2017-07-10
Download DLINKES-MAC-AUTH-MIB.txt Open DLINKES-MAC-AUTH-MIB.txt in a new tab
This MIB contains managed objects for the MAC authentication application of the device.
SCALARS (4) · TABLES (1) · TRAPS (3)
| Name | OID |
|---|---|
| esMacAuthNotifEnabled | 1.3.6.1.4.1.171.17.153.1.1.1 |
| esMacAuthEnabled | 1.3.6.1.4.1.171.17.153.1.1.2 |
| esMacAuthPWD | 1.3.6.1.4.1.171.17.153.1.1.3 |
| esMacAuthUserName | 1.3.6.1.4.1.171.17.153.1.1.4 |
| Name | OID |
|---|---|
| esMacAuthIfTable | 1.3.6.1.4.1.171.17.153.1.2 |
| Name | OID |
|---|---|
| esMacAuthLoggedSuccess | 1.3.6.1.4.1.171.17.153.0.1 |
| esMacAuthLoggedFail | 1.3.6.1.4.1.171.17.153.0.2 |
| esMacAuthLoggedAgesOut | 1.3.6.1.4.1.171.17.153.0.3 |
END OF TOC
1.3.6.1.4.1.171.17.153.1.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
Set to 'true' to enable global SNMP notification for MAC authentication feature. Setting the object to 'false' will disable SNMP notifications.
1.3.6.1.4.1.171.17.153.1.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object enables ('true') or disables ('false') the MAC authentication globally.
1.3.6.1.4.1.171.17.153.1.1.3
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..16) · OCTET STRING · hint 255a
This object is used to set the password of authentication for local and radius authentication. When use client's MAC address as the password, a zero length string will be returned. or the string '******' will be returned.
1.3.6.1.4.1.171.17.153.1.1.4
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..16) · OCTET STRING · hint 255a
This object indicates the username of local and radius authentication. When use client's MAC address as the username, a zero length string will be returned.
1.3.6.1.4.1.171.17.153.1.2
Index: ifIndex
The table is used to configure the interface-specific settings of MAC authentication.
from IF-MIB
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.171.17.153.1.2.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object enables ('true') or disables ('false') the authentication state for a particular interface.
1.3.6.1.4.1.171.17.153.0.1
The trap is sent when a host has successfully logged in (passed MAC-based Access Control).
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.171.17.151.1.3.1.1.2
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object indicates the MAC address of the device associates with the authentication session.
1.3.6.1.4.1.171.17.151.1.3.1.1.8
VlanIdOrNoneThe VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must refer either to a specific VLAN, or to no VLAN. Note that a MIB object that is defined using this TEXTUAL-CONVENTION should clarify the meaning of 'no VLAN' (i.e., the special value 0). (0 | 1..4094) · Integer32 · hint d
This object indicates the authorized VLAN applied to the authentication session. Value zero indicates that no authorized VLAN has been applied, or it is not applicable.
1.3.6.1.4.1.171.17.153.0.2
The trap is sent when a host failed to pass MAC-based Access Control (login failed).
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.171.17.151.1.3.1.1.2
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object indicates the MAC address of the device associates with the authentication session.
1.3.6.1.4.1.171.17.151.1.3.1.1.8
VlanIdOrNoneThe VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must refer either to a specific VLAN, or to no VLAN. Note that a MIB object that is defined using this TEXTUAL-CONVENTION should clarify the meaning of 'no VLAN' (i.e., the special value 0). (0 | 1..4094) · Integer32 · hint d
This object indicates the authorized VLAN applied to the authentication session. Value zero indicates that no authorized VLAN has been applied, or it is not applicable.
1.3.6.1.4.1.171.17.153.0.3
The trap is sent when a MAC-based Access Control host aged out.
1.3.6.1.2.1.2.2.1.1
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
1.3.6.1.4.1.171.17.151.1.3.1.1.2
MacAddressRepresents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first. SIZE (6) · OCTET STRING · hint 1x:
This object indicates the MAC address of the device associates with the authentication session.
1.3.6.1.4.1.171.17.151.1.3.1.1.8
VlanIdOrNoneThe VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must refer either to a specific VLAN, or to no VLAN. Note that a MIB object that is defined using this TEXTUAL-CONVENTION should clarify the meaning of 'no VLAN' (i.e., the special value 0). (0 | 1..4094) · Integer32 · hint d
This object indicates the authorized VLAN applied to the authentication session. Value zero indicates that no authorized VLAN has been applied, or it is not applicable.