esLbdCtrlInterval
1.3.6.1.4.1.171.17.46.1.1
INTEGER (1..32767) · Integer32 · seconds
This object indicates the interval in seconds at which LBD packets are transmitted.
DLINKES-LBD-MIB
2014-10-27
Download DLINKES-LBD-MIB.txt Open DLINKES-LBD-MIB.txt in a new tab
This MIB module defines objects for loopback detection.
SCALARS (10) · TABLES (1) · TRAPS (4)
Scalars (10)
Tables (1)
| Name | OID |
|---|---|
| esLbdIfCfgTable | 1.3.6.1.4.1.171.17.46.1.4 |
Traps (4)
| Name | OID |
|---|---|
| esLbdLoopOccurred | 1.3.6.1.4.1.171.17.46.0.1 |
| esLbdLoopRestart | 1.3.6.1.4.1.171.17.46.0.2 |
| esLbdVlanLoopOccurred | 1.3.6.1.4.1.171.17.46.0.3 |
| esLbdVlanLoopRestart | 1.3.6.1.4.1.171.17.46.0.4 |
END OF TOC
Scalar details
esLbdCtrlGlobalEnabled
1.3.6.1.4.1.171.17.46.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates whether the loopback detection is enabled globally.
esLbdCtrlMode
1.3.6.1.4.1.171.17.46.1.3
INTEGER1 = portBased2 = vlanBased · Integer32
This object indicates the loopback detection mode. portBased(1) - The loopback detection works in port-based mode. vlanBased(2) - The loopback detection works in vlan-based mode.
esLbdVlanCrlFirst2K
1.3.6.1.4.1.171.17.46.1.5.1
Dlink2kVlanListThis textual convention can specify a VLAN range of 2k VLANs, for example, 1 - 2048, 2049 - 4095, etc. Each octet within this value specifies a set of eight VLANs. The first octet specifies first 8 VLANs of the range specified in the description, the second octet specifies the next 8 VLANs, etc. Within each octet, the most significant bit represents the lowest numbered VLAN, and the least significant bit represents the highest numbered VLAN. Thus, each VLAN of the device is represented by a single bit within the value of this object. If the corresponding bit is '1' indicates that VLAN is included in the set of VLANs; '0' means the VLAN is not included. Note that if the length of this object is less than 256 octets, any 'missing' octets are assumed to contain the value zero. SIZE (0..256) · OCTET STRING
This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is enabled for loopback detection.
esLbdVlanCrlSecond2K
1.3.6.1.4.1.171.17.46.1.5.2
Dlink2kVlanListThis textual convention can specify a VLAN range of 2k VLANs, for example, 1 - 2048, 2049 - 4095, etc. Each octet within this value specifies a set of eight VLANs. The first octet specifies first 8 VLANs of the range specified in the description, the second octet specifies the next 8 VLANs, etc. Within each octet, the most significant bit represents the lowest numbered VLAN, and the least significant bit represents the highest numbered VLAN. Thus, each VLAN of the device is represented by a single bit within the value of this object. If the corresponding bit is '1' indicates that VLAN is included in the set of VLANs; '0' means the VLAN is not included. Note that if the length of this object is less than 256 octets, any 'missing' octets are assumed to contain the value zero. SIZE (0..256) · OCTET STRING
This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 2049 to 4095. If the bit is set to '1', then the VLAN is enabled for loopback detection.
esLbdActMode
1.3.6.1.4.1.171.17.46.1.6
INTEGER1 = shutdown2 = none · Integer32
This object indicates the loopback detection action mode. shundown(1) - When loop has been detected, the port will be shut down (disabled) in port-based mode, the traffic will be block on specific VLAN in VLAN-based mode. This is the default value. none(2) - When loop has been detected, the port will NOT be disabled in port-based mode, the traffic will NOT be block on specific VLAN in VLAN-based mode. Just send log and trap.
esLbdNotifyEnabled
1.3.6.1.4.1.171.17.46.1.7
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Set to 'true' to enable global SNMP notification for loopback detection feature. Setting the object to 'false' will disable SNMP notifications.
esLbdNotifyInfoIfIndex
1.3.6.1.4.1.171.17.46.1.8.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the interface id that has detected a loopback.
esLbdNotifyInfoVlanId
1.3.6.1.4.1.171.17.46.1.8.2
VlanIdThe VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.Reference: IEEE Std 802.1Q 2003 Edition, Virtual Bridged Local Area Networks. (1..4094) · Integer32 · hint d
This object indicates the vlan id that has detected a loopback.
esLbdAddressType
1.3.6.1.4.1.171.17.46.1.9
INTEGER1 = multicast2 = broadcast · Integer32
This object indicates the CTP packet's DA type. multicast(1) - Only multicast CTP packet will be sent.The CTP packet's DA is CF-00-00-00-00-00. broadcast(2) - Only broadcast CTP packet will be sent.The CTP packet's DA is FF-FF-FF-FF-FF-FF.
Table details
esLbdIfCfgTable
1.3.6.1.4.1.171.17.46.1.4
Index: esLbdIfCfgIndex
A list of loopback detection information entries.
esLbdIfCfgIndex
1.3.6.1.4.1.171.17.46.1.4.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the ifIndex of the physical port or port channel.
esLbdIfCfgEnabled
1.3.6.1.4.1.171.17.46.1.4.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates whether the loopback detection is enabled on the interface.
esLbdIfLoopStatus
1.3.6.1.4.1.171.17.46.1.4.1.3
INTEGER1 = normal2 = loop · Integer32
This object indicates whether the interface loopback status.
esLbdIfLoopVlans
1.3.6.1.4.1.171.17.46.1.4.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..255) · OCTET STRING · hint 255a
This object indicates the VLAN list that has detected a loopback.
Trap details
esLbdLoopOccurred
1.3.6.1.4.1.171.17.46.0.1
This trap is sent when an interface loop occurs.
esLbdNotifyInfoIfIndex
1.3.6.1.4.1.171.17.46.1.8.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the interface id that has detected a loopback.
esLbdLoopRestart
1.3.6.1.4.1.171.17.46.0.2
This trap is sent when an interface loop restarts after the interval time.
esLbdNotifyInfoIfIndex
1.3.6.1.4.1.171.17.46.1.8.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the interface id that has detected a loopback.
esLbdVlanLoopOccurred
1.3.6.1.4.1.171.17.46.0.3
This trap is sent when an interface with a VID loop occurs.
esLbdNotifyInfoIfIndex
1.3.6.1.4.1.171.17.46.1.8.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the interface id that has detected a loopback.
esLbdNotifyInfoVlanId
1.3.6.1.4.1.171.17.46.1.8.2
VlanIdThe VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.Reference: IEEE Std 802.1Q 2003 Edition, Virtual Bridged Local Area Networks. (1..4094) · Integer32 · hint d
This object indicates the vlan id that has detected a loopback.
esLbdVlanLoopRestart
1.3.6.1.4.1.171.17.46.0.4
This trap is sent when an interface loop with a VID restarts after the interval time.
esLbdNotifyInfoIfIndex
1.3.6.1.4.1.171.17.46.1.8.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
This object indicates the interface id that has detected a loopback.
esLbdNotifyInfoVlanId
1.3.6.1.4.1.171.17.46.1.8.2
VlanIdThe VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the REFERENCEd specification.Reference: IEEE Std 802.1Q 2003 Edition, Virtual Bridged Local Area Networks. (1..4094) · Integer32 · hint d
This object indicates the vlan id that has detected a loopback.