espsLinkDetectionEnabled
1.3.6.1.4.1.171.17.16.1.1.1
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates the state of power saving by link status.
DLINKES-POWER-SAVING-MIB
2017-06-16
Download DLINKES-POWER-SAVING-MIB.txt Open DLINKES-POWER-SAVING-MIB.txt in a new tab
The Structure of Power Saving Information for the proprietary enterprise.
Scalars (8)
Tables (2)
| Name | OID |
|---|---|
| espsIfEeeTable | 1.3.6.1.4.1.171.17.16.1.2.1 |
| espsPortShutdownScheduleTable | 1.3.6.1.4.1.171.17.16.1.3.3 |
END OF TOC
Scalar details
espsLengthDetectionEnabled
1.3.6.1.4.1.171.17.16.1.1.2
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates the state of power saving by cable length detection.
espsHibernationEnabled
1.3.6.1.4.1.171.17.16.1.1.3
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates the state of powre saving by scheduled system hibernation. Note: For stackable devices, the hibernation function only can be supported on the standalone mode.
espsDimLedEnabled
1.3.6.1.4.1.171.17.16.1.1.4
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates the state of power saving by scheduled dimming LED.
espsLedAdminEnabled
1.3.6.1.4.1.171.17.16.1.1.5
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates the administrative state of LED of all ports.
espsPortShutdownEnabled
1.3.6.1.4.1.171.17.16.1.1.6
TruthValue1 = true2 = falseRepresents a boolean value. · Integer32
This object indicates the state of power saving by scheduled port shutdown.
espsHibernationTimeRange
1.3.6.1.4.1.171.17.16.1.3.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a
This object indicates the time-range profile for system hibernation schedule. A zero length string indicates the schedule is not specified.
espsDimLedTimeRange
1.3.6.1.4.1.171.17.16.1.3.2
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a
This object indicates the time-range profile for dimming LED schedule. A zero length string indicates the schedule is not specified.
Table details
espsIfEeeTable
1.3.6.1.4.1.171.17.16.1.2.1
Index: ifIndex
This table consists of a list of EEE (Energy-Efficient Ethernet) state information for ports.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
espsIfEeeStatus
1.3.6.1.4.1.171.17.16.1.2.1.1.2
INTEGER1 = enabled2 = disabled3 = notAvailable · Integer32
This object indicates the EEE status on an interface. To set espsIfEeeStatus to notAvailable has no effect. When read the value of 'notAvailable' means EEE is not supported on the port.
espsPortShutdownScheduleTable
1.3.6.1.4.1.171.17.16.1.3.3
Index: ifIndex
A list of the shutdown configurations of the power saving.
from IF-MIB
ifIndex
InterfaceIndexA unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. (1..2147483647) · Integer32 · hint d
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
espsPortShutdownTimeRange
1.3.6.1.4.1.171.17.16.1.3.3.1.1
DisplayStringRepresents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - the graphics characters (32-126) are interpreted as US ASCII - NUL, LF, CR, BEL, BS, HT, VT and FF have the special meanings specified in RFC 854 - the other 25 codes have no standard interpretation - the sequence 'CR LF' means newline - the sequence 'CR NUL' means carriage-return - an 'LF' not preceded by a 'CR' means moving to the same column on the next line. - the sequence 'CR x' for any x other than LF or NUL is illegal. (Note that this also means that a string may end with either 'CR LF' or 'CR NUL', but not with CR.) Any object defined using this syntax may not exceed 255 characters in length. SIZE (0..32) · OCTET STRING · hint 255a
This object indicates the name of time-range profile. A zero length string indicates the schedule is not specified.