 1..4094) · Integer32 · hint d
This object indicates the VLAN in the given interface that has been error-disabled. If the physical interface is error-disabled then the value of this object is 0.
esErrDisIfStatusDisReasonIndex
1.3.6.1.4.1.171.17.45.1.3.1.3
EsErrDisReasonID1 = loopbackDetect2 = l2ptGuard3 = psecureViolation4 = stormControl5 = bpduProtect6 = arpRateLimit7 = dhcpRateLimit8 = ddm9 = scheduledShutdown10 = scheduledHibernation11 = duldAn integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving duld:D-LINK Unidirectional Link Detection · Integer32
This object indicates the reason which cause the interface disabled.
esErrDisIfStatusTimeLeft
1.3.6.1.4.1.171.17.45.1.3.1.4
Unsigned32 · seconds
This object indicates the time left that the interface will be automatically recovered. Value 0xFFFFFFFF indicates the interface won't be automatically recovered.
Trap details
esErrDisNotifyPortDisabledAssert
1.3.6.1.4.1.171.17.45.0.1
The trap is sent when a port enters into error disabled state.
esErrDisNotifyInfoPortIfIndex
1.3.6.1.4.1.171.17.45.1.6.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the port number of error disabled port.
esErrDisNotifyInfoReasonID
1.3.6.1.4.1.171.17.45.1.6.3
EsErrDisReasonID1 = loopbackDetect2 = l2ptGuard3 = psecureViolation4 = stormControl5 = bpduProtect6 = arpRateLimit7 = dhcpRateLimit8 = ddm9 = scheduledShutdown10 = scheduledHibernation11 = duldAn integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving duld:D-LINK Unidirectional Link Detection · Integer32
This object indicates the condition which cause a port/vlan enter into error disabled state.
esErrDisNotifyPortDisabledClear
1.3.6.1.4.1.171.17.45.0.2
The trap is sent when a port loop restarts after the interval time.
esErrDisNotifyInfoPortIfIndex
1.3.6.1.4.1.171.17.45.1.6.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the port number of error disabled port.
esErrDisNotifyInfoReasonID
1.3.6.1.4.1.171.17.45.1.6.3
EsErrDisReasonID1 = loopbackDetect2 = l2ptGuard3 = psecureViolation4 = stormControl5 = bpduProtect6 = arpRateLimit7 = dhcpRateLimit8 = ddm9 = scheduledShutdown10 = scheduledHibernation11 = duldAn integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving duld:D-LINK Unidirectional Link Detection · Integer32
This object indicates the condition which cause a port/vlan enter into error disabled state.
esErrDisNotifyVlanDisabledAssert
1.3.6.1.4.1.171.17.45.0.3
The trap is sent when a Port with a VID loop occurs.
esErrDisNotifyInfoPortIfIndex
1.3.6.1.4.1.171.17.45.1.6.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the port number of error disabled port.
esErrDisNotifyInfoReasonID
1.3.6.1.4.1.171.17.45.1.6.3
EsErrDisReasonID1 = loopbackDetect2 = l2ptGuard3 = psecureViolation4 = stormControl5 = bpduProtect6 = arpRateLimit7 = dhcpRateLimit8 = ddm9 = scheduledShutdown10 = scheduledHibernation11 = duldAn integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving duld:D-LINK Unidirectional Link Detection · Integer32
This object indicates the condition which cause a port/vlan enter into error disabled state.
esErrDisNotifyInfoLoopDetectedVID
1.3.6.1.4.1.171.17.45.1.6.2
VlanIdThe VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.Reference: IEEE Std 802.1Q 2003 Edition, Virtual Bridged Local Area Networks. (1..4094) · Integer32 · hint d
This object indicates the VLAN ID that has detected a loopback.
esErrDisNotifyVlanDisabledClear
1.3.6.1.4.1.171.17.45.0.4
The trap is sent when a Port with a VID restarts after the interval time.
esErrDisNotifyInfoPortIfIndex
1.3.6.1.4.1.171.17.45.1.6.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the port number of error disabled port.
esErrDisNotifyInfoReasonID
1.3.6.1.4.1.171.17.45.1.6.3
EsErrDisReasonID1 = loopbackDetect2 = l2ptGuard3 = psecureViolation4 = stormControl5 = bpduProtect6 = arpRateLimit7 = dhcpRateLimit8 = ddm9 = scheduledShutdown10 = scheduledHibernation11 = duldAn integer-value assigned to various conditions that can error disable a system entity. loopbackDetect: Loopback Detection l2ptGuard: L2 Protocol Tunneling. psecureViolation: Port Security violation. stormControl: (broadcast/multicast/unicast)storm control. bpduProtect: BPDU protected. arpRateLimit: ARP rate limit. dhcpRateLimit: DHCP rate limit. ddm: Digital Diagnostics Monitoring scheduledShutdown: Scheduled Port-shutdown by Power Saving scheduledHibernation:Scheduled Hibernation by Power Saving duld:D-LINK Unidirectional Link Detection · Integer32
This object indicates the condition which cause a port/vlan enter into error disabled state.
esErrDisNotifyInfoLoopDetectedVID
1.3.6.1.4.1.171.17.45.1.6.2
VlanIdThe VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.Reference: IEEE Std 802.1Q 2003 Edition, Virtual Bridged Local Area Networks. (1..4094) · Integer32 · hint d
This object indicates the VLAN ID that has detected a loopback.